以單刀雙擲帶通濾波器實現高整合度射頻前端收發系統

以作者查詢圖書館館藏

、以作者查詢臺灣博碩士

、以作者查詢全國書目

、勘誤回報

、線上人數：15

、訪客IP：3.136.18.181

姓名

王品傑(Ping-Chieh Wang) 查詢紙本館藏

畢業系所

電機工程學系

論文名稱

以單刀雙擲帶通濾波器實現高整合度射頻前端收發系統
(RF Front-end System Integration by Single-Pole-Double-Throw BPF)

相關論文

★ 用於行動上網裝置之智慧型陣列天線	★ 吸收式帶止濾波器之研製
★ 一維及二維切換式波束掃描陣列天線	★ 寬頻微型化六埠網路接收機
★ 具有良好選擇度的寬頻吸收式帶止濾波器	★ 微小化吸收式帶止濾波器之通帶改善
★ 共面波導帶通濾波器之研製	★ 微帶耦合線帶通濾波器與雙工器研製
★ 宇宙微波背景輻射陣列望遠鏡接收機之校準信號源研製	★ K-Band及Q-Band毫米波帶通濾波器設計
★ 薄膜製程射頻被動元件設計	★ 微波帶通低雜訊放大器設計
★ 積體式微波帶通濾波器之研製	★ 應用於高位元率無線傳輸系統之V頻段漸進式開槽天線陣列
★ 以多重耦合線實現多功能帶通濾波器	★ 以多重耦合線實現單端至平衡帶通濾波器之分析與設計

檔案

[Endnote RIS 格式]

[Bibtex 格式]

[相關文章]

[文章引用]

[完整記錄]

[館藏目錄]

[檢視]

[下載]

本電子論文使用權限為同意立即開放。
已達開放權限電子全文僅授權使用者為學術研究之目的，進行個人非營利性質之檢索、閱讀、列印。
請遵守中華民國著作權法之相關規定，切勿任意重製、散佈、改作、轉貼、播送，以免觸法。

摘要(中)

本論文研究主軸為具高整合性射頻前端收發系統設計。首先提出新式單刀雙擲帶通濾波器架構，藉由帶通濾波器與單刀雙擲切換器的整合式設計，進而改善傳統分時多工射頻通訊系統必備之切換器與濾波器於串接時，各級間不匹配之損耗，並達到縮小電路尺寸之目的。本研究係以耦合微帶線帶通濾波器出發，引入二極體負載達到切換功能，透過首段耦合線長度的控制，再直接利用T 接面將兩濾波器並接，即可得到具單刀雙擲功能之帶通濾波器。本架構設計關鍵在首段耦合線長度，後端電路實現方式可任意選用，提供設計者高自由度，例如可進一步將單刀雙擲帶通濾波器結合平衡至不平衡轉換器，大幅提高整合度。再者，運用濾波器可匹配至複數阻抗之特性，將低雜訊放大器輸入級匹配電路設計為具切換功能之帶通濾波器，而可將單刀雙擲切換器、帶通濾波器、低雜訊放大器三者整合於單一電路元件中，對於射頻前端電路的微小化，效能提昇，與組裝複雜度降低均有直接助益。
本研究透過高整合度的電路架構及簡潔的設計流程，可整合多種射頻前端功能方塊於同一電路中，目前已達成整合部份射頻前端主被動電路之設計目標，同時也為未來進一步的改良提供更多可能性。

摘要(英)

In this study, highly integrated RF frontend designs are presented. First, the novel bandpass single-pole-double-throw (SPDT) RF switch design that combines the functions of bandpass filter (BPF) and SPDT is proposed. As a result, both the circuit size and mismatch losses associated with the cascade of these two components in the RF frontend of conventional time-division-duplex system can be reduced. The proposed SPDT BPF design starts from a microstrip parallel-coupled BPF loaded with a p-i-n diode at the end of first coupled-line. In this way, the BPF becomes switchable. By properly chosen the length of first coupled-line, two switchable BPFs can be directly connected to form a SPDT BPF. In addition, since only the first coupled-line is determined by the switch function, the subsequent filter stages can be arbitrarily designed such them more functions can be integrated and more design freedom is obtained. For instance, the integration of balun function to the bandpass SPDT switch is demonstrated, such that the level of integration is further improved. Moreover, the design technique of BPF with complex load is applied to the matching network design of a Low Noise Amplifier (LNA). In this way, a SPDT switch, two BPF’s, and a LNA are all integrated in a single circuit. It will help reducing the circuit size, mismatch losses, and complexity in module for RF frontend design.
The proposed SPDT BPF features compact circuit structure and simple design flow, and is capable of further integration of other circuit components. The integration of several active and passive function blocks in the RF frontend has been achieved. The proposed circuit structure and design method also paves the way for further improvement in the near future.

