摘要(英) |
Electric motors have a wide range of applications, whether or AC motor DC motor also. But their common point is when it starts consuming large current, resulting in shortened battery life, so this paper hybrid approach to reduce the start current consumption to achieve longevity.
The hybrid is the DC brush motor to the air motor for integration, first of all start with air motor driven electric motor, the DC brush motor starts running, producing a back electromotive force, to reduce current consumption to extend battery life target
Beginning of the experiment should be aware of the characteristics of each motor, and then understand the impact of the condition of hybrid and measured in the experiment in hybrid electric current consumption is indeed the case of the reduction. This paper also discusses the output torque of the reasons for hybrid because when torque rises, also means that those who increased consumption of current and speed control into one, the last hope to build a hybrid goal.
|
參考文獻 |
[1]1Ministry of Transportation and Communications R.O.C., http://www.motc.gov.tw, 2007.
[2] Yu-Ta Shen, Yean-Ren Hwang, Design and implementation of an air-powered motorcycles, Appl Energy 2009;86;1105-1110.
[3] S.R. Pandian, F. Takemura, Y. Hayakawa, and S. Kawamura, Control performance of an air motor - can air motors replace electric motors, Robotics and Automation, IEEE Int. Conference on, vol. 1, pp.518-524, 1999.
[4] Wang J., Pu J., Moore P.R., Modeling study and servo-control of air motor systems, International journal of control, vol. 71, no. 3, pp. 459-476, 1998.
[5] Van Varseveld R.B., Bone G.M., Accurate position control of a pneumatic actuator using on/off solenoid valves, IEEE/ASME Transactions on Mechatronics, vol. 2, no. 3, pp. 195-204, 1997.
[6] Yean-Ren Hwang, Yu-Da Shen, Fuzzy MRAC controller design for the van-type air motor, SICE Annual Conference, pp. 180-185, 2007.
[7] Eric Monmasson, Marcian N. Cirstea, FPGA design methodology for industrial control systems - a review, Industrial Electronics, IEEE Transactions on, vol. 54, pp. 1824-1842, 2007.
[8] Douglas J. Smith, HDL chip design, Doone publication, 1996.
[9] Karl J. Astrom, Bjorn Wittenmark, Adaptive control, 2nd edition, Pearson education, 2006.
|