參考文獻 |
[1] W. Xiao, W. G. Dunford, and A. Capel, “A novel modeling method for photovoltaic cells,” in Proc. IEEE Power Electron. Spec. Conf.(PESC), vol. 3, pp. 1950-1956, June. 2004.
[2] M. G. Villalva, J. R. Gazoli, and E. R. Filho, “Comprehensive approach to modeling and simulation of photovoltaic arrays,” IEEE Trans. on Power Electronics., vol. 24, no. 5, pp. 1198-1208, May. 2009.
[3] T. Esram, and P.L. Chapman, “Comparison of photovoltaic array maximum power point tracking techniques,” IEEE Trans. Energy Convers., vol. 22, no. 2, pp. 439-449, June. 2007.
[4] R. Faranda, S. Leva, “Energy comparison of MPPT techniques for PV systems,” WSEAS Trans. on Power Systems, vol.3, no.6 , pp. 446-455, 2008.
[5] N. Femia, G. Petrone, G. Spagnuolo, and M. Vitelli, “Optimization of perturb and observe maximum power point tracking method,” IEEE Trans. on Power Electronic, vol. 20, no. 4, pp. 963-973, July. 2005.
[6] N. Femia, G. Petrone, G. Spagnuolo, and M. Vitelli, “Optimizing sampling rate of P&O MPPT technique,” IEEE Power Electron. Spec. Conf (PESC). vol. 3 , pp. 1945-1949, June. 2004.
[7] G. J. Yu, Y. S. Jung, J. Y. Choi, I. Choy, J. H. Song and G. S. Kim, “A novel two-mode MPPT control algorithm based on comparative study of existing algorithms,” in Proc. IEEE Photovol. Spec.Conf., no. 19-24, pp. 1531-1534. , May. 2002.
[8] K. H. Hussein and I. Mota, “Maximum photovoltaic power tracking: An algorithm for rapidly changing atmospheric condition,” Proc. Inst. ElectrEng. Gener., Transmiss. Distrib., vol. 142, no. 1, pp. 59-64, Jan. 1995.
[9] G. W. Hart, H. M. Branz, and C. H. Cox, “Experimental tests of open loop miximum power point tracking techniques,” Solar Cells, pp. 185, 1984.
[10] K. Kobayashi, H. Matsuo, and Y. Sekine, “A novel optimum operating point tracker of the solar cell power supply system,” IEEE Power Electron. Spec. Conf.(PESC), vol. 3. pp. 2147-2151, June. 2004.
[11] B. Bekker and H. J. Beukes, “Finding an optimal PV panel maximum power point tracking method,” 7th AFRICON Conf. Africa, , vol. 2, pp. 1125-1129, Sept. 2004.
[12] T. Noguchi, S. Togashi, and R. Nakamoto, “Short-current pulse based adaptive maximum-power-point tracking for photovoltaic power generation systems,” in Proc. IEEE Int. Symp. Ind. Electron., vol.1,pp.157-162, Dec. 2000.
[13] N. Mutoh, T. Matuo, K. Okada, and M. Sakai, “Prediction data based maximum power point tracking method for photovoltaic power generation systems,” IEEE Power Electron. Spec. Conf.(PESC),vol. 3., pp. 1489-1494, Nov. 2002.
[14] S.Yuvarajan and S. Xu, “Photovoltaic power converter with a simple maximum power point tracker,” Proc. Int. Symp. Circuits Syst., pp. III-399-III-402, 2003.
[1
5] M. Park and I. K. Yu, “A study on optimal voltage for MPPT obtained by surface temperature of solar cell,” in Proc. 30th Annu. Conf. IEEE Ind. Electron. Soc., pp. 2040-2045, Nov. 2004.
[16] F. Coelho, M. Concer, C. Martins, “A MPPT approach based on temperature measurements applied in PV systems,” IEEE International Conference on Industry Applications.(IAS), pp. 1-6, Nov. 2010.
[17] Y. K. Lo, J. M. Wang and K. J. Pai, "Improved commutation method for a full-bridge current-source inverter,” IEEE Trans. Ind. Electron., vol. 55, no. 2, pp. 961-963, Feb. 2008.
[18] N. Mohan, T. M. Undeland, and W. P. Robbins, Power Electronics-Converters, Applications, and Design, 3rd edition , John Wiley & Sons, 2003.
[19] S. B. Kjaer, K. K. Pedersen, and F. Blaabjerg, “A review of single-phase grid-connected inverters for photovoltaic modules,” IEEE Trans. Ind. Appl., vol. 41(5), pp. 1292-1306, Sep./Oct. 2005
[20] T. Shimizu, K. Wada, and N. Nakamura, “A flyback-type single phase utility interactive inverter with low-frequency ripple current reduction on the DC input for an AC photovoltaic module system,” IEEE Power Electron. Spec. Conf.(PESC), vol. 3, pp. 1483-1488, Jun. 2002.
[21] S. B. Kjaer and F. Blaabjerg, “Design optimization of a single phase inverter for photovoltaic applications,” IEEE Power Electron. Spec. Conf.(PESC), vol. 3,pp. 1183-1190, Jun. 2003.
[22] S. Khajehodin, A. Bakhshai, P. Jain, and J. Drobnik, “A robust power decoupler and maximum power point tracker topology for a grid-connected photovoltaic system,” IEEE Power Electron. Spec. Conf.(PESC), pp. 66-69, June. 2008.
[23] S. B. Kjaer, “Design and control of an inverter for photovoltaic applications,” Ph.D. dissertation, Inst. Energy Technol., Aaborg University, Aaborg East, Denmark, 2002.
[24] J. Espinoza, G. Joos, and P. Ziogas, “Current source converter on-line pattern generator with switching frequency minimization,” IEEE Trans. Ind. Electron., vol. 44(2),pp. 198-206, Apr. 1997.
[25] G. Ledwich, “Current source inverter modulation,” IEEE Trans. on Power Electronic., vol. 6(4),pp. 618-623, Oct. 1991.
[26] D. N. Zmood and D. G. Holmes, “A generalized approach to the modulation of current source inverters,” IEEE Power Electron. Spec. Conf.(PESC), vol. 1, pp. 739-745, May. 1998.
[27] S. Wei and A. Maswood, “A novel current source PWM drive topology with specific harmonic elimination switching patterns,” IEEE Power Eng. Rev.,vol. 20(12), pp.53-55, Dec. 2000.
[28] J. Sun, S. Beineke, and H. Grotstollen, “Optimal PWM based on real-time solution of harmonic elimination equations,” IEEE Trans. on Power Electronics, vol. 11, no. 4, pp. 612-621, July. 1996.
[29] K. Hirachi and Y. Tomokuni, “Improved control strategy to eliminate the harmonic current components for single-phase PWM current source inverter,” in Proc. Int. Telecommun. Energy Conf., pp. 189-194, Oct. 1997,
[30] R. T. H. Li , H. S. Chung and T. K. M. Chan, ”An active modulation technique for single-phase grid-connected CSI,” IEEE Trans. on Power Electronics., vol. 22, no. 4, pp. 1373-1382, Jul. 2007.
|