參考文獻 |
[1] P. Luby, "Zero carbon power generation," Petroleum & Coal, vol. 46, pp. 1-16, 2004.
[2] R.L Jones, G.E. Keller II and R.C. Wells, ”Rapid pressure swing adsorption process with high enrichment factor”, U.S. Patent 4,194,892,assigend to Union Carbide Corporation,1980.
[3] C.W. Skarstrom, “Method and apparatus for fractionating gaseous mixtures by adsorption”, U.S. Patent 2,944,627, assigned to esso research and engineering Company, 1960.
[4] P. G. de Montgareuil and D. Domine, “Process for separating a binary gaseous mixture by adsorption”, U.S. Patent 3,155,468, assigned to Societe L`Air Liquide, Paris, 1964.
[5] R. T. Yang, Gas Separation by Adsorption Processes., Imperial College Press., London, 1997.
[6] N.H. Berlin, “Method for providing an oxygen-enriched environment”, U.S. Patent 3,280,536, assigned to Esso Research and Engineering Company, 1966.
[7] G. Heinze, Belgain Patent 613,267, assigned to Farbenfabriken Bayer A. G., 1962.
[8] D.E. Kowler and R.H. Kadlec, “The Optimal control of a periodic adsorber: Part I. Experiment”, AIChE J., vol. 31, no. 6, pp. 1207-1212, 1972.
[9] T. Tamura, “Absorption process for gas separation”, U.S. Patent 3,797,201, assigned to T. Tamura, Tokyo, Japan, 1974.
[10] S. Sircar and T.C. Golden, “Purification of hydrogen by pressure swing adsorption”, Separation Science and Technology, vol. 35, no. 5, pp. 667-687, 2000.
[11] R. Kumar, W.C. Kratz, D.E. Guro, D.L. Rarig and W.P. Schmidt, “Gas mixture fractionation to produce two high purity products by pressure swing adsorption”, Separation Science and Technology, vol. 27, no. 4, pp. 509-522, 1992.
[12] D. Diagne, M. Goto and T. Hirose, “New PSA process with intermediate feed inlet position operated with dual refluxes-application to carbon-dioxide removal and enrichment”, J. Chem. Eng. Japan, vol. 27, no. 1, pp. 85-89, 1994.
[13] B.K. Na, K.K. Koo, H. Lee and H.K. Song, “Effect of rinse and recycle methods on the pressure swing adsorption process to recover CO2 from power plant flue gas using activated carbon”, Ind. Eng. Chem. Res., vol. 41, no. 22, pp. 5498-5503, 2002.
[14] C.H. Lee, J. Yang and H. Ahn, “Effects of carbon-to-zeolite ratio on layered bed H2 PSA for coke oven gas”, AIChE J., vol. 45, no. 3, pp. 535-545, 1999.
[15] P. Xiao ,P. Webley, G. Li,J. Zhang, R. Singh, M. Marshall , “Capture of CO2 from flue gas streams with zeolite 13X by vacuum-pressure swing adsorption”, Adsorption, vol. 14, no. 4-5, pp. 575-582, 2008.
[16] J.G. Jee, M.B. Kim and C.H. Lee, “Adsorption characteristics of hydrogen mixtures in a layered bed: binary, ternary, and five-component mixtures”, Ind. Eng. Chem. Res., vol. 40, no. 3, pp. 868-878, 2001.
[17] Y. Takamura, S. Narita, J. Aoki, S. Hironaka and S. Uchida, “Evaluation of dual-bed pressure swing adsorption for CO2 recovery from boiler exhaust gas”, Separation and Purification Technology, vol. 24, no. 3, pp. 519-528, 2001.
[18] P.H. Turnock and R.H. Kadlec, “Separation of nitrogen and methane via periodic adsorption”, AIChE J., vol. 17, no. 2, pp. 335-342, 1971.
[19] L.H. Shendalman and J.E. Mitchell, “A study of heatless adsorption in the model system CO2 in He(I)”, Chem. Eng. Sci., vol. 27, no. 7, pp. 1449-1458, 1972.
[20] S. Nakao and M. Suzuki, “Mass transfer coefficient in cyclic adsorption and desorption”, J. Chem. Eng. Japan, vol. 16, no. 2, pp. 114-119, 1983.
[21] M.M. Hassan, D.M. Ruthven and N.S. Raghavan, “Air separation by pressure swing adsorption on a carbon molecular sieve”, Chem. Eng. Sci., vol. 41, no. 5, pp. 1333-1343, 1986.
