考慮佈局效應的類比設計自動化工具

以作者查詢圖書館館藏

、以作者查詢臺灣博碩士

、以作者查詢全國書目

、勘誤回報

、線上人數：133

、訪客IP：3.145.111.115

姓名

廖于晴(Yu-ching Liao) 查詢紙本館藏

畢業系所

電機工程學系

論文名稱

考慮佈局效應的類比設計自動化工具
(A Layout-Aware Analog Synthesis Environment on Laker)

相關論文

★ 運算放大器之自動化設計流程及行為模型研究	★ 高速序列傳輸之量測技術
★ 使用低增益寬頻率調整範圍壓控震盪器之1.25-GHz八相位鎖相迴路	★ 類神經網路應用於高階功率模型之研究
★ 使用SystemC語言建立IEEE 802.3 MAC 行為模組之研究	★ 以回填法建立鎖相迴路之行為模型的研究
★ 高速傳輸連結網路的分析和模擬	★ 一個以取樣方式提供可程式化邏輯陣列功能除錯所需之完全觀察度的方法
★ 抑制同步切換雜訊之高速傳輸器	★ 以行為模型建立鎖相迴路之非理想現象的研究
★ 遞迴式類神經網路應用於序向電路之高階功率模型的研究	★ 用於命題驗証方式的除錯協助技術之研究
★ Verilog-A語言的涵蓋率量測之研究	★ 利用類神經模型來估計電源線的電流波形之研究
★ 5.2GHz CMOS射頻接收器前端電路設計	★ 適用於OC-192收發機之頻率合成器和時脈與資料回復電路

檔案

[Endnote RIS 格式]

[Bibtex 格式]

[相關文章]

[文章引用]

[完整記錄]

[館藏目錄]

[檢視]

[下載]

本電子論文使用權限為同意立即開放。
已達開放權限電子全文僅授權使用者為學術研究之目的，進行個人非營利性質之檢索、閱讀、列印。
請遵守中華民國著作權法之相關規定，切勿任意重製、散佈、改作、轉貼、播送，以免觸法。

摘要(中)

隨著製程的演進，電路佈局(Layout)所產生的寄生效應對於電路效能的影響也越來越顯著，然而在傳統類比電路自動化設計工具中，元件尺寸調整與電路佈局大多分成兩個獨立的流程，因為寄生效應對於電路效能的影響並未考慮進去，導致耗費了相當多的時間重複調整設計。本篇論文提出一套考量寄生效應的類比積體電路自動化設計工具，可經由操作客製化的圖形介面，設計出符合需求規格的電路設計與電路佈局。為了讓尺寸調整與電路佈局達到最佳的連結，本論文在考量寄生效應的尺寸調整流程中，使用佈局樣板預估出寄生電阻電容值，並結合電壓驅動設計方法，避免佈局後的電路效能不符合訂定之規格。整套類比自動化工具在LINUX上實現，在線性規劃(linear programming)的部分用CPLEX來找尋最佳解，而在自動產生電路佈局上則是以C/C++及Tcl/Tk 程式語言實現，自動化佈局的過程能在Laker環境下執行。從實驗數據的觀察可知，本論文所提出的工具可以在非常短的時間內設計出符合使用者所給定規格之電路與最佳的擺放佈局，並在佈局後電路效能皆有達到訂定規格的標準，且不需預留設計的邊界。

摘要(英)

In modern technology, layout effects have more and more impacts on circuit performance. However, most of the existing analog automation tools consider the circuit sizing and layout generation in two separate steps, which often result in time-consuming sizing-layout iterations. In this thesis, a layout-aware analog synthesis tool is presented to generate the required designs from specifications to layout through a user-friendly GUI. In order to provide a strong link between sizing and layout steps, a parasitic-aware circuit sizing flow is proposed based on a flexible layout template to prevent the performance from failing to meet the specifications after layout. The proposed sizing algorithm has been implemented with the optimization tool CPLEX, incorporating with an automatic layout generation tool implemented with C/C++ and Tcl/Tk on Laker. As demonstrated in the experimental results, this analog synthesis tool is able to generate the required circuits in seconds with high quality layouts and effectively guarantees the post-layout performance with less over-design.

