參考文獻 |
1. H. Kurafuji and K. Suda, “Electrical discharge drilling of glass,” Annals
of the CIRP,Vol.16, pp.415-419, 1968.
2. H. H. Kellog, “The interface observation of poles in water electrolysis,”
Journal of Electrochemical Society, Vol. 97, pp. 133-137, 1950.
3. H. Langen, V. Fascio, R. Wüthrich and D. Viquerat, “Three-dimensional
microstructuring of Pyrex glass wafers by spark-assisted chemical
etching”, Microrobotics and Microassembly, Vol. 4568, pp.304-309,
2001.
4. M. Kubota and Y. Tamura, “ECDM drills a steel plate with high feed
rate,” Bulletin of the Japan Society of Precision Engineering, Vol. 7,
pp.114-118, 1983.
5. A. B. Khayry and J. A. McGeough, “Analysis of electrochemical arc
machining by stochastic and experimental methods,” Proceedings of
Royal Society, London, pp.403-429, 1987.
6. V. Reghuram ,Experimental observations of the ECD phenomena,
Dissertation Thesis, Indian Institute of Technology, Kanpur, India,
1994.
7. I. Basak and A. Ghosh, “Mechanism of material removal in
electrochemical dischargemachining: a theoretical model and
experimental verification,” Journal of Material Processing Technology,Vol. 71 pp. 350-359, 1997.
8. I. Basak, Electrochemical discharge machining mechanism and a scheme
for enhancing material removal capacity, Dissertation Thesis, Indian
Institute of Technology, Kanpur, India, 1991.
9. V.K. Jain, P.M. Dixit and P.M. Pandey, “On the analysis of the
electro-chemical spark machining process- test of machining on
composite materials,” International Journal of Machine Tools and
Manufacture,” Vol. 39, pp.165-186, 1999.
10. B. Bhattacharyya, B.N. Doloi and S.K. Sorkhel, “Experimental
investigations into electrochemical discharge machining (ECDM) of
non-conductive ceramic materials,” Journal of Materials Processing
Technology, Vol. 95, pp. 145-154, 1999.
11. A. Kulkarni, R. Sharan and G.K. Lal, “An experimental study of
discharge mechanism in electrochemical discharge machining,”
International Journal of Machine Tools and Manufacture, Vol. 42, pp.
1121-1127, 2002.
12. V. Fascio, H. H. Langen, H. Bieuler and Ch. Comninellis,
“Investigations of the spark assisted chemical engraving,”
Electrochemistry Communications, Vol. 5, pp. 203-207, 2003.
13. V. Fascio, H. H. Langen, H. Bleuler and C. Comninellis, “Spark assisted
chemical engraving: a novel technology for glass microstructuring,”54th Annual Meeting of the International Society of Electrochemistry,
São Pedro, Brazil, pp. 203-207, 2003.
14. R. Wuthrich, V. Fascio and H. Bleuler, “A stochastic model for electrode
effects,” Electrochimica Acta , Vol. 49, pp. 4005-4010, 2004.
15. R. Wüthrich and V. Fascio and “Machining of non-conducting materials
using electrochemical discharge phenomenon ― an overview,”
International Journal of Machine Tools & Manufacture, Vol. 45, pp.
1095-1118, 2005.
16. V. Fascio, R. Wüthrich and H. Bleuler, “Spark assisted chemical
engraving in the light of electrochemistry” Electrochimica Acta, Vol. 49,
pp. 3997-4003, 2004.
17. R. Wüthrich, Ch. Comninellis and H. Bleuler, “Bubble evolution on
vertical electrodes under extreme current densities,” Electrochimica Acta,
Vol. 50, pp. 5242-5246, 2005.
18. R. Wüthrich and L.A. Hof, “The gas film in spark assisted chemical
engraving(SACE) ― A key element for micro-machining applications,”
International Journal of Machine Tools & Manufacture, Vol. 46, pp.
828-835, 2006.
19. R. Wüthrich, U. Spaelter and H. Bleuler, “The current signal in
spark-assisted chemical engraving(SACE): what does it tell us,” Journal
of Micromechanics and Microengineering, Vol. 16, pp. 779-785, 2006.
20. V.K. Jain, Y.P. Singh, P. Kumar and D.C. Agrawal, “Machining
piezoelectric (PZT)ceramics using an electrochemical spark
machining(ECSM) process,” Journal of Materials Processing
Technology, Vol. 58, pp. 24-31, 1996.
21. V. Fascio, R. Wüthrich, D. Viquerat and H. Langen, “3D
microstructuring of glass using electrochemical discharge machining
(ECDM) ,” Micromechatronics and Human Science, pp.179-183, 1999.
22. C.T. Yang, S.S. Ho and B.H. Yan, “Micro hole machining of
borosilicate glass through electrochemical discharge machining
(ECDM),” Key Engineering Materials, Vol. 196, pp. 149-166, 2001.
23. H.J. Lim, Y.M. Lim, S.H. Kim and Y.k. Kwak, “Self-aligned micro tool
and electrochemical discharge machining (ECDM) for ceramic
materials”, Optical Engineering for Sensing and Nanotechnology, Vol.
4416, pp. 348-353, 2001.
24. D.J. Kim, Y. Ahn, S.H. Lee and Y.K. Kim, “Voltage pulse frequency
and duty ratio effects in an electrochemical discharge microdrilling
process of Pyrex glass,” International Journal of Machine Tools &
Manufacture, Vol. 46, pp. 1064-1067, 2006.
25. R. Wüthrich, B. Despont, P. Maillard and H. Bleuler, “Improving the
material removal rate in spark-assisted chemical engraving (SACE)
gravity-feed micro-hole drilling by tool vibration,” Journal ofMicromechanics and Microengineering, Vol. 16, N 28-N31, 2006.
26. Z.P. Zheng, H.C. Su, F.Y. Huang and B.H. Yan, “The tool geometrical
shape and pulse-off time of pulse voltage effects in a Pyrex glass
electrochemical discharge microdrilling process,” Journal of
Micromechanics and Microengineering, Vol. 17, pp. 265-272, 2007.
27. M. S. Han, B. K. Min and S. J. Lee, “Modeling gas film formation in
electrochemical discharge machining processes using a side-insulated
electrode ”, Journal of Micromechanics and Microengineering, Vol. 18,
045019, 2008.
28. M. S. Han, B. K. Min and S. J. Lee, “Geometric improvement of
electrochemical discharge micro-drilling using an ultrasonic-vibrated
electrolyte ”, Journal of Micromechanics and Microengineering, Vol. 19,
065004, 2009.
29.朱樹敏編著,電化學加工技術,化學工業出版社(2006)。
30. J.F. Thorpe and R.D. Zerkle, “Theoretical analysis of the equilibrium
sinking of shallow, axially symmetric, cavities by electrochemical
machining, ” Electrochemical Society Princeton, pp.1-39,1971.
31. 胡啟章編著,電化學原理與方法,五南圖書 (2002).
32. Madhavv S. Phadke 著, 黎中正 譯著, 穩健設計之品質工程, 台
北圖書(1993).
33. 永田靖 著, 陳耀茂 譯, 實驗計畫法入門, 財團法人中衛發展中心(2004).
34 . S. H. Choi, S.H. Ryu and C.N. Chu, “Fabrication of WC micro-shaft
by using electrochemical etching, ” International Journal of Advanced
Manufacture Technology, Vol. 31, pp. 682-687 ,2007.
35.田福助編著,電化學基本原理與應用,五洲出版社 (2004).
|