協同產品開發之流程管理 - 以汽車零件為例

以作者查詢圖書館館藏

、以作者查詢臺灣博碩士

、以作者查詢全國書目

、勘誤回報

、線上人數：122

、訪客IP：3.128.95.219

姓名

陳宜禎(Yi-chen Chen) 查詢紙本館藏

畢業系所

工業管理研究所在職專班

論文名稱

協同產品開發之流程管理 - 以汽車零件為例
(The process management of collaborative product development –a case of automobile electronic products)

相關論文

★ 應用MFM 與PPM 監控協同設計之執行流程	★ 應用DSM與DRFT於汽車電子之協同開發流程
★ 一協同設計專案團隊組成方法- 以安全監視器產品為例	★ 應用認知工程開發全球化光纖通訊系統
★ 羽絨產業策略規劃-應用品質機能展開分析法	★ 重電業協同專案管理績效之研究-以變電所統包工程為例
★ 以屬性導向新產品開發之流程塑模與分析– 以醫療器材產業為案例	★ 以品質機能展開法應用於主管管理職能之建構
★ 應用參考模型以及流程建模改善供應鏈績效-以投影機產業為例	★ 配電系統之高壓電纜接頭供應商評選
★ 應用品質機能展開於產品開發之流程分析-以刀鋒式伺服器為例	★ 實施精實六標準差改進製程良率－以機頂盒表面黏著技術為例
★ 太陽能模組產業之決策營運研究	★ 新產品開發階段導入替代料之流程建模及潛在風險分析
★ 應用實驗設計研發PET複合膜及改善厚膜翹曲問題	★ 應用先期產品品質規劃系統開發新產品-以工業電腦為例

檔案

[Endnote RIS 格式]

[Bibtex 格式]

[相關文章]

[文章引用]

[完整記錄]

[館藏目錄]

至系統瀏覽論文 ( 永不開放)

摘要(中)

在競爭激烈的環境中，新產品開發時程縮短，需用最短時間將新產品推出，才能在市場中佔有領先的地位，無法預期的意外事件經常在新產品開發的過程中出現，使得新產品開發研發資源與專案時程往往超出預期，所以縮短新產品開發所需的時間為企業最主要的課題。
運用DCOR及APQP模式在新產品開發NPD過程中做連結，使開發環節皆能緊密配合，期望在每階段流程能有合適的規劃，能有效提升企業的技術核心價值與無形資產能力。透過協同產品開發之流程管理，使用APQP、FMEA、PPAP、MSA、SPC及CP (Control plan)，達到新產品開發流程之標準化。
運用本研究方法在汽車產業，透過APQP的運用使新產品開發流程並落實執行，以跨功能小組方式來完成產品實現，提高開發設計與製程能力，縮短產品上市時間。

摘要(英)

In competition environment, the pioneer, who has the leading position, often has the shortest time in the new product development process. However, there are some unexpected accident events happened during the new product development, which makes the schedule not been kept as we wish.
Using DCOR and APQP, it enables to link all of the processes during the new product development. It makes each stage have suitable planning and to promote the key value of technology and intangible assets ability of enterprises effectively. Through the process management of new product development, we use APQP, FMEA, PPAP, MSA, SPC and CP (Control plan) to standardize procedure.
This study applied APQP in automobile industry by using cross-function to promote the ability to shorten the time for producing new products.

關鍵字(中)

★ APQP
★ NPD
★ DCOR

關鍵字(英)

★ DCOR
★ New Product Development
★ Advanced Product Quality Planning

論文目次

中文摘要 i
Abstract ii
誌謝 iii
Table of Contents iv
List of Figures vi
LIST of Tables vii
Chapter 1 Introduction 1
1.1 Research Background and Motivation 1
1.2 Research Objectives 1
1.3 The Scope and Constrains 2
1.4 Structure of Thesis 2
Chapter 2 Literature Review 4
2.1 New Product Development Process 4
2.2 Design Chain Operations Reference Model (DCOR) 7
2.2.1 Introduction to DCOR 7
2.2.2 Design of DCOR level 10
2.3 Advanced Product Quality Planning (APQP) 11
2.3.1 Define APQP 11
Chapter 3 Overview of New product develop process and Proposed Methodology 17
3.1 Create Project Team 18
3.2 Develop APQP (Advanced Product Quality Planning) 19
3.2.1 Develop APQP (Advanced Product Quality Planning) 20
3.2.2 The Procedure of Product Implementation 21
3.2.3 APQP’s Five Phase Process: 22
3.3 Management the process based NPD 27
Chapter 4 Case Study and Implementation Processes Analysis 29
4.1 Case Description 29
4.2 Implementation step 30
4.2.1 The Structure of Project Team 30
4.2.2 Planning Stage Process 32
4.2.3 Design and Output Stage Process 33
4.2.4 Prototype Stage Process (Design and Develop Validation) 34
4.2.5 Launch Stage Process (Throughput of the Design and Development) 35
4.3. Advanced Product Quality Planning (APQP) 35
4.3.1 APQP Stage Output 35
4.3.2 Potential Failure Mode and Effects (FMEA) 36
4.3.3 Measurement System Analysis (MSA) 42
4.3.4 Statistical Process Control (SPC) 45
4.3.5 Production Part Approval Process (PPAP) 48
4.3.6 Control Plan (CP) 55
Chapter 5 Conclusions and the Future Works 57
Reference 58