關鍵字(中)

★ 類比寄生效應
★ 類比自動化工具

關鍵字(英)

論文目次

摘要 i
Abstract ii
Contents iii
List of Figures v
List of Tables ix
Chapter 1 Introduction 1
1.1 Motivation 1
1.2 Related Works 3
1.2.1 Parasitic-Aware Performance Analysis 3
1.2.2 Analog Layout Generation Tool 5
1.3 Organization 7
Chapter 2 Background 8
2.1 Bias-driven Circuit Sizing Approach 8
2.1.1 Bias-driven performance equations 9
2.1.2 Building models and transistor sizing 11
2.1.3 Bias-driven optimization flow 15
2.2 Layout Generation with Laker 19
2.2.1 Laker and Tcl/Tk 19
2.2.2 MOS Generator 20
2.2.3 Resistor and Capacitor 21
2.2.4 Guard Ring 25
2.2.5 Layout Template 26
Chapter 3 Layout-Aware Sizing Flow 28
3.1 Parasitic in the Layout Template 29
3.2 Layout-Aware Performance Analysis 32
Chapter 4 Graphical User Interface 38
Chapter 5 Experimental Results 45
Chapter 6 Conclusion and Future Works 57
References 58

參考文獻

[1] R. A. Rutenbar, G. G. E. Gielen, and J. Roychowdhury, “Hierarchical Modeling, Optimization, and Synthesis for System-Level Analog and RF Designs,” in Proc. of the IEEE, pp. 640-669, 2007.
[2] F. El-Turky and E.E. Perry, “BLADES: An Artificial Intelligence Approach to Analog Circuit Design”, IEEE Trans. on Computer-Aided Design, pp. 680-692, 1989.
[3] J. Mahattanakul and J. Chutichatuporn, “Design Procedure for Two-Stage CMOS Op-Amp with Flexible Noise-Power Balancing Scheme”, IEEE Trans. on Circuits and Systems-I: Regular Papers, pp. 1508-1514, 2005.
[4] R. Phelps, M. Krasnicki, R. A. Rutenbar, L.R. Carley and J.R. Hellums, “Anaconda: Simulation-Based Synthesis of Analog Circuits via Stochastic Pattern Search”, IEEE Trans. on Computer-Aided Design, pp. 703-717, 2000.
[5] C.-W. Lin, P.-D. Sue, Y.-T. Shyu and S.-J. Chang, “A Bias-Driven Approach for Automated Design of Operational Amplifiers”, in Proc. Int’l Symp. on VLSI Design, Automation, and Test, pp. 119-121, 2009.
[6] M. del M. Hershenson, S. P. Boyd, and T. H. Lee, “Optimal Design of a CMOS Op-Amp via Geometric Programming”, IEEE Trans. on Computer-Aided Design, pp. 1-21, 2001.
[7] W. Gao and R. Hornsey, “A Power Optimization Method for CMOS Op-Amps Using Sub-Space Based Geometric Programming”, in Proc. DATE, pp. 508-513, 2010.
[8] M. Ranjan, W. Verhaegen, A. Agarwal, H. Sampath, R. Vemuri, G. Gielen, “Fast, Layout-Inclusive Analog Circuit Synthesis using Pre-Compiled Parasitic-Aware Symbolic Performance Models”, in Proc. DATE, pp. 604-609, 2004.
[9] G. Zhang, A. Dengi, R. A. Rohrer, R. A. Rutenbar, L. R. Carley, “A Synthesis Flow Toward Fast Parasitic Closure For Radio-Frequency Integrated Circuits,” in Proc. DAC, pp. 155–158, 2004.
[10] R. Castro-López, O. Guerra, E. Roca, and F. V. Fernández, “An Integrated Layout-Synthesis Approach for Analog ICs”, IEEE Trans. on Computer-Aided Design, pp. 1179-1189, 2008.
[11] H. Habal and H. Graeb, “Constraint-Based Layout-Driven Sizing of Analog Circuits”, IEEE Trans. on Computer-Aided Design, pp. 1089-1102, 2011.
[12] K. Lampaert, D. Garrod, R. Rutenbar, and L. Carley, “Koan/Anagram II: New Tools for Device-Level Analog Placement and Routing,” IEEE J. Solid-State Circuits, pp. 330-342, 1991.
