參考文獻 |
[1] A. Manz, N. Graber, and H. M. Widmer, "Miniaturized Total Chemical-Analysis Systems - a Novel Concept for Chemical Sensing," Sensors and Actuators B-Chemical, vol. 1, pp. 244-248, 1990.
[2] J. D. L. Shapley and D. A. Barrow, "Novel patterning method for the electrochemical production of etched silicon," Thin Solid Films, vol. 388, pp. 134-137, 2001.
[3] M. Campas and I. Katakis, "DNA biochip arraying, detection and amplification strategies," Trac-Trends in Analytical Chemistry, vol. 23, pp. 49-62, 2004.
[4] K. C. Young, H. M. Lien, C. C. Lin, T. T. Chang, G. B. Lee, and S. H. Chen, "Microchip and capillary electrophoresis for quantitative analysis of hepatitis C virus based on RT-competitive PCR," Talanta, vol. 56, pp. 323-330, 2002.
[5] B. P. M. S. M. J. S. Y. Y. S. H. K. J. H. L. S. Yang, "Continuous cell cross over and lysis in a microfluidic device," Microfluid Nanofluid, 2009.
[6] D. Graham, "Biochips to Bavarian cows," vol. Vol.19, pp. pp.199~200, 2001.
[7] E. Szili, H. Thissen, J. P. Hayes, and N. Voelcker, "A biochip platform for cell transfection assays," Biosensors & Bioelectronics, vol. 19, pp. 1395-1400, 2004.
[8] K. Y. Lien, W. Y. Lin, Y. F. Lee, C. H. Wang, H. Y. Lei, and G. B. Lee, "Microfluidic systems integrated with a sample pretreatment device for fast nucleic-acid amplification," Journal of Microelectromechanical Systems, vol. 17, pp. 288-301, 2008.
[9] P. Bley, "The Liga Process for Fabrication of 3-Dimensional Microscale Structures," Interdisciplinary Science Reviews, vol. 18, pp. 267-272, 1993.
[10] T. Hanemann, R. Ruprecht, and J. H. Hausselt, "Photomolding in microsystem technology.," Abstracts of Papers of the American Chemical Society, vol. 216, pp. U95-U95, 1998.
[11] M. A. Jesus M. Ruano-Lopez, Garbi~ne Olabarria, Dolores Verdoy,b Dang D. Bang, Minqiang Bu,d Anders Wolff, Anja Voigt, Jan A. Dziuban, Rafa1 Walczak and Javier Berganzo, "The SmartBioPhone , a point of care vision under development through two European projects: OPTOLABCARD and LABONFOIL," pp. 1495–1499, 2009.
[12] H. Becker and C. Gartner, "Polymer microfabrication technologies for microfluidic systems," Analytical and Bioanalytical Chemistry, vol. 390, pp. 89-111, 2008.
[13] M. Worgull, J. F. Hetu, K. K. Kabanemi, and M. Heckele, "Hot embossing of microstructures: characterization of friction during demolding," Microsystem Technologies-Micro-and Nanosystems-Information Storage and Processing Systems, vol. 14, pp. 767-773, 2008.
[14] T. R. Hsu, "Packaging design of microsystems and meso-scale devices," Ieee Transactions on Advanced Packaging, vol. 23, pp. 596-601, 2000.
[15] C. Liu, "Recent developments in polymer MEMS," Advanced Materials, vol. 19, pp. 3783-3790, 2007.
[16] P. P. Shiu, M. Ostojic, G. K. Knopf, and S. Nikumb, "Rapid fabrication of polymethylmethacrylate micromold masters using a hot intrusion process," Journal of Micro-Nanolithography Mems and Moems, vol. 7, pp. -, 2008.
[17] S. W. Youn, H. Goto, M. Takahashi, S. Oyama, Y. Oshinomi, K. Matsutani, and R. Maeda, "A replication process of metallic micro-mold by using parylene embossing and electroplating," Microelectronic Engineering, vol. 85, pp. 161-167, 2008.
[18] M. J. Madou, Fundamentals of Micro fabrication. New York, 2002.
[19] J. S. Liu, C. Liu, J. H. Guo, and L. D. Wang, "Electrostatic bonding of a silicon master to a glass wafer for plastic microchannel fabrication," Journal of Materials Processing Technology, vol. 178, pp. 278-282, 2006.
[20] M. T. Koesdjojo, Y. H. Tennico, and V. T. Reincho, "Fabrication of a microfluidic system for capillary electrophoresis using a two-stage embossing technique and solvent welding on poly(methyl methacrylate) with water as a sacrificial layer," Analytical Chemistry, vol. 80, pp. 2311-2318, 2008.