[22] S.J. Doong and R.T. Yang, “Bulk separation of multicomponent gas mixtures by pressure swing adsorption: pore/surface diffusion and equilibrium models”, AIChE J., vol. 32, no. 3, pp. 397-410, 1986.
[23] S.J. Doong and R.T. Yang, “Bidisperse pore diffusion model for zeolite pressure swing adsorption”, AIChE J., vol. 33, no. 6, pp. 1045-1049, 1987.
[24] M.M. Hassan, N.S. Raghvan and D.M. Ruthven, “Pressure swing air separation on a carbon molecular sieve. II: Investigation of a modified cycle with pressure equalization and no purge”, Chem. Eng. Sci., vol. 42, no. 8, pp. 2037-2043, 1987.
[25] S. Farooq and D.M. Ruthven, “A comparison of linear driving force and pore diffusion-models for a pressure swing adsorption bulk separation process”, Chem. Eng. Sci., vol. 45, no. 1, pp. 107-115, 1990.
[26] S. Sircar, K. B. Lee, M. G. Beaver and H. S. Caram, "Reversible chemisorbents for carbon dioxide and their potential applications " ,AIChE Journal, vol. 54, pp. 8048-8062, 2008.
[27] I. E. Rodrigues, Z. Yong and V. G. Mata, "Adsorption of carbon dioxide on chemically modified high surface area carbon-based adsorbents at high temperature", Adsorption, vol. 7, pp. 41-50, 2001.
[28] Y. Ding and E. Alpay, "Equilibria and kinetics of CO2 adsorption on hydrotalcite adsorbent", Chem. Eng. Sci., vol. 55, pp. 3461-3474, 2000.
[29] Y. Ding and E. Alapy, "High temperature recovery of CO2 from flue gases", Institution of Chemical Engineers Trans IChemE, vol. 79, pp. 45-51, 2001.
[30] J. A. Ritter, A.D.Ebner and S.P.Reynold, "New pressure swing adsorption cycles for carbon dioxide sequestration", Adsorption, vol. 11, pp. 531–536 ,2005.
[31] J. A. Ritter, A.D.Ebner and S.P.Reynold, "Stripping PSA cycles for CO2 recovery from flue gas at high temperature", Ind. Eng. Chem.Res, vol. 45, pp 4278–4294 2006.
[32] J. A. Ritter, H. Du and A. D. Ebner, "Temperature dependence of the nonequ- ilibrium kinetic model that describes the adsorption and desorption behavior of CO2 in K-Promoted HTlc", Ind. Eng. Chem. Res, vol. 46, pp 3328–3336 , 2007.
[33] P. Webley, R. Singh,M. K. R. Reddy, S. Wilson, K. Joshi, J. C. D. D. Costa, , "High temperature materials for CO2 capture", Energy Procedia, vol.1 pp. 1-8, 2008.
[34] E. Rodrigues, Z. Yong, and V. Mata, "Adsorption of carbon dioxide at high temperature—a review", Separation and Purification Technology, vol. 26, pp. 195–205, 2009.
[35] S. Sircar ,K. B. Lee, M. G. Beaver, H. S. Caram , "Chemisorption of carbon dioxide on sodium oxide promoted alumina," AIChE Journal, vol. 53, pp. 2924-2832, 2007.
[36] S. Sircar, K. B. Lee, H. S. Caram, and A. Verdooren, "Chemisorption of carbon dioxide on potassium-carbonate-promoted hydrotalcite," Journal of Colloid and Interface Science vol. 308, pp. 30-39, 2007.
[37] S. Sircar, K. B. Lee, M. G. Beaver, Hugo S. Caram , "Reversible chemisorption of carbon dioxide: simultaneous production of fuel-cell grade H2 and compressed CO2 from synthesis gas", Adsorption, vol. 13, pp. 385-392, 2007.
[38] S. Sircar,K. B. Lee, M. G. Beaver, Hugo S. C., "Novel thermal-swing sorption-enhanced reaction process concept for hydrogen production by low-temperature steam-methane reforming", Ind. Eng. Chem. Res, vol. 46, pp 5003-5014, 2007.
[39] S. Sircar ,K. B. Lee, M. G. Beaver and H. S. Caram, "Performance of Na2O promoted alumina as CO2 chemisorbent in sorption-enhanced reaction process for simultaneous production of fuel-cell grade H2 and compressed CO2 from synthesis gas," Journal of Power Sources, vol. 176, pp. 312-319, 2008.
