雙頻微型化六埠網路之應用;Compact Dual-Band Six-Port Network and It’s application

NCU Institutional Repository > 資訊電機學院 > 電機工程研究所 > 博碩士論文 > Item 987654321/92632

jsp.display-item.identifier=請使用永久網址來引用或連結此文件: http://ir.lib.ncu.edu.tw/handle/987654321/92632

题名:	雙頻微型化六埠網路之應用;Compact Dual-Band Six-Port Network and It’s application
作者:	李品諾;Lee, Pin-No
贡献者:	電機工程學系
关键词:	雙頻六埠網路;訊號來向偵測器;六埠網路接收機;解調變;向量誤差強度
日期:	2023-05-05
上传时间:	2023-10-04 16:07:11 (UTC+8)
出版者:	國立中央大學
摘要:	本論文以微型化雙頻六埠網路接收機及來向偵測器之研製為目標，發展由微型化雙頻六埠網路、功率偵測器與類比減法器組成微型化雙頻六埠網路接收機前端電路，並於後端接上數位解調變軟體即可還原數位訊號；或於後端經由公式運算即可當成來向偵測器，偵測來向角。此2.45/5.94GHz六埠網路接收機電路面積為53mm×48.5mm，在2.45GHz 的電氣尺寸為0.39 λ0×0.36λ0，在5.94GHz 的電氣尺寸為0.87λ0×0.87λ0。為了同時達到微型化與雙頻的效果，藉由橋式T線圈(BTC)代替傳輸線以大幅縮小電路面積，實現雙頻功率分配器和雙頻分支線耦合器，並組成雙頻六埠網路，最終實現在積體被動製程(IPD)上。在2.45GHz的操作頻率下植入損耗介於7.7±0.6 dB，輸出、輸入反射損耗大於16.7 dB相位差小於2.9°，在5.8GHz的操作頻率下植入損耗介於9±0.7 dB，輸出、輸入反射損耗大於17.3 dB相位差小於7.2°，電路面積僅5.85mm*5.47mm。本研究測試在不同條件下此接收機在QPSK、16-QAM、64-QAM等性能，以向量誤差強度於小於6%為標準，在2.45GHz，QPSK解調的動態範圍為-27.7~-1.5dBm、16-QAM解調的動態範圍為-30~2dBm、64-QAM解調的動態範圍為-27.7~-1.7dBm；在5.94GHz，QPSK解調的動態範圍為-24.15~2.15dBm、16-QAM解調的動態範圍為-24.15~3.85dBm、64-QAM解調的動態範圍-26.15~3.85dBm。若將六埠網路中的輸入端換成兩接收天線，且兩個接收天線彼此有一定距離，即可構成訊號來向偵測器。在2.45GHz的操作頻率下，來向角的偵測誤差最大為來向角-60°，誤差值為3°，其他角度皆小於1.5°。;The goal of this work is the development of dual-band six-port receiver and direction of angle detector with compact size. The proposed miniaturized dual-band six-port network receiver front-end composed of a miniaturized dual-band six-port network, four power detectors, and two analog subtractors. It can be connected with the digital demodulation software to restore the digital modulated signal, or it can be used as a direction of angle (DOA) detector through proper calculation at the back end . The circuit size of the 2.45/5.94GHz six-port receiver is 53mm×48.5mm, which corresponds to an electrical size 0.39 λ0×0.36λ0 at f0 = 2.45GHz, or 0.87λ0×0.87λ0 at f0 = 5.94GHz. In order to achieve miniaturization and dual-band operateion at the same time, bridged-T coil is used to realize the dual-band power divider and the dual-band branch line coupler, and form a dual-band six-port network in the integrated passive device (IPD) process. The circuit size is only 5.85 mm×5.47 mm. The corresponding electrical size is around 0.0477 λ0× 0.0446 λ0 at 2.45 GHz and 0.113 λ0×0.105 λ0 at 5.8 GHz. At 2.45GHz, the measured insertion loss is 7.7±0.6 dB, the input and output reflection loss is greater than 16.7dB, and the phase difference is less than 2.9. At 5.94GHz, the measured insertion loss is 9±0.7 dB, the input and output reflection loss is greater than 17.3dB, and the phase difference is less than 7.2°. The performance of the proposed six-port receiver is investigated with differenct modulation schemes including QPSK, 16-QAM and 64-QAM. At 2.45GHz, the dynamic range of QPSK modulation is -27.7 to -1.5dBm, the dynamic range of 16-QAM modulation is -30 to 2dBm, and the dynamic range of 64-QAM modulation is -27.7 to -1.7dBm. At 5.94GHz, the dynamic range of QPSK modulation is -24.15 to 2.15dBm, the dynamic range of 16-QAM modulation is -24.15 to 3.85dBm, and the dynamic range of 64-QAM modulation is -26.15 to 3.85dBm. By connecting the input port of the six-port network to the two receiving antennas with a certain distance between them, a DOA detector can be realized. At 2.45GHz, the maximum angle error is at -60°with an error value of 3°, while the errors of other angles are less than 1.5°.
显示于类别:	[電機工程研究所] 博碩士論文

文件中的档案:

档案	描述	大小	格式	浏览次数
index.html		0Kb	HTML	74	检视/开启

在NCUIR中所有的数据项都受到原著作权保护.

社群 sharing

数据加载中.....