English  |  正體中文  |  简体中文  |  全文筆數/總筆數 : 78937/78937 (100%)
造訪人次 : 39610922      線上人數 : 229
RC Version 7.0 © Powered By DSPACE, MIT. Enhanced by NTU Library IR team.
搜尋範圍 查詢小技巧:
  • 您可在西文檢索詞彙前後加上"雙引號",以獲取較精準的檢索結果
  • 若欲以作者姓名搜尋,建議至進階搜尋限定作者欄位,可獲得較完整資料
  • 進階搜尋


    請使用永久網址來引用或連結此文件: http://ir.lib.ncu.edu.tw/handle/987654321/8045


    題名: 多級威能濾波器之應用於向上鏈結多載波分碼多重進接系統之接收器設計;MC-CDMA Uplink Receiver Designs with Multistage Wiener Filters
    作者: 王政鴻;Cheng-Hung Wang
    貢獻者: 通訊工程研究所
    關鍵詞: 多載波分碼多重進接系統;多級威能濾波器;Multistage Wiener Filters;MC-CDMA
    日期: 2004-06-14
    上傳時間: 2009-09-22 11:16:38 (UTC+8)
    出版者: 國立中央大學圖書館
    摘要: 在本篇論文我們提供一個結合多載波分碼多重進階系統和多級威能濾波器的方法,在假設載波頻率為已知的情況下,設計其接收端。在之後的章節會有這兩種理論的介紹,也有其特性的分析。緊接之後為本篇論文所使用的方法介紹。從本論文的模擬結果可發現,本論文所提供的方法比使用威能濾波器以及逼零演算法的系統有更低的誤差。此外,我們將接收端延伸到多根天線的系統,接著討論及比較其模擬結果。 In this thesis, we provide a method which combines multicarrier code division multiple access with multistage Wiener filter to design the receiver with the assumption of perfect synchronization of the carrier frequency. The introduction and features of them are presented later, and so are the manners which we supply. The outcomes of the simulations show that this method provides better performance than the system with Wiener filter or zero-forcing. Further, we extend this structure to multi-antenna for receiver, and the results are discussed according to the comparison of simulations.
    顯示於類別:[通訊工程研究所] 博碩士論文

    文件中的檔案:

    檔案 大小格式瀏覽次數


    在NCUIR中所有的資料項目都受到原著作權保護.

    社群 sharing

    ::: Copyright National Central University. | 國立中央大學圖書館版權所有 | 收藏本站 | 設為首頁 | 最佳瀏覽畫面: 1024*768 | 建站日期:8-24-2009 :::
    DSpace Software Copyright © 2002-2004  MIT &  Hewlett-Packard  /   Enhanced by   NTU Library IR team Copyright ©   - 隱私權政策聲明