關鍵字(中)

★ 射頻前端系統
★ 單刀雙擲帶通濾波器
★ 單刀雙擲

關鍵字(英)

★ SPDT
★ Single-Pole-Double-Throw
★ SPDT BPF
★ RF Front-end System

論文目次

論文摘要 i
Abstract ii
致謝 iii
圖目錄 v
表目錄 viii
第一章　簡介 1
1.1 研究動機 1
1.2　相關文獻 3
1.3 章節介紹 6
第二章單刀雙擲帶通濾波器原理 7
2.1 電路架構 7
2.2 設計理論 10
2.3 結論 26
第三章　單刀雙擲帶通濾波設計 27
3.1 射頻前端收發系統設計 27
3.2 單刀雙擲帶通濾波器研製 28
3.2.1帶通濾波器設計 28
3.2.2實做結果 34
3.3 具平衡至非平衡轉換器之單刀雙擲帶通濾波器 40
3.3.1 寬止帶耦合線帶通濾波器研製 41
3.3.2 帶通平衡至非平衡轉換器研製 44
3.3.3 實做結果 47
3.4 總結 54
第四章　整合低雜訊放大器之單刀雙擲帶通濾波器設計 56
4.1 帶通低雜訊放大器設計理論及流程 57
4.2 整合低雜訊放大器之單刀雙擲帶通濾波器研製 64
4.2.1 帶通低雜訊放大器研製 65
4.2.2 單刀雙擲帶通低雜訊放大器研製 72
4.3總結 83
第五章結論 84
Publication List 87
參考文獻 88

