參考文獻 |
1.Health and Safety Executive, Successful Health and Safety Management, HSE Books HSG 65, 1991.
2.British Standards Institution, Occupational Health and Safety Management System –Guide, BS 8800: 2004, 2004.
3.British Standards Institution, Occupational Health and Safety Management Systems –Requirements, OHSAS 18001:2007, 2007.
4.British Standards Institution, Occupational Health and Safety Management Systems –Guidelines for the Implementation of OHSAS 18001:2007, OHSAS 18002: 2008, 2008.
5.International Labour Organization, Guidelines on Occupational Safety and Health Management Systems, ILO-OSH 2001, 2001.
6.American Industrial Hygiene Association, Occupational Health and Safety Management Systems, ANSI/AIHA Z10-2005, 2005.
7.Canadian Standards Association, Occupational Health and Safety Management, CSA Z1000-06, 2006.
8.行政院勞工委員會,臺灣職業安全衛生管理系統指導綱領,2008。
9.行政院勞工委員會,勞工安全衛生組織管理及自動檢查辦法,2008。
10.European Agency for Safety and Health at Work, 2010.
http://osha.europa.eu/en
11.Health and Safety Executive (HSE), 2010.
http://www.hse.gov.uk/index.htm
12.Japan Industrial Safety and Health Association, 2010.
http://www.jisha.or.jp/index.html
13.Parliament of the United Kingdom, Health and Safety at Work etc. Act, HSW, 1974.
14.Health and Safety Commission, Management of Health and Safety at Work Regulations 1999 Approved Code of Practice and guidance, HSE Books MHSWR, 2000.
15.S.A. Gadd, D.M. Keeley, H.F. Balmforth, Pitfalls in Risk Assessment: Examples from the UK, Safety Science, 42, pp.841– 857, 2004.
16.J.M. Woodruff, Consequence and Likelihood in Risk Estimation: Matter of Balance in UK Health and Safety Risk Assessment Practice, Safety Science, 43, pp.345– 353, 2005.
17.Standards Australia and Standards New Zealand, Risk Management AS/NZS 4360:2004. Jointly published by Standards Australia International Ltd., Sydney & Standards New Zealand, Wellington, 2004.
18.M. Middleton and A. Franks, Using Risk Matrices, Chemical Engineer, issue 723, pp.34 – 37, 2001.
19.H. Ni, A. Chen, N. Chen, Some Extensions on Risk Matrix Approach, Safety Science, 2010.
20.Health and Safety Executive, Reducing Risks, Protecting People –HSE’s Decision-making Process, 2001.
21.P. Barringer, Risk-Based Decisions, Barringer and Associates, Inc., 2004.
22.行政院勞工委員會,危害辨識及風險評估技術指引,2009。
23.G. Wilkinson and R. David, Back to Basics: Risk Matrices and ALARP, Safety-critical Systems: Problems, Process, and Practice, pp.179 – 182, 2009.
24.王世煌,工業安全風險評估,揚智文化,2002。
25.V. M. Fthenakis and S.R. Trammell, Reference Guide for Hazard Analysis in PV Facilities, Brookhaven National Laboratory, 2003.
26.I. Maragakis, S. Clark et al., Guidance on Hazard Identification, Safety Management System and Safety Culture Working Group, 2009.
27.U.S. Department of Energy, DOE Handbook, DOE-HDBK-1100-2004, Chemical Process Hazards Analysis, Washington, DC, August 2004.
28.Guidelines for Chemical Process Quantitative Risk Analysis, Center for Chemical Process Safety of the American Institute of Chemical Engineers, New York, 1989.
29.Principles of Risk Management, 2005.
http://www.ceet.niu.edu/depts/tech/asse/tech482/Riskmgt_notes.pdf
30.Process Risk Management, Sutton Technical Books, Houston, Texas, 2007.
31.H. Ozog, Designing an Effective Risk Matrix, ioMosaic Corporation, 2009.
32.Electronic Risk Score Calculator, 2010.
http://www.riskex.com.au/risk_score_calculator.htm
33.D. Allen, Web-Based Process Engineering Risk Calculator, 1998.
http://www.cheque.uq.edu.au/ugrad/theses/1998/DaveA/index.html
34.V.M. Trbojevic, Risk Criteria in EU, Risk Support Limited, London, U.K., 2005.
35.D. Kim, I. Moon, Y. Lee, D. Yoon, Automatic Generation of Accident Scenarios in Domain Specific Chemical Plants, Journal of Loss Prevention in the Process Industries, 16, pp.121– 132, 2003.
36.葉宇光,事件樹於職業安全風險評估應用研究,國立中央大學環境工程研究所碩士論文,2009。
37.Guide to Achieving Effective Occupational Health and Safety Performance, BS 18004: 2008, British Standards Institution, London, 2008.
38.Standard Practice for System Safety, MIL-STD-882D, Department of Defense, 2000.
39.Guideline for Risk Management, 2009.
http://www.nasa.gov/centers/ivv/pdf/209213main_S3001.pdf
40.Ranking Risks: Rare to Certain, Negligible to Catastrophic, 2008.
http://www.projectsmart.co.uk/pdf/ranking-risks-rare-to-certain-negligible-to-catastrophic.pdf
41.陳秋蓉、何俊傑,我國職災勞工死亡經濟成本之估算,行政院勞工委員會勞工安全衛生研究所,1997。
42.J.F. Whiting, Risk Tolerability Framework – Developing and Implementing a Practical Workable Framework for your Workplace, APOSHO conference, 2001.
43.勞工安全衛生設施規則,2007。
44.局限空間作業危害預防要點,行政院勞工委員會,2003年。
45.局限空間氣體危害預防手冊,行政院勞委會勞工安全衛生研究所,2004。
46.勞工安全衛生管理實務見解,2009。
http://www.epza.gov.tw/%2Fself_store%2F282%2Fself_attach%2F981105%E5%AE%A3%E5%B0%8E%E6%9C%83%E8%AC%9B%E7%BE%A9_.ppt
47.工安警訊,行政院勞委會勞工安全衛生研究所,2007。
http://www.iosh.gov.tw/Print.aspx?cnid=4&p=325
48.缺氧症預防規則,1998。
49.黃盛修,呼吸防護原理與實務,勞工委員會勞工安全研究所,2008。
http://mail.cmu.edu.tw/~lhy/claz/97HS/SH_W17_resp.pdf
|