參考文獻 |
[1] Heinzl, J., Hertz, C. H., 1985, “Ink-jet Printing”, Advances Electronics and Electron Physics, Vol. 65, pp. 91.
[2] Kamphoefner, F. J., 1972, “Ink-jet Printing”, IEEE Transactions on Electron Devices, Vol. ED-19, No. 4, pp. 584.
[3] Kuhn, L., Myers, A., 1979, “Ink-jet Printing”, Scientific American, Vol. 240, No. 4, pp. 162-178.
[4] Le, H. P., 1998, “Progress and Trends in Ink-jet Printing Technology”, Journal of Imaging Science and Technology, Vol. 42, No. 1, pp. 49-62.
[5] Brünahl, J., 2003, “Physics of Piezoelectric Shear Mode Inkjet Actuators”, Doctoral Dissertation, Department of Condensed Matter Physics, Royal Institute of Technology, Stockholm, Sweden.
[6] Yeh, J.T., 2000, “Simulation and Industrial Applications of Inkjet”, The 7th National Computational Fluid Dynamics Conference.
[7] Kyser, E. L., Sears, S. B., 1976, “Method and Apparatus for Recording with Writing Fluids and Drop Projection Means Therefore”, U.S. Patent No. 3946398.
[8] Wood, R. W., Loomis, A. L., 1927, “The Physical and Biological Effects of High-frequency Sound-waves of Great Intensity”, Philosophical Magazine, Ser. 7, Vol. 4, No. 22, pp. 417-436.
[9] Wu, T. H., 2009, “Design and Fabrication of Ultrasonic Focusing Printing Device with ZnO Thin Film”, master thesis in English, Department of mechanical engineering, National Central University, Chungli, Taiwan.
[10] Huang, D., Kim, E. S., 2001, “Micromachined Acoustic-Wave Liquid Ejector”, Journal of Microelectromechanical Systems, Vol. 10, No. 3, pp. 442-449.
[11] Hadimioglu, B., Elrod, S., Sprague, R., 2001, “Acoustic Ink Printing: an Application of Ultrasonics for Photographic Quality Printing at High Speed”, IEEE Ultrasonics Symposium, pp. 627-635.
[12] Chuang, T. C., Lim, M., Hadimioglu, B., Thompson, M. J., 1995, “Acoustic Fabrication of Color Filters”, Europen Patent, No. 0683405A1.
[13] Beasley, J. D., 1977, “Model for Fluid Ejection and Refill in an Impulse Drive Jet”, Photogr. Sci. Eng., Vol. 21, pp. 78-82.
[14] Lovelady, K. T., Toye, L. F., 1981, “Liquid Drop Emitter”, US patent, No. 4308547.
[15] Chu, B. T., Apfel, R. E., 1982, “Acoustic Radiation Pressure Produced by a Beam of Sound”, Journal of the Acoustical Society of America, Vol. 72, No.6, pp. 1673-1687.
[16] Elrod, S. A., Hadimioglu, B., Khuri-Yakub, B. T., Rawson, E. G., Richley, E., Quate, C. F., 1989, “Nozzleless Droplet Formation with Focused Acoustic Beams”, Journal of Applied Physics, Vol. 65, No. 9, pp. 3441-3447.
[17] Sleva, M. Z., Hint, W. D., 1990, “Design and construction of a PVDF Fresnel lens”, Proceedings of 1990 IEEE Ultrasonics Symposium, Vol. 2, pp. 821-826.
[18] Hadimioglu, B., Elrod, S. A., Steinmetz, D. L., Lim, M., Zesch, J. C., Khuri-Yakub, B. T., Rawson, E. G., and Quate, C. F., 1992, “Acoustic Ink Printing”, Proceedings of 1992 IEEE Ultrasonics Symposium, pp. 929-935.
[19] Hadimioglu, B., Rawson, E. G., Lujan, R., Lim, M., Zesch, J. C., Khuri-Yakub, B. T., and Quate, C. F., 1993, “High-Efficiency Fresnel Acoustic Lenses”, Proceedings of 1993 IEEE Ultrasonics Symposium, pp. 578-582.
[20] Hadimioglu, B., Elrod, S., and Sprague, R., 2001, “Acoustic Ink Printing: An Application of Ultrasonics for Photographic Quality Printing at High Speed”, Proceedings of 2001 IEEE Ultrasonics Symposium, pp. 627-633.