[21] J. Steigert, S. Haeberle, T. Brenner, C. Muller, C. P. Steinert, P. Koltay, N. Gottschlich, H. Reinecke, J. Ruhe, R. Zengerle, and J. Ducree, "Rapid prototyping of microfluidic chips in COC," Journal of Micromechanics and Microengineering, vol. 17, pp. 333-341, 2007.
[22] L. Yi, X. D. Wang, and Y. Fan, "Microfluidic chip made of COP (cyclo-olefin polymer) and comparion to PMMA (polymethylmethacrylate) microfluidic chip," Journal of Materials Processing Technology, vol. 208, pp. 63-69, 2008.
[23] J. M. Li, C. Liu, X. D. Dai, H. H. Chen, Y. Liang, H. L. Sun, H. Tian, and X. P. Ding, "PMMA microfluidic devices with three-dimensional features for blood cell filtration," Journal of Micromechanics and Microengineering, vol. 18, pp. -, 2008.
[24] M. Sahli, C. Millot, C. Roques-Carmes, and C. K. Malek, "Experimental analysis and numerical modelling of the forming process of polypropylene replicas of micro-cavities using hot embossing," Microsystem Technologies-Micro-and Nanosystems-Information Storage and Processing Systems, vol. 15, pp. 827-835, 2009.
[25] J. M. Li, C. Liu, H. C. Qiao, L. Y. Zhu, G. Chen, and X. D. Dai, "Hot embossing/bonding of a poly(ethylene terephthalate) (PET) microfluidic chip," Journal of Micromechanics and Microengineering, vol. 18, pp. -, 2008.
[26] M. Heckele and W. K. Schomburg, "Review on micro molding of thermoplastic polymers," Journal of Micromechanics and Microengineering, vol. 14, pp. R1-R14, 2004.
[27] D. G. Yao, P. Nagarajan, L. Li, and A. Y. Yi, "A two-station embossing process for rapid fabrication of surface microstructures on thermoplastic polymers," Polymer Engineering and Science, vol. 47, pp. 530-539, 2007.
[28] S. Fatikow, Rembold, U, Microsystem technology and micro- robotics. New York: Springer, 1997.
[29] M. T. Gale, "Replication techniques for diffractive optical elements," vol. 34 pp. 321-339 1997.
[30] T. Velten, H. Schuck, M. Richter, G. Klink, K. Bock, C. K. Malek, S. Roth, H. Scho, and P. J. Bolt, "Microfluidics on foil: state of the art and new developments," Proceedings of the Institution of Mechanical Engineers Part B-Journal of Engineering Manufacture, vol. 222, pp. 107-116, 2008.
[31] O. Nezuka, D. G. Yao, and B. H. Kim, "Replication of microstructures by roll-to-roll UV-curing embossing," Polymer-Plastics Technology and Engineering, vol. 47, pp. 865-873, 2008.
[32] J. Han, S. Choi, J. Lim, B. S. Lee, and S. Kang, "Fabrication of transparent conductive tracks and patterns on flexible substrate using a continuous UV roll imprint lithography," Journal of Physics D-Applied Physics, vol. 42, pp. -, 2009.
[33] S. H. Ng and Z. F. Wang, "Hot roller embossing for microfluidics: process and challenges," Microsystem Technologies-Micro-and Nanosystems-Information Storage and Processing Systems, vol. 15, pp. 1149-1156, 2009.
[34] L. P. Yeo, S. H. Ng, Z. F. Wang, H. M. Xia, Z. P. Wang, V. S. Thang, Z. W. Zhong, and N. F. de Rooij, "Investigation of hot roller embossing for microfluidic devices," Journal of Micromechanics and Microengineering, vol. 20, pp. -, 2010.
[35] A. C. S. H. D. Rowland, P .R. Schunk , W. P. King,H. D. Rowland, A. C. Sum, P .R. Schunk , W. P. King,, "Impact of polymer film thickness and cavity size on polymer flow during embossing: toward process design rules for nanoimprint lithography," Micromech. Microeng, vol. Vol. 15, pp. pp2414-2425, 2005.
[36] L. J. Heyderman, Schift, H., David, C., Gobrecht, J., and Schweizer, T., "Flow behaviour of thin polymer films used for hot embossing lithography," Microelectronic Engineering, vol. 54, pp. 229-245, 2000.
[37] N. S. H. Yeo L P, Wang Z F, Wang Z P and de Rooij N F.De rooij, "Micro-fabrication of Polymeric Devices Using Hot Roller Embossing," Microelectronic Engineering, vol. vol. 86(4-6),, pp. pp. 933-936, 2009.
