參考文獻 |
Aibara, T., 1968, “Natural Convective Heat Transfer in Vertical Parallel Fins of Rectangular Profiles,” The Japan Society of Mechanical Engineers (JSME), Vol. 34. Quoted in Yeh, L. T., Chu, R. C., 2002, Thermal Management of Microelectronic Equipment, ASME Press, New York.
Bar-Cohen, A., and Rohsenow, W. M., 1984, “Thermally Optimum Spacing of Vertical, Natural Convection Cooled, Parallel Plates,” Journal of Heat Transfer, Vol. 106, pp. 116-123.
Bejan, A., 2003, “Optimal Internal Structure of Volumes Cooled by Single Phase Forced and Natural Convection,” ASME Journal of Electronic Packaging, Vol. 125, pp. 200-207.
Cebeci, T., and Bradshaw, P., 1987, Convective heat Transfer, Mir Press, Moscow. Quoted in Martynenko, and Khramtsov, [2005]
Chen, T. S., Tien, H. C., and Armaly, B. F., 1986, “Naturnal Convection on Horizontal , Inclined, and Vertical Plate with Variable Surface Temperature or Heat Flux,” International Journal of Heat and Mass Transfer, Vol. 29, pp. 1465-1478.
Churchill, S, W., and Ozoe, H., 1973, “A Correlation for Laminar Free Convection From a Vertical Plate,” Journal of Heat Transfer, Vol. 95, pp. 540-541. Quoted in Aydin, O., and Guessous, L., 2001, “Fundamental Correlations for Laminar and Turbulent Free Convection From a Uniformly Heated Vertical Plate,” International Journal of Heat and Mass Transfer, Vol. 44, pp. 4605-4611.
Churchill, S. W., and Chu, H. H. S., 1975, “Correlating Equations for Laminar and Turbulent Free Convection From a Vertical Plate,” International Journal of Heat and Mass Transfer, Vol. 18, pp. 1323-1329.
Elenbaas, W., 1942, “Heat Dissipation of Parallel Plates by Free Convection,” Physica, Vol. 9, No. 1, pp. 1-28. Quoted in Incropera, F. P., and DeWitt, D. P., 2002, Fundamentals of Heat Mass Transfer, 4th ed., John Wiley & Sons, New York.
Franke, M. E., and Houge, L. E., 1991, “Electrostatic Cooling of a Horizontal Cylinder,” Journal of Heat Transfer, Vol. 113, pp. 544-548.
Gebhart, B., Jaluria, Y., Mahajan, R. L., and Sammakia, B., 1988, Buoyancy-In-
duced Flows and Transport, Hemisphere Publishing, Washington, DC.
Huang, R. T., Sheu, W. J., and Wang C. C., 2009, “Heat Transfer Enhancement by Needle-Arrayed Electrodes - An EHD Integrated Cooling System,” Energy Conversion and Management, Vol. 50, pp. 1789-1796.
Kalman, H., and Sher, E., 2001, “Enhancement of Heat Transfer by Means of a Corona Wind Created by a Wire Electrode and Confined Wings Assembly,” Applied Thermal Engineering,”, Vol. 21, pp. 265-282.
Kasayapanand, N., 2006, “Numerical Modeling of the Effect of Number of Electrodes on Natural Convection in An EHD Fluid,” Journal of Electrostatics, Vol. 65, pp. 465-474.
Ledezma, G. A., and Bejan, A., 1997, “Optimal Geometric Arrangement of Staggered Vertical Plates in Natural Convection,” ASME Journal of Heat Transfer, Vol. 119, pp. 700-708.
Martynenko, O. G., and Khramtsov, P. P., 2005 Free Convection Heat Transfer, 1st ed., Springer Berlin Heidelberg, New York.
McAdams, W. H., 1954, Heat Transmission, 3rd ed., McGraw-Hill, New York.
O’Brien, R. J., and Shine, A. J., 1967, “Some Effects of Electric Fields on Heat Transfer From a Vertical Plate in Free Convection,” ASME Journal of Heat Transfer, Vol. 89, pp. 114-115
Ohadi, M. M., Nelson, D. A., and Zia, S., 1991, “Heat Transfer Enhancement of Laminar and Turbulent Pipe Flow via Corona Discharge,” International Journal of Heat and Mass Transfer, Vol. 34, pp.1175-1187.
OSRAM Opto Semiconductors, 2004, “Display Backlighting with LEDs,”
Owsenek, B. L., Seyed-Yagoobi, J., and Page, R. H., 1995, “Experimental Investigation of Corona Wind Heat Transfer Enhancement With a Heated Horizontal Flat Plate,” Journal of Heat Transfer, Vol. 117, pp. 309-315.
Owsenek, B. L., and Seyed-Yagoobi, J., 1997, “Theoretical and Experimental Study of Electrohydrodynamic Heat Transfer Enhancement through Wire-Plate Corona Discharge,” Journal of Heat Transfer, Vol. 119, pp. 604-610.
Philips Lumileds, 2010, “Data Sheet DS65: Luxeon Rebel Direct Color Portfolio,”
Qureshi, Z. M., and Gebhart, B., 1978, “Transition and Transport in a Buoyancy Driven Flow in Water Adjacent to Vertical Uniform Flux Surface,” International Journal of Heat and Mass Transfer, Vol. 21, pp. 1467-1479
Rashkovan, A., Sher, E., and Kalman, H., 2002, “Experimental Optimizatio of An Electric Blower by Corona Wind,” Appiled Thermal Engineering, Vol. 22, pp. 1587-1599.
Tanda, G., 1993, “Natural Convection Heat Transfer From a Staggered Vertical Plate Array,” ASME Journal of Heat Transfer, Vol. 115, pp. 938-945.
Van de Pol, D. W., and Tierney, J. K., 1973, “Free Convection Nusselt Number for Vertical U-Shaped Channels,” Journal of Heat Transfer, Vol. 95. Quoted in Yeh, L. T., Chu, R. C., 2002, Thermal Management of Microelectronic Equipment, ASME Press, New York.
Velkoff, H. R., and Godfrey, R., 1979, “Low-Velocity Heat Transfer to a Flat Plate in The Presence of a Corona Discharge in Air,” Journal of Heat Transfer, Vol. 101, pp. 157-163.
黃政德,2005,以EHD技術增加LED散熱效率之研究,國立清華大學動力機械工程學系碩士論文,新竹。
李冠賢,2010,垂直放置鰭片之自然對流熱傳性能實驗研究,國立中央大學機械工程學系碩士論文,中壢。
|