參考文獻 |
[1] J. Larminie and A. Dicks, Fuel Cell Systems Explained, 2nd Edition, John Wiley & Sons, 2003.
[2] J. H. Choi, et al. “Methanol electro-oxidation and direct methanol fuel cell using Pt/Rh and Pt/Ru/Rh alloy catalysts,” Journal of Electrochemical Acta, Vol. 50, pp. 787-790, 2004.
[3] R. V. Niquirilo, “Formic Acid Oxidation at Pd, Pt and PbOx-based Catalysts and Calculation of their Approximate Electrochemical Active Areas,” International Journal of Electrochemical Science, Vol. 5, pp. 344-354, 2010.
[4] J. B. Xu, “Effect of surface composition of Pt-Au alloy cathode catalyst on the performance of direct methanol fuel cells,” International Journal of Hydrogen Energy, Vol. 35, pp. 8699-8706, 2010.
[5] V. A. Paganin, E. A. Ticianelli, and E. R. Gonzalez, “Development of small polymer electrolyte fuel cell stacks,” Journal of Power Source, Vol. 70, pp. 55-58, 1998.
[6] D. M. Bernardi and M. W. Verbrugge, “Mathematical model of a gas diffusion electrode bonded to a polymer electrolyt,” Journal of AICHE, Vol. 37, pp. 1151-1163, 1991.
[7] S. Um, C. Y. Wang, and K. S. Chen, “Computational fluid dynamics modeling of polymer electrolyte membrane fuel cells,” Journal of Electrochemical Society, Vol. 147, pp. 4485-4493, 2000.
[8] D. M. Bernardi and M. W. Verbrugge, “A mathematical model of the solid-polymer-electrolyte fuel cell,” Journal of Electrochemical Society, Vol. 139, pp. 2477-2491, 1992.
[9] T. A. Zawodzinski, T. E. Springer and S. Gottesfeld, “Polymer Electrolyte Fuel Cell Model,” Journal of Electrochemical Society, Vol. 138, pp. 2334-2342, 1991.
[10] T. V. Nguyen and R. E. White, “A water and heat management model for proton‐exchange‐membrane fuel cells,” Journal of Electrochemical Society, Vol. 140, pp. 2178-2186, 1993.
[11] V. Gurau, H. Liu and S. Kakac, “Two-dimensional model for proton exchange membrane fuel cells,” Journal of Electrochemical Society, Vol. 139, pp. 2477-2491, 1992.
[12] J. S. Yi and T. V. Nguyen, “An along‐the‐channel model for proton exchange membrane fuel cells,” Journal of Electrochemical Society, Vol. 145, pp. 1149-1159, 1998.
[13] J. S. Yi and T. V. Nguyen, “Multicomponent transport in porous electrodes of proton exchange membrane fuel cells using the interdigitated gas distributors,” Journal of Electrochemical Society, Vol. 146, pp. 38-45, 1999.
[14] S. Dutta1, S. Shimpalee1 and J. W Van Zee, “Three-dimensional numerical simulation of straight channel PEM fuel cells,” Journal of Applied Electrochemistry, Vol. 30, pp. 135-146, 2000.
[15] S. Mazumder and J. V. Cole, “Rigorous 3-D Mathematical Modeling of PEM Fuel Cells,” Journal of Electrochemical Society, Vol. 147, pp. 1510-1517, 2003.
[16] G. Hu, J. Fan, S. Chen, Y. Liu and K. Cen, “Three-dimensional numerical analysis of proton exchange membrane fuel cells (PEMFCs) with conventional and interdigitated flow fields,” Journal of Power sources, Vol. 136, pp. 1-9, 2004.
[17] P. Costamagna and S. Srinivasan, “Quantum jumps in the PEMFC science and technology from the 1960s to the year 2000:Part I. Fundamental scientific aspects,” Journal of Power sources, Vol. 102, pp. 242-252, 2001.
[18] P. Costamagna and S. Srinivasan, “Quantum jumps in the PEMFC science and technology from the 1960s to the year 2000:Part II. Engineering, technology development and application aspects,” Journal of Power sources, Vol. 102, pp. 253-269, 2001.
[19] S. Shimpalee, S. Greenway and J. W. Van Zee, “The impact of channel path length on PEMFC flow-field design,” Journal of Power Sources, Vol. 160, pp. 398-406, 2006.
[20] K. Tuber, A Oedegraard, M. Hermann and C. Hebling, “Investigation of fractal flow-field in portable proton exchange membrane and direct methanol fuel cell,” Journal of Power Sources, Vol. 131, pp. 175-181, 2004.
[21] S. C. Andrade, A. H. Guerrero and M. R. von Spakovsky, “Current density and polarization curves for radial flow field patterns applied to PEMFCs,” Journal of Energy, Vol. 35, pp. 1-8, 2009.
