Workspace Characterization of a 3-RRR Spherical Parallel Mechanism

NCU Institutional Repository > 工學院 > 機械工程研究所 > 博碩士論文 > Item 987654321/84307

請使用永久網址來引用或連結此文件: http://ir.lib.ncu.edu.tw/handle/987654321/84307

題名:	Workspace Characterization of a 3-RRR Spherical Parallel Mechanism
作者:	黃尉愷;Huang, Wei-Kai
貢獻者:	機械工程學系
關鍵詞:	球面平行機構;遠端運動中心;工作範圍;Spherical Parallel Mechanism;Remote Center of Motion;Workspace
日期:	2020-07-14
上傳時間:	2020-09-02 19:00:15 (UTC+8)
出版者:	國立中央大學
摘要:	當為了進行特定的運動而設計機構時，需要相當了解其運動的範圍。工作範圍是指一個機構其終端可到達的區域。這方面在文獻中受到很大的重視。對工作範圍的分析可依靠對分析法或數值方法。一個工作範圍沒辦法以幾何圖形描述的複雜機構會使用分析法來分析。這方法用於驗證已知工作範圍上每個點的機構運動模型。優化演算法若使用這方法會耗費時間。一個複雜機構3-RRR球面平行機構的工作範圍是以數值分析法來研究他的幾何形狀。對此工作範圍的視覺分析，這是第一次使用不規則勒洛三角形來趨近。其圖像的幾何參數允許的尺寸標記的是可定義的。許多的演算法被寫進程式以確認大量使用不同參數設定的機構相對應的參數值。藉由收集這些資料，可發現一連串的機構設計參數與其工作範圍間的關係性。之後則分析這些模型的準確度。 ;As mechanisms are designed to generate a certain motion, it is important to have a good understanding of their range of motion. The workspace is the zone that a mechanism can reach with its end effector. This aspect has been subject to a lot of attention in the literature. Its analysis can rely on analytical or numerical methods. Complex mechanisms which workspace cannot be accurately represented by a geometrical figure will be analyzed using analytical methods. It consists in verifying the mechanism kinematic model for every points of a given workspace. Such a method can be time consuming if used in an optimization algorithm. The workspace of a complex mechanism, the 3-RRR Spherical Parallel Mechanism is analyzed through numerical method to study its geometry. Based on the visual analysis of this workspace, it is first approximated using an Irregular Spherical Reuleux Triangle. The geometrical parameters of this figure allowing its dimensioning are defined. Several algorithms are programmed in order to identify the value of these corresponding parameters for several mechanisms of different design parameters. Using all collected data, a series of relationship are found between the mechanism design parameters and the size of its generated workspace. The accuracy of these models is then evaluated.
顯示於類別:	[機械工程研究所] 博碩士論文

文件中的檔案:

檔案	描述	大小	格式	瀏覽次數
index.html		0Kb	HTML	84	檢視/開啟

在NCUIR中所有的資料項目都受到原著作權保護.

社群 sharing

資料載入中.....