圓柱型蝸桿之旋風銑削刀具設計及切削模擬;Design Whirling Tool and Cutting Simulation for Cylindrical Worm Using a Whirling process

NCU Institutional Repository > 工學院 > 機械工程研究所 > 博碩士論文 > Item 987654321/93884

請使用永久網址來引用或連結此文件: http://ir.lib.ncu.edu.tw/handle/987654321/93884

題名:	圓柱型蝸桿之旋風銑削刀具設計及切削模擬;Design Whirling Tool and Cutting Simulation for Cylindrical Worm Using a Whirling process
作者:	葉秀詮;YE, XIU-QUAN
貢獻者:	機械工程學系
關鍵詞:	旋風銑削;圓柱型蝸桿;切削模擬;Whirling Milling;Cylindrical Worm;VERICUT;Cutting Simulation
日期:	2023-12-19
上傳時間:	2024-09-19 17:44:28 (UTC+8)
出版者:	國立中央大學
摘要:	本論文依照ZA型、ZN型、ZI型、ZK型、ZC型蝸桿之切削方式，基於齒輪原理和微分幾何理論，分別推導出五型蝸桿之齒面數學模式，透過蝸桿之齒面數學模式，配合旋風銑削刀具之切削機構關係與嚙合方程式，建立出五型旋風銑削刀具之齒面數學模式。透過所建立出之旋風銑削刀具輪廓進行刀具曲線之擬合，最後經由切削機構關係與嚙合方程式建立出五型蝸桿之齒形輪廓。為了進行旋風銑削切削模擬，首先由Solidworks建立旋風銑削之機台模型，將其匯入VERICUT軟體進行各軸相對運動關係之設置，接著將所設計之旋風銑削刀具設置於刀具環治具內，使用控制器840 D驅動所規劃之NC程式進行加工模擬。最後可獲得旋風銑削之五型蝸桿三維模型，再將此五型蝸桿與理論型蝸桿，透過軸向截面齒形比對，驗證流程與推導之正確性。 ;This paper, based on the cutting methods of the ZA, ZN, ZI, ZK, and ZC types of worm gears, derives mathematical models for the tooth profiles of these five types of worm gears using the principles of gears and differential geometry theory. Through these mathematical models for the worm gear tooth profiles, and in conjunction with the cutting mechanism relationships and meshing equations of whirling milling tools, mathematical models for the tooth profiles of the five types of whirling milling tools are established. The tool profiles are fitted using the established whirling milling tool mathematical models, and finally, mathematical models for the tooth profiles of the five types of worm gears are developed through the cutting mechanism relationships and meshing equations. To conduct the whirling milling cutting simulation, a machine model for whirling milling is initially created using Solidworks. This machine model is then imported into VERICUT software for configuring the relative motion relationships between various axes. Subsequently, the designed whirling milling tool is placed within a tool ring fixture. The NC program, as per the actual machining paths, is executed by Controller 840 D for the simulation. Ultimately, this process results in obtaining three-dimensional models of the five types of cyclone-milled worm gears. These models are then used for axial cross-sectional tooth profile comparisons between the five types and theoretical worm gears, verifying the accuracy of the procedures and derivations.
顯示於類別:	[機械工程研究所] 博碩士論文

文件中的檔案:

檔案	描述	大小	格式	瀏覽次數
index.html		0Kb	HTML	11	檢視/開啟

在NCUIR中所有的資料項目都受到原著作權保護.

社群 sharing

資料載入中.....