[38] W. Kurnia and M. Yoshino, "Nano/micro structure fabrication of metal surfaces using the combination of nano plastic forming, coating and roller imprinting processes," Journal of Micromechanics and Microengineering, vol. 19, pp. -, 2009.
[39] H. D. R. a. W. P. King, "Polymer deformation and filling modes during microembossing," MICROMECHANICS AND MICROENGINEERING, vol. Vol.14, pp. pp. 1625-1632, 2004.
[40] S. M. Seo, T. I. Kim, and H. H. Lee, "Simple fabrication of nanostructure by continuous rigiflex imprinting," Microelectronic Engineering, vol. 84, pp. 567-572, 2007.
[41] Z. H. F. Daniel Olivero, "Lab on a Chip," USA 2008.
[42] H. Lorenz, M. Despont, N. Fahrni, N. LaBianca, P. Renaud, and P. Vettiger, "SU-8: a low-cost negative resist for MEMS," Journal of Micromechanics and Microengineering, vol. 7, pp. 121-124, 1997.
[43] 楊奇勳, "利用SU-8 光阻二次塗佈製作2.5D 微結構之製程研究," in 機械所, vol. 碩士. 台灣: 交通大學, 中華民國九十年七月.
[44] C.-W. T. Æ. D. L. DeVoe, "Bonding of thermoplastic polymer microfluidics," Microfluidics and Nanofluidics, vol. 6, 2009.
[45] TOPAS®COC, "TOPAS/8007." http://www.topas.com/tds_8007f_400_e_2006.pdf
[46] G. PC, "PC film/sheet." http://www.zencatec.com/products02/Glastic_PC.html
[47] V. Solution, "Flexible PVC ".http://www.tmi-pvc.com/vinyl_solutions/flexible_pvc_film/general_purpose.html
[48] S. R. Oh, "Thick single-layer positive photoresist mold and poly(dimethylsiloxane) (PDMS) dry etching for the fabrication of a glass-PDMS-glass microfluidic device," Journal of Micromechanics and Microengineering, vol. 18, pp. -, 2008.
[49] MicroChem, "SU-8 3000 Permanent Epoxy Negative Photoresist."
[50] N. Y. Lee and Y. S. Kim, "A simple imprint method for multi-tiered polymer nanopatterning on large flexible substrates employing a flexible mold and hemispherical PDMS elastomer," Macromolecular Rapid Communications, vol. 28, pp. 1995-2000, 2007.
[51] Memstec, "Flexiforce." www.memstec.com.tw
[52] D. T. C. Noo Li Jeon, Christopher J. Wargo, Hongkai Wu, Insung S. Choi, Janelle R. Anderson and George M. Whitesides, "Microfluidics Section: Design and Fabrication of Integrated Passive Valves and Pumps for Flexible Polymer 3-Dimensional Microfluidic Systems" Biomedical Microdevices, vol. Volume 4 2002.
[53] H. Z. L. X. D. Ye, Y. C. Ding, H. S. Li, and B. H. Lu, "Research on the cast molding process for high quality PDMS molds," Microelectronic Engineering, vol. vol. 86, pp. pp. 310-313, Mar 2009.
[54] C. D. Wu, J. F. Lin, and T. H. Fang, "Molecular Dynamics Simulations of the Roller Nanoimprint Process: Adhesion and Other Mechanical Characteristics," Nanoscale Research Letters, vol. 4, pp. 913-920, 2009.
[55] C. W. Tsao and D. L. DeVoe, "Bonding of thermoplastic polymer microfluidics," Microfluidics and Nanofluidics, vol. 6, pp. 1-16, 2009.
[56] C. J. Campbell and B. A. Grzybowski, "Microfluidic mixers: from microfabricated to self-assembling devices," Philosophical Transactions of the Royal Society a-Mathematical Physical and Engineering Sciences, vol. 362, pp. 1069-1086, 2004.
[57] R. H. Liu, M. A. Stremler, K. V. Sharp, M. G. Olsen, J. G. Santiago, R. J. Adrian, H. Aref, and D. J. Beebe, "Passive mixing in a three-dimensional serpentine microchannel," Journal of Microelectromechanical Systems, vol. 9, pp. 190-197, 2000.
[58] M. T. Koesdjojo, C. R. Koch, and V. T. Remcho, "Technique for Microfabrication of Polymeric-Based Microchips from an SU-8 Master with Temperature-Assisted Vaporized Organic Solvent Bonding," Analytical Chemistry, vol. 81, pp. 1652-1659, 2009.
|