[13] L. Zhang, U. Kleine and Y. Jiang, “An automated design tool for analog layouts”, IEEE Trans. on VLSI System, pp. 881-894, 2006.
[14] E. Yilmaz, Günhan Dündar “Analog Layout Generator for CMOS Circuits”, IEEE Trans. on Computer-Aided Design, pp. 32-45, 2009.
[15] A. Agarwal and R. Vemuri, “Layout-Aware RF Circuit Synthesis Driven by Worst Case Parasitic Corners”, IEEE International Conference on Computer Design: VLSI in Computers and Processors (ICCD), 2005
[16] M. Webb and H. Tang, “Analog Design Retargeting by Design Knowledge Reuse and Circuit Synthesis,” in Proc. International Symposium on Circuits and Systems, pp. 892–895, 2008.
[17] L. Zhang, N. Jangkrajarng, S. Bhattacharya, and C.-J. Richard Shi, “Parasitic-Aware Optimization and Retargeting of Analog Layouts: A Symbolic-Template Approach”, IEEE Trans. on Computer-Aided Design, pp. 791- 802, 2008.
[18] Z. Li and L. Zhang, “A Performance-Constrained Template-Based Layout Retargeting Algorithm for Analog Integrated Circuits” Asia and South Pacific , Design Automation Conference (ASP-DAC), 2010
[19] P.-H. Lin, “Hierarchical Analog Circuit Placement,” PhD dissertation, Taiwan University, Electrical Engineering, 2009
[20] K. Lampaert, G. Gielen, and W. Sansen, “Analog Layout Generation for Performance and Manufacturability, “ Boston, MA: Kluwer, 1999.
[21] T. Sen, “Yet another simulation based sensitivity analysis tool for analog layout generation,” M.S. thesis, Bogaziçi Ünivertisesi, Istanbul, Turkey, 2007.
[22] Y.-C. Liao, Y.-L. Chen, X.-T. Cai, C.-N. Jimmy Liu, and T.-C. Chen, “LASER: layout-aware analog synthesis environment on laker”, in Proc. ACM international conference on Great lakes symposium on VLSI, pp. 107-112, 2013.
[23] Y.-F. Cheng, L.-Y. Chan, Y.-L. Chen, Y.-C. Liao, and C.-N. Jimmy Liu, “A Bias-Driven Approach to Improve the Efficiency of Automatic Design Optimization for CMOS OP-Amps”, in Proc. Asia Symposium on Quality Electronic Design, pp. 59-63, 2012.
[24] W. Gao and R. Hornsey, “A Power Optimization Method for CMOS Op-Amps Using Sub-Space Based Geometric Programming”, in Proc. Design, Automation and Test in Europe, pp. 508-513, 2010.
[25] P. Mandal, V. Visvanathan, “CMOS Op-Amp Sizing Using a Geometric Programming Formulation”, IEEE Trans. On Computer-Aided Design, pp. 22-38, 2001.
[26] ILOG CPLEXTM from IBM, http://www.ilog.com/products/cplex/
[27] LakerTM from Synopsys, http://www. synopsys.com
[28] C.-L. Hsu, “A Template-Based Layout Automation Tool for PLL Circuits,” M.S. thesis, Central University, Taiwan, 2011.
[29] Y.-C. Ding, “Template-Based Parasitic-Aware Synthesis Approach for Analog Circuits,” M.S. thesis, Central University, Taiwan, 2012.
[30] R.A Rutenbar., “Emerging Tools for Analog & Mixed-Signal: The Role of Synthesis and Analog Intellectual Property” in DATE master course, 2003
[31] Y.-F. Cheng, “A Bias-Driven OP-Amp Sizing Approach with Improved Prediction of Frequency Response and Channel Length Effects,” M.S. thesis, Central University, Taiwan, 2012.

指導教授

劉建男(Chien-nan Liu)

審核日期

2013-8-5

推文