參考文獻 |
[1] L. Carrete, K. A. Friedrich, U. Stimming, “Fuel cells-Fundamentals and Applications, Fuel Cells,” Vol. 1, pp. 5-39, 2001.
[2] S. M. H. Hashmi, “Cooling Strategies for PEM FC Stacks,” Helmut-Schmidt-Universitat, Ph. D. Dissertation, 2010.
[3] Y. J. Shon, G. G. Park, T. H. Yang, Y. G. Yoon, W. Y. Lee, S. D. Yim, C. S. Kim, “Operating characteristics of an air-cooling PEMFC for portable applications,” Journal of Power Sources, Vol. 145, pp. 604-609, 2005.
[4] E. Hontanon, M. J. Escudero, C. Bautista, P.L. Garcia-Ybarra, L, Daza, “Optimisation of flow-field in polymer electrolyte membrane fuell cells using computational fluid dynamics techniques,” Journal of Power Sources, Vol. 86, pp.363-368, 2000.
[5] K. Scott, P. Argyropoulos, P. Yiannopoulos, W. M. Taama, “Electrochmical and gas evolution characteristics of direct methanol fuel cells with stainless steel mesh flow beds,” Jounal of Power Sources, Vol. 31, pp. 823-832, 2001.
[6] A. Kumar, R. G. Reddy, “Modeling of polymer electrolyte membrane fuel cell with metal foam in the flow-field of the bipolar/end plates,” Journal of Power Sources, Vol. 114, pp54-62, 2003.
[7] A. Kumar, R. G. Reddy, “Materials and design development for bipolar/end plates in fuel cell,” Journal of Power Sources, Vol. 129, pp62-67, 2004.
[8] K. Boomsma, D. Poulikakos, F. Zwick, “Metal foams as compact high performance hat exchangers,”Mechanics of Materials, Vol. 35, pp. 1161-1176, 2003.
[9] S. Arisetty, A. K. Prasad, G. Advani, “Metal foams as flow field and gas diffusion layer in direct methanol fuel cells,” Journal of Power Sources, Vol. 165, pp45-57, 2007.
[10] 蔡秉蒼,曾重仁,「金屬發泡材質子交換膜燃料電池之性能分析」,第三屆全國氫能與燃料電池學術研討會,FC043,國立台南大學,2008。
[11] 陳孟怡,「金屬發泡材質子交換膜燃料電池之研究」,碩士論文,國立中央大學機械工程學系,2009。
[12] 汪雙鳳,李炅,張偉保,「開孔泡沫金屬屬用於緊湊型熱交換器的研究進展」,化工進展,Vol.27,No.5,pp.675-678,2008。
[13] S. Mancin, C. Zilio, A. Cavallini, L. Rossetto, “Heat transfer during air flow in aluminum foams,” Heat and Mass Transfer, Vol. 53, pp.4976-4984, 2010.
[14] S. K. Park, S. Y. Choe, “Dynamic modeling and analysis of a 20-cell PEM fuel cell stack considering temperature and two-phase effects,” Journal of Power Sources, Vol. 179, pp.660-672, 2008.
[15] Y. H. Park, J. A. Caton, “Development of a PEM stack and performance analysis including the effects of water content in the membrane and cooling method,” Journal of Power Sources, Vol. 179, pp.584-591, 2008.
[16] J. H. Jang, H. C. Chiu, W. M. Yan, “Effect of operating conditions on the performances of individual cell and stack of PEM fuel cell,” Journal of Power Sources, Vol. 180, pp.476-483, 2008.
[17] S. H. Yu, S. Sohn, J. H. Nam, C. J. Kim, “Numerical study to examine the performance of multi-pass Serpentine flow-fields for cooling plates in polymer electrolyte membrane fuel cells,” Journal of Power Sources, Vol. 194, pp.697-703, 2009.
[18] J. G. Pharoah, O. S. Burheim, “On the temperature distribution in polymer electrolyte fuel cell,” Journal of Power Sources, Vol. 195, pp. 5235-5245, 2010.
[19] V. A. Paganin, E. A. Ticianelli, E. R. Gonzalez, “Development of small polymer electrolyte fuel cell stacks,” Journal of Power Sources, Vol. 70, pp.55-58, 2001.
[20] J. Wu, S. Galli, I. Lagana, A. Pozio, G. Monteleone, X. Z. Yuan, J. Martin, H.Wang, “An air-cooled proton exchange membrane fuel cell with combined oxidant and coolant flow,” Journal of Power Sources, Vol. 188, pp.199-204, 2009.
[21] L. Yahia, A. Bruno, C. Cathy, P. Hassan, “A chaotic heat-exchanger for PEMFC cooling applications,” Journal of Power Sources, Vol. 156, pp.114-118, 2006.
[22] C. Y. Wen, G. W. Huang, “Application of thermally conductive pyrolytic graphite sheet to thermal management of a PEM fuel cell,” Journal of Power Sources, Vol. 178, pp.132-140, 2007.
[23] Standard Test Method for Thermal Transmission Properties of Thermally Conductive Electrical Insulation Meterials, ASTM International D5470-06, 2006.
[24] R. A. Writz, F. Huang, M. Greiner,“Correlation of Fully Developed Heat Transfer and Pressure Drop in a Symmetrically Grooved Channel,” Journal of Heat Transfer, Vol.121, pp.236-239, 1999.
[25] G. Leonardo, G. Gianpiero, T. Enrico, “Heat Transfer Characterization of Metallic Foams,” ACS Applied Materials and Interfaces, Vol. 44, pp.9078-9085, 2005
[26] G. Indranil, “Heat transfer correlation for high-porosity open-cell foam,” Journal of Heat Transfer, Vol. 52, pp.1488-1494, 2009
[27] A. A. Zakauskas, “Convective Heat Transfer in Cross-Flow,”Handbook of Single-Phase Heat Transfer, Wiley, N. Y., 1987.
[28] V. V. Calmidi, R. L. Mahajan, “Forced Convection in High Porosity Metal Foams,” Journal of Heat Transfer, Vol. 122, pp.557-566, 2000.
[29] P. T. Garrity, J. F. Klausner, R. Mei, “Performance of Aluminum and Carbon Foams for Air Side Heat Transfer Augmentation,” Journal of Heat Transfer, Vol. 132, pp.121901-1-121901-9, 2011
[30] B. C. Kou, “Automatic control systems,”Seventh Edtion, Prentice-Hall, Englewood Cliffs, Englewood Cliffs, New Jersey, 1995.
|