[40] S. Sircar, M. G. Beaver and H. S. Caram, "Selection of CO2 chemisorbent for fuel-cell grade H2 production by sorption-enhance water gas shift reaction," International Journal of Hydrogen Energy vol. 34, pp. 2972-2978, 2009.
[41] S. Sircar and K. B. Lee, "Removal and recovery of compressed CO2 from flue gas by a novel thermal swing chemisorption process," AIChE Journal, vol. 54, pp. 2293-2302, 2008.
[42] P. Xiao, S. Wilson, G. Xiao and R. Singh, P.Webley “Novel adsorption processes for carbon dioxide capture within an IGCC process”, Energy Procedia, vol.1, pp.631-638, 2009.
[43] C.Y. Wen and L.T. Fan, Models for flow systems and chemical reactors, Dekker, New York, 1975.
[44] R.B. Bird, W.E. Stewart and E.N. Lightfoot, Transport Phenomena, Wiley, New York, 1960.
[45] E.N. Fuller, P.D. Schettler and J.C. Giddings, “A Comparison of Methods for Predicting Gaseous Diffusion Coefficients”, J. Gas Chromatogr., vol. 3, pp. 222-227, 1965.
[46] E.N. Fuller, P.D. Schettler and J.C. Giddings, “A New Method for Prediction of Binary Gas-Phase Diffusion Coefficients”, Ind. Eng. Chem. Res., vol. 58, no. 5, pp. 18-27, 1966.
[47] W.L.McCabe, J.C. Smith and P. Harriott, Unit Operations of Chemical Engineering, Sixth Edition, McGraw-Hill, Inc., New York, 2001.
[48] C.H. Lee, J. Yang, S. Han, C. Cho,W.G. Kim and H. Lee, "Experimental and theoretical study on H2/CO2 separation by a five-step one-column PSA processes " Korean J. of Chem. Eng, vol. 12, pp. 503-511, 1995.
[49] R. T. Yang and S. J. Doong, "Gas separation by pressure swing adsorption a pore-diffusion model for bulk separation", AlChE Journal, vol. 31, pp. 1829-1842, 1985.
[50] J. Yang, C.H. Lee and J.W. Chang, “Separation of Hydrogen Mixtures by a Two-Bed Pressure Swing Adsorption Process Using Zeolite 5A”, Ind. Eng. Chem. Res., vol. 36, no. 7, pp. 2789-2798, 1997.
[51] Evaluation of Alternate Water Gas Shift Configurations for IGCC Systems The United States Department of Energy, National Energy Technology Laboratory DOE/NETL-401/080509, 2009.
[52] J.M. Smith, H.C. Van Ness and M.M. Abbott, Chemical Engineering Thermodynamics, Sixth Edition, McGraw-Hill, Inc., New York, 2001.
[53] R.H. Perry, D.W. Green and J.O. Maloney, Perry’s Chemical Engineers’ Handbook, Sixth Edition, McGraw-Hill, Inc., New York, 1984.
[54] A. E. Rodrigues, F. V. S. Lopes, C. A. Grande, A. M. Ribeiro, E. L. G. Oliveira, J. M. Loureiro "Enhancing Capacity of Activated Carbons for Hydrogen Purification" ,Ind. Eng. Chem. Res., vol. 48, pp. 3978–3990, 2009.
[55] A. E. Rodrigues,F.V.S. Lopes, C.A. Grande and A.M. Ribeiro,J.M. Loureiro,O.Evaggelos and V. Nikolakis, , "Adsorption of H2, CO2, CH4, CO, N2 and H2O in Activated Carbon and Zeolite for Hydrogen Production" ,Separation Science and Technology, vol. 44, pp. 1045–1073, 2009.
[56] R. E. Rodrigues,A. M. Ribeiro,C. A. Grande, F. V. S. Lopes and J. M. Loureiro, "Four Beds Pressure Swing Adsorption for Hydrogen Purification: Case of Humid Feed and Activated Carbon Beds", AIChE Journal, vol. 55, pp. 2292-2302, 2009.
[57] J.N.Kim, S.H.Cho, J.D.Kim and J.H. Park. , “Adsorber Dynamics and Optimal Design of Layered Beds for Multicomponent Gas Adsorption”, Chem. Eng. Sci., vol. 53, no. 23, pp. 3951-3963, 1998.
|