參考文獻

[1]K.-H. Lee, Z. Jin, and K.-H. Koo, “High linearity SPDT switch for dual band wireless LAN applications,” in Proc. Asia-Pacific Microwave Conf., Dec. 2005.
[2]C.-Y. Ou, C.-Y. Hsu, H.-R. Lin, H.-R. Chuang , “A high-isolation high-linearity 24-GHz CMOS T/R switch in the 0.18-μm CMOS process,” in Proc. Eur. MIC Conf. 2009
[3]J. Kim, W. Ko, S.-H. Kim, J. Jeong, Y. Kwon, “A high-performance 40–85 GHz MMIC SPDT switch using FET-Integrated transmission line Structure, ” IEEE Microwave Wireless Compon. Lett., vol. 13, no. 12, pp.505-507, Dec. 2003
[4]K.-Y. Lin, W.-H. Tu, P.-Y. Chen, H.-Y. Chang, H. Wang, R.-B. Wu, “Millimeter-wave MMIC passive HEMT switches using traveling-wave concept,” IEEE Trans. Microwave Theory Tech., vol. 52, no. 8, pp.1798-1808, Aug. 2004.
[5]Y. A. Atesal, B. Cetinoneri, and G. M. Rebeiz, “ Low-loss 0.13-μm CMOS 50 – 70 GHz SPDT and SP4T switches, ” IEEE Radio Frequency Integrated Circuits (RFIC) Symposium, pp.43-46 ,June 2009
[6]Y. Tsukahara, H. Amasuga, S. Goto, T. Oku, and T. Ishikawa , “ 60GHz high isolation SPDT MMIC switches using shunt pHEMT resonator , ” IEEE MTT-S Int. Microwave Symp. Dig., Jun. 2008, pp. 1541–1544.
[7]Y.-S. Lin, P.-Y. Chang, Y.-S. Hsieh, "Compact electronically switchable parallel-coupled microstrip bandpass filter with wide stopband," IEEE Microwave Wireless Compon. Lett., vol. 18, no.4, pp.254-256, April. 2008
[8]K.-Y. Lin, Y.-J. Wang, D.-C. Niu, H. Wang, “Millimeter-wave MMIC single-pole-double-throw Passive HEMT switches using impedance-transformation networks, ” IEEE Trans. Microwave Theory Tech., vol. 51, no. 4, pp. 1076-1085, Apr. 2003.
[9]S.-F. Chang, J.-L. Chen, H.-W. Kuo, H.-Z. Hsu , “A filter synthesis method applied to millimeter-wave distributed switch design,” in Proc. Eur. Microwave Conf. 2003
[10]R.-B. Lai, S.-F. Chao, Z.-M. Tsai, J. Lee, H. Wang, “ Topology analysis and design of passive HEMT millimeter-wave multiple-port switches,” IEEE Trans. Microwave Theory Tech., vol. 56, no. 7, pp. 1545-1554, Jul. 2008.
[11]S.-F. Chao, C.-H. Wu, Z.-M. Tsai, H. Wang, C.-H. Chen, “Electronically switchable bandpass filters using loaded stepped-impedance resonators,” IEEE Trans. Microwave Theory Tech., vol. 54, no. 12, pp. 41931-4201, Dec. 2006.
[12]S.-F. Chao, C.-C. Kuo, Z.-M. Tsai, H. Wang, “A 40-GHz MMIC SPDT bandpass filter integerated switch,” in IEEE MTT-S Int. Microwave Symp. Dig., Jun. 2007, pp. 483–486.
[13]S.-F. Chao, C.-C. Kuo, Z.-M. Tsai, K.-Y. Lin, H. Wang , “ 40-GHz MMIC SPDT and multiple-port bandpass filter-integrated switches, ” IEEE Trans. Microwave Theory Tech., vol. 55, no. 3, pp. 2691-2699, Dec. 2007.
[14]Z.-M. Tsai, Y.-S. Jiang, J. Lee, K.-Y. Lin, H. Wang, “Analysis and design of bandpass single-pole–double-throw FET filter-integrated switches,” IEEE Trans. Microwave Theory Tech., vol. 55, no. 8, pp. 1601-1610, Aug. 2008.
[15]J. Lee, R.-B. Lai, K.-Y. Lin, C.-C. Chiong, and H. Wang, “A Q-band low loss reduced-size filter-integrated SPDT switch using 0.15μm- MHEMT technology,” IEEE MTT-S Int. Microwave Symp. Dig., Jun. 2008, pp. 551–554.
[16]J. Lee, Z.-M. Tsai, H. Wang, “A band-pass filter-integrated switch using field-effect transistors and its power analysis,” IEEE MTT-S Int. Microwave Symp. Dig., Jun. 2006, pp. 768–771.
[17]游秋雯, “以多重耦合線實現多功能帶通濾波器” 碩士論文, 國立中央大學, 2010.
[18]鍾育軒, “微波帶通低雜訊放大器設計” 碩士論文, 國立中央大學, 2009.
[19]S.-B. Cohn, “Parallel-coupled transmission-line-resonator filters,” IEEE Trans. Microwave Theory Tech., vol. 6, no. 2, pp. 223-231, Apr. 1958.
[20]S.-C. Lin, T.-N. Kuo, Y.-S. Lin, C.-H. Chen, “Novel coplanar-waveguide bandpass filters using loaded air-bridge enhanced capacitors and broadside-coupled transition structures for wideband spurious suppression,” IEEE Trans. Microwave Theory Tech., vol.54, no.8, pp. 3359-3369, Aug. 2006.
[21]J. S. Hong, M. J. Landcaster, Microstrip Filters for RF/Microwave Application, John　Wiley & Sons, Inc., 2001.
[22]D. M. Pozar, Microwave Engineering, 3rd Edition, John Wiley & Sons, Inc., 2005.
[23]G. L. Matthaei, L. Yong and E. M. T. Jones, Microwave Filters, Impedance-Matching Networks, and Coupling Structures, McGraw-Hill, Inc., 1980.
[24]G. Gonzalez, Microwave Transistor Amplifier Analysis and Design, Second Edition, Prentice Hall, New Jersey, 1997.
[25]C.-L. Tsai and Y.-S. Lin, “Analysis and design of new single-to-balanced multi-coupled line bandpass filters using low temperature co-fired ceramic technology,” IEEE Trans. Microwave Theory Tech., vol. 56, no.12, pp. 2902-2912, Dec. 2008.
[26]Y.-S. Lin, C.-C. Liu, K.-M. Li, C. H. Chen, “Design of an LTCC tri-band transceiver module for GPRS mobile applications,” IEEE Trans. Microwave Theory Tech., vol. 52, no. 12, pp. 2718-2724, Dec. 2004.
[27]SKYWORKS, SMP-1345, Very Low Capacitance, Plastic Packaged Silicon PIN Diodes ,Available: http://www.skyworksinc.com/uploads/documents/200046H.pdf

指導教授

林祐生(Yo-Shen Lin)

審核日期

2010-8-20

推文