參考文獻

[1]AIAG (2008), AIAG Manual, 810-358-3003, http://elsmar.com/APQP/.
[2]Anderson, D. O. (1998), “Product Realization Process (PRP),” Louisiana TechUniversity, Article , http://web.archive.org/web/20030404093913/ www2.latech.edu/~dalea/instruction/prp.html.
[3]Automotive Industry Action Group, (2003), “ISO/TS 16949:2002 Implementation Guide,” 1st ed.
[4]Bosch Group (2005), “Bosch Supplier Development Handbuch,” Version 1.0. 28.
[5]Brewer, J. C. (2002), “Better Launches Begin at Estimating,” in Automotive Industries, Vol. 182, pp. 34-36.
[6]Carbone, T. A. and Tippett, D. D. (2004), “The Front End of Product Development in The Electronics Industry:A Research Proposal,” presented at Proceedings of the American Society for Engineering Management.
[7]Chrysler D. and Ford, G. M. (1995), “Advanced Product Quality Planning & Control Plan,” 1st ed, AIAG.
[8]Chrysler D. and Ford, G. M. (2001), “Potential Failure Mode and Effects Analysis,” 3rd ed, AIAG.
[9]Chrysler D. and Ford, G. M. (2003), “Measurement System Analysis,” 3rd ed, AIAG.
[10]Chrysler D. and Ford, G. M. (2005), “Statistical Process Control,” 2nd ed, AIAG.
[11]Chrysler, D. and Ford, G. M. (2006), “Production Part Approval Process,” 4th ed, AIAG.
[12]Cooper, R. G. (1994), “Perspective: Third-generation New Product Processes,” Journal of Product Innovation Management, Vol. 11, pp. 3-14.
[13]Crows, K. (2007), “New Product Development Solutions, DRM Associates,” www.npd-solutions.com/pdmetrics.html.
[14]Elgh, F. (2004), “A Generic Framework for Automated Cost Evaluation of Product Variants and Fabrication Plants,” Proceedings of ASME Design Engineering Technical Conferences and Computers and Information in Engineering Conference (DETC2004), American Society of Mechanical Engineering, New York.
[15]Elgh, F., and Cederfeldt, M. (2006), “Reducibility Awareness as a Base for Design Automation Development – Analysis and Synthesis Approach to Cost Estimation,” 13th ISPE International Conference on Concurrent Engineering: Research and Applications (CE2006), Antibes.
[16]Elgh, F. (2007), “Computer-supported Design for Productivity: Principles and Models for System Realization and Utilization,” Chalmers University of Technology, Gothenburg, Ph.D. Thesis.
[17]Harlou, U. (2005), “Developing Product Families Base on Architectures – Contribution to a Theory of Product Families,” Technical University of Denmark, Lyngby, Ph.D. Thesis.
[18]Handfield, B. R. et al. (1999), “Involving Suppliers in New Product Development,” California Management Review, Vol. 42, No. 4, pp.59-82.
[19]Hewlett-Packard Development Company (2004), “L.P. HP Product Lifecycle Management (PLM) Strategy,” White paper.
[20]Jayaram, J. and Narasimhan R. (2007), “The Influence of New Product Development Competitive Capabilities on Project Performance,” IEEE Transactions on Engineering Management, Vol. 54, No. 2, pp. 241, 243.
[21]Juran, J. M. (1992), “Juran on Quality by Design: The New Steps for Planning Quality into Goods and Services,” New York, THE FREE PRESS, pp. 200-205.
[22]Lynn, G. S., Reilly, R. R. and Akgun, A. E. (2000), “Knowledge Management in New Product Teams: Practices and Outcomes,” IEEE Transactions on Engineering Management, Vol. 47, pp. 221 - 231.
[23]Mitchell, E. (2001), “Web-based APQP Keeps Everyone Connected,” in Quality, Vol. 40, pp. 40-45.
[24]Peng, C. L. (2007), “Applying MFM and PFMEA for the Supervisory Control of Collaborative Design Process,” National Central University, Master Thesis.
[25]Piszczalski, M. (2002), “Cooking Up A Better Approach to Development & Quality,” in Automotive Design & Production, Vol. 114, pp. 16-18.
[26]Sanongpong, K. (2009), “Automotive Process-based New Product Development: A Review of Key Performance Metrics,” Proceedings of the World Congress on Engineering 2009 Vol I WCE 2009, London, U.K, July 1 - 3.
[27]Sommerville, J., and Dalziel, A. (1998), “Project Teambuilding: The Applicability of Belbin’s Team-Role Self-Perception Inventory,” International Journal Management, Vol. 16, No. 3, pp. 165-171.
[28]Sunnersjo, S., Cederfeldt, M., Elgh, F. and Rask, I. (2006), “A Transparent Design System for Iterative Product Development,” Journal of Computing and Information Science in Engineering 6, 300–307, 2006.
[29]Supply-Chain Council (2006), “Design-chain Operations Reference-model,” http://www.supply-chain.org.
[30]Supply-Chain Council (2006), Design-Chain Special Interest Group, “Design-Chain Operations Reference-model (DCOR) 1.0.”
[31]Wang, L.H., Shen, W.M., Xie, H., Neelamkavil, J. and Pardasani, A (2002), “Collaborative Conceptual Design – State of The Art and Future Trends,” Computer-Aided Design, Vol. 34, No.13, pp. 981-966.
[32]Wang, H. W. (2006), “Establishing an ISO/TS 16949 Based New Product Development Procedure for Automotive TFT-LCD Panel Makers,” National Chiao Tung University, Master Thesis.
[33]江玳君(2007), “A Design Methodology for The Collaborative Product Development Platform,” National Central University, Master Thesis.

指導教授

高信培(Hsing-Pei Kao)

審核日期

2010-6-22

推文