[21] Kameyama, S., Fukumoto, H., Kimura, T., Wadaka, S., 1999, “Ink Mist Jet Generation Using Low Frequency Focused Ultrasonic Waves and Nozzle”, Proceedings of IEEE Ultrasonics Symposium, pp. 695-698.
[22] Fukumoto, H., Aizawa, J., Nakagawa, H., Narumiya, H., 2000, “Printing with Ink Mist Ejected by Ultrasonic Waves”, Journal of Imaging Science and Technology, Vol. 44, No. 5, pp. 398-405.
[23] Aizawa, J., Fukumoto, H., Takeda, M., 2004, “Droplet Ejector and Liquid Supply Tube”, U.S. Patent, No. 6692106B2.
[24] Kwon, J. W., Yu, H., Zou, Q., Kim, E. S., 2006, “Directional droplet ejection by nozzleless acoustic ejectors built on ZnO and PZT”, Journal of Micromechanics and Microengineering, Vol. 16, No. 12, pp. 2697-2704.
[25] Rosenbaum, J. F., 1988, Bulk Acoustic Wave Theory and Devices, Artech House Inc, London, England.
[26] Tay, K. W., 2005, “The Analysis and Design of Film Bulk Acoustic-Wave Resonators”, Doctoral Dissertation, Ph.D. thesis in English, Department of Electrical Engineering, National Cheng Kung University, Tainan, Taiwan.
[27] Defranould, Ph., 1981, “High Deposition Rate Sputtered ZnO Thin Films for BAW and SAW Applications”, Proceedings of 1981 IEEE Ultrasonics Symposium, pp.483-488.
[28] Golebiowski, J., 1999, “Fabrication of piezoelectric thin film of zinc oxide in composite membrane of ultrasonic microsensors”, Journal of Materials Science, Vol. 34, No. 19, pp. 4661-4664.
[29] Martin, P. M., Good, M. S., Johnston, L. W., Posakony, G. L., Bond, L. J., and Crawford, S. L., 2000, “Piezoelectric Films for 100-MHz Ultrasonic Transducers”, Journal of Thin Solid Films, Vol. 379, Issue 1-2, pp. 253-258.
[30] Yoshino, Y., Ushimi, Y., Yamada, H., Takeuchi, M., 2003, “Zinc Oxide Piezoelectric Thin films for Bulk Acoustic Wave Resonators”, Murata Manufacturing Co., Ltd., Tenjin, Nagaoka-kyo, Kyoto, Japan.
[31] Hsu, Y. H., Lin, J., Tang, W. C., 2007, “RF sputtered piezoelectric zinc oxide thin film for transducer applications”, Journal of Materials Science: Materials in Electronics, Vol. 19, No. 7, pp. 653-661.
[32] Lin, R. C., Kao, K. S., Chen, Y. C., 2007, “Two-step sputtered ZnO piezoelectric films for film bulk acoustic resonators”, Applied Physics A, 89, pp. 475-479.
[33] Hsieh, P. T., 2007, “Study on the Luminescence Characteristics of ZnO Thin Film”, Ph.D. thesis in English , National Sun Yat-sen University, Kaohsiung, Taiwan.
[34] Vossen, J. L., 1977, “Transparent Conducting Films”, Physics of Thin Films, pp. 1-64.
[35] Richerby, D. S., Matthews, A., 1991, Advanced Surface Coatings : A Handbook of Surface Engineering, pp. 92-100, Chapman and Hill, New Work.
[36] Menz, W., Mohr, J., Paul, O., 2001, Microsystem Technology, Wiley-VCH, New York.
[37] Yeh, C. C., 2001, “The Fabrication of the Transparent Conductive Films (TiN) on Plastic Substrates”, master thesis in English, Department of Electrical Engineering, National Cheng Kung University, Tainan, Taiwan.
[38] Ra, Y., Bradley, S. G., Chen, C. H., 1994, “Etching of aluminum alloys in the transformer‐coupled plasma etcher”, Lam Research Corporation, Fremont, California 94538.
[39] Xiao, H., 2001, Introduction to Semiconductor Manufacturing Technology, Prentice Hall, New Jersey.
[40] Jeon1, Y. A., No1, K. S., Kim, J. S., Yoon, Y. S., 2002, “Characteristics of ZnO Thin Film Deposited on Various Metal Bottom Electrodes”, METALS AND MATERIALS International, Vol. 9, No. 4, pp. 383-387.
|