中大機構典藏-NCU Institutional Repository-提供博碩士論文、考古題、期刊論文、研究計畫等下載:Item 987654321/95663
English  |  正體中文  |  简体中文  |  全文筆數/總筆數 : 80990/80990 (100%)
造訪人次 : 41244987      線上人數 : 831
RC Version 7.0 © Powered By DSPACE, MIT. Enhanced by NTU Library IR team.
搜尋範圍 查詢小技巧:
  • 您可在西文檢索詞彙前後加上"雙引號",以獲取較精準的檢索結果
  • 若欲以作者姓名搜尋,建議至進階搜尋限定作者欄位,可獲得較完整資料
  • 進階搜尋


    請使用永久網址來引用或連結此文件: http://ir.lib.ncu.edu.tw/handle/987654321/95663


    題名: N型鎂矽錫熱電材料之接觸金屬及模組製作;Fabrication of Contact Metals and Modules for N-type Mg2(SiSn) Thermoelectric Materials
    作者: 盧俊廷;Lu, Chun-Ting
    貢獻者: 電機工程學系
    關鍵詞: 鎂矽錫;熱電材料;熱電轉換效應;熱電優值;粉末冶金製程;熱電模組
    日期: 2024-07-23
    上傳時間: 2024-10-09 17:07:54 (UTC+8)
    出版者: 國立中央大學
    摘要: 隨著時代變遷,AI及電動車迅速發展,伴隨能源大量消耗,石化能源日益減少及環保意識抬頭,人們開始積極探索替代能源,可再生能源也受到重視。熱電材料是一種可再生能源的應用,擁有舉足輕重地位。熱電元件能將熱能直接轉換為電能,或反向將電能轉換為熱能。這種雙向能量轉換的能力使其在能源回收、冷卻系統以及可再生能源應用中展現了巨大的潛力。
    本實驗利用N型Mg2(SiSn)熱電材料製作出PN元件並且使40對PN元件焊接成大型熱電模組。Mg2Si混合固定比例Mg2Sn,透過粉末摻雜、混合、放上接觸金屬(焊接用)、冷壓成型、高溫燒結等步驟製作出N型Mg2(SiSn)熱電元件,同時在此階段進行電性量測和分析,進而確定粉末摻雜配比及合適焊接的接觸金屬。再來與實驗室同學研究的P型Mg2(SiSn)熱電塊材搭配,組成單對PN型熱電元件。最後我們選定擁有優異熱電性能的PN元件,大量製作單對PN元件,焊接使其串接成大型模組。;As technology advances, AI and electric vehicles are rapidly developing. The increasing energy consumption and depletion of fossil fuels, coupled with rising environmental awareness, have spurred interest in alternative energy sources, particularly renewable energy. Thermoelectric materials, which can convert heat into electricity and vice versa, play a critical role in this field, offering potential in energy recovery, cooling systems, and renewable energy applications.
    This experiment builds on previous research with N-type Mg2(SiSn) thermoelectric materials. We prepared N-type thermoelectric components by mixing a fixed proportion of Mg2Si with Mg2(SiSn), followed by powder doping, mixing, placing contact metals, cold pressing, and high-temperature sintering. Electrical measurements and analyses were conducted to determine the optimal doping ratios and contact metals. These N-type components were then paired with P-type Mg2(SiSn) materials to form single PN-type thermoelectric devices. Finally, we selected the best-performing PN devices and produced them in large quantities. These devices were welded into a large-scale module, achieving an output voltage of 1V.
    顯示於類別:[電機工程研究所] 博碩士論文

    文件中的檔案:

    檔案 描述 大小格式瀏覽次數
    index.html0KbHTML17檢視/開啟


    在NCUIR中所有的資料項目都受到原著作權保護.

    社群 sharing

    ::: Copyright National Central University. | 國立中央大學圖書館版權所有 | 收藏本站 | 設為首頁 | 最佳瀏覽畫面: 1024*768 | 建站日期:8-24-2009 :::
    DSpace Software Copyright © 2002-2004  MIT &  Hewlett-Packard  /   Enhanced by   NTU Library IR team Copyright ©   - 隱私權政策聲明