[22] K. Scott, P. Argyropoulos, P. Yiannopoulos and W. M. Taama, “Electrochemical and gas evolution characteristics of direct methanol fuel cells with stainless steel mesh flow beds,” Journal of Applied Electrochemical Society, Vol. 31, pp. 823-832, 2001.
[23] A. Kumar and R.G. Reddy, “Modeling of polymer electrolyte membrane fuel cell with metal foam in the flow-field of the bipolar/end plates,” Journal of Power Sources, Vol. 114, pp. 54-62, 2003.
[24] A. Kumar and R. G. Reddy, “Materials and design development for bipolar/end plates in fuel cells,” Journal of Power Sources, Vol. 129, pp. 62-67, 2004.
[25] R. Jiang, C. Rong and D. Chu, “Determination of energy efficiency for a direct methanol fuel cell stack by a fuel circulation method,” Journal of Power Sources, Vol. 126, pp. 119-124, 2004.
[26] S. Arisetty, A. K. Prasad and S. G. Advani, “Metal foams as flow field and gas diffusion layer in direct methanol fuel cells,” Journal of Power Sources, Vol. 165, pp. 49-57, 2007.
[27] 蔡秉蒼,曾重仁,「金屬發泡材質子交換膜燃料電池之性能分析」,第三屆全國氫能與燃料電池學術研討會,FC043,國立台南大學,2008。
[28] 陳孟怡,「金屬發泡材質子交換膜燃料電之研究」,碩士論文,國立中央大學機械工程學系,2009。
[29] J. Chen, “Experimental study on the two phase flownext term behavior in PEM fuel cell parallel channels with porous media inserts,” Journal of Power Sources, Vol. 195, pp. 1122-1129, 2010.
[30] J. Kim and N. Cunninghham, “Development of porous carbon foam polymer electrolyte membrane fuel cell,” Journal of Power Sources, Vol. 195, pp. 2291-2300, 2010.
[31] S. Dutta1, S. Shimpalee1 and J. W. Van Zee, “Numerical prediction of mass-exchange between cathode and anode channels in a PEM fuel cell,” International Journal of Heat and Mass Transfer, Vol. 44, pp. 2029-2042, 2001.
[32] T. Berning, D. M. Lu and N. Djilali, “Three-dimensional computational analysis of transport phenomena in a PEM fuel cell,” Journal of Power sources, Vol. 106, pp. 284-294, 2002.
[33] S. Mazumder and J. V. Cole, “Rigorous 3-D Mathematical Modeling of PEM Fuel Cells,” Journal of Electrochemical Society, Vol. 147, pp. 1510-1517, 2003.
[34] A. Kumar and R. G. Reddy, “Effect of channel dimensions and shape in the flow-field distributor on the performance of polymer electrolyte membrane fuel cells,” Journal of Power sources, Vol. 113, pp. 11-18, 2003.
[35] S. Shimpalee, S. Greenway, D. Spuckler and J. W. Van Zee, “Predicting water and current distributions in a commercial-size PEMFC,” Journal of Power sources, Vol. 135, pp. 79-87, 2004.
[36] U. Pasaogullari and C. Y. Wang “Computational Fluid Dynamics Modeling of Proton Exchange Membrane Fuel Cells using Fluent,” Electrochemical Engine Center, University Park, 16802.
[37] X. Peng and Y. Boming, “Developping a new form of permeability and Kozeny-Carman constant for homogeneous porous media by means of fractal geometry,” Advances in Water Resources, Vol. 31,pp. 74-81, 2008.
[38] C. Y. Wang S Um, and K. S. Chen,“ Computational Fluid Dynamics Modeling of Proton Exchange Membrane Fuel Cells,” Journal of Electrochemical Society, Vol. 147, pp. 4485-4493, 2000.
[39] J. V. Cole and S. Mazumder, “Rigorous 3-D Mathematical Modeling of PEM Fuel Cells,” Journal of Electrochemical Society, Vol. 150, pp. A1503-A1509, 2003.
[40] J. Divisek, A. A. Kulikovsky and A. A. Kornyshev, “Modeling the Cathode Compartment of Polymer Electrolyte Fuel Cells-Dead and Active Reaction Zones,” Journal of Electrochemical Society, Vol. 146, pp. 3981-3991, 1999.
[41] F. Moukalled and M. Darwish, “A comparative assessment of the performance of mass conservation-based algorithms for incompressible multiphasw flows,” Numerical Heat Transfer Part B, Vol 42, pp. 259-283, 2002.
[42] S. V. Patankar, “Numerical Heat Transfer and Fluid Flows,” Hemisphere, Washington, 1980.
[43] W. Yuan, Y. Tang, M. Pan, Z. Li and B. Tamg, “Determination of the optimal active area for proton exchange membrane fuel cells with parallel, interdigitated or serpentine designs,” Renewable Energy, Vol. 35, pp. 656-666, 2010.
|