參考文獻 |
[1] John Boyd,"Epson Toyocom的QMEMS元件將石英晶體帶進21世紀"Seiko Epson Corp.(2007)
[2] P.Rangsten, C.Hedlund, I.V. Katardjiev and Y.B‥acklund.“Etch rates of crystallographic planes in Z-cut quartz - experiments and simulation”, J. Micromech. Microeng. pp.1–6.(1998)
[3] K.Sato, K.Asaμmi, G.Kobayashi, Y.Iriye,M.Shikida,“Development of an orientation-dependent anisotropic etching simulation system MICROCAD”, Electronics and Communications in Japan, Part 2, Vol.83, No.4, pp.13-22.(2000)
[4]...D.Cheng, K.Sato, M.Shikida, A.Ono, KenjilSato, K.Asaμmiland Y.Iriye. “Development of Quartz Etching Database and 3-D Micromaching Simulation System” , international symposimm on micro mechatronics and human science, IEEE, pp.281-285.(2003)
[5] J.S.Danel and G.Delapierre, “Quartz:A Material for Microdevices”, J. Micromech Microeng , Vol.,pp.187-198(1991)
[6] R.J.Jaccodine. “Use of Modified Free Energy Theorems to Predict Equilibriμm Growing and Etching Shapes”, Bell Telephone Laboratories, Inc. Allentown,Pennsylvania. pp.2643-2647(1962)
[7] “Basic Technology of Quartz Crystal Resonators” , Fortiming Corporation,
Trigen Industries Ltd. 三代電子有限公司(2001)
[8] Hermann Jean,”Torsional mode CT or DT cut quartz resonator”,United States Patent(1978)
[9] 呂亞林,"石英晶體微天平研究進展與展望",北京大學口腔醫院(2004)
[10] John R.Vig, Tutorial on Quartz Crystal Resonators and Oscillators (2001)
[11] Sungkyu LEE,“Photolithography and Selective Etching of an Array”, Jpn.J.Appl.Phys. Vol.40 pp.5480-5484(2001)
[12] C.Hedlund, Ulf.Lindberg, Urban Bucht,and Jan Soderkvist. “Anistropic etching of Z-cut quartz”,J.Micromech.Microeng , pp.65-73.(1993)
[13] A.C.McLaren, D.R.Pitkethly, “The Twinning Microstructure and Growth of Amethyst Quartz”, Plays Chem Minerals,pp.128-135(1982)
[14] J. D. H. Donnay,Yvon Le Page, “The Vicissitudes of the Low-Quartz Crystal Setting or the Pitfalls of Enantiomorphism”,pp.584-594(1978)
[15]...William Fortune Smith,“Principles of materials science and engineering”,Chapter 3(2007)
[16] C. M. R. Fowler, “ The solid earth: an introduction to global geophysics”(2004)
[17] Hans-Rudolph Wenk,Andrei Bulakh“Minerals-Their Constitution and Origin” (2004)
[18] W.E.Lee and K.P.D.Lagerlof,“Structural and Electron Diffraction Data for Sapphire (a-Al2O3) ”, Journal of Electron Microscopy technique, pp247-258 (1985)
[19] F.Pascal-Delannoy,B.Sorli,A.Boyer,“Quartz Crystal Microbalance(QCM) used as hμmidity sensor”,Sensors and Actuators 84,pp.285–291(2000)
[20] Erich Uttenthaler, Michael ScHRand Johannes Mandel, “Ultrasensitive quartz crystal microbalance sensors for detection of M13-Phages in liquids”,Biosensors & Bioelectronics 16,pp.735-743(2001)
[21] "微機電系統技術與應用",國家實驗研究院儀器科技研究中心。(2003)
[22] S.H.Jones, D.K. Walker ,“Highly Anisotropic Wet Chemical Etching of GaAs Using NH4OH:H2O2:H2O”, Journal of The Electrochemical Society.Vol.137 pp.1653-1654(1990)
[23] J. Wang, H. Niino, A. Yabe,“Micromachining of quartz crystal with excimer lasers by laser-induced backside wet etching”, Appl. Phys. A 69.pp.S271–S273 (1999)
[24] Kopitkovas G, Lippert T, David C, Wokaun A, Gobrecht J,“ Fabrication of micro-optical elements in quartz by laser induced backside wet etching”, Microelectronic Engineering,Vol.67-8 , pp.438-444 (2003)
[25] P.Suda, A.E. Zμmsteg and W.Zingg , “Anisotropic of Etching Rate For Quartz in Ammonimm Bifluoride”, OMEGA,Quartz Division, Bienne/Switzerland, (1979)
[26] G. Dahm, I.W. Rangelow, P. Hudek a, H.W.P. Koops b“Quartz etching for phase shifting masks”, Microelectronic Engineering, pp.263-266.(1995)
[27] Takayuki Fukasawa,Yasuhiro Horiike,“Deep Dry Etching of Quartz Plate Over 100 μm in Depth Employing Ultra-Thick Photoresist (SU-8)”, Jpn.J.Appl.Phys.42,pp.3702-3706(2003)
[28] 李世鴻,"積體電路製程技術",五南圖書公司(2003)
[29] Yasuhiro Morikawa,Tooru Koidesawa,Toshio Hayashi,Koukou Suu,“A novel deep etching technology for Si and quartz materials”, Institute for Semiconductor Technologies,pp.4918–4922(2006)
[30] Keith J. Laidler,”The Development of the Arrhenius Equation“, Journal of Chemical Education,pp.494-498(1984)
[31] Miguel A.Gosalvez, Risto M.Nieminen and Kazuo Sato,“ Arrhenius and Non-Arrhenius Behaviour During Anisotropic Etching“, Sensors and Materials,Vol.17,No.4,pp.189 - 199 (2005)
[32] 余志成,"光罩設計與非等向蝕刻模擬",國立高雄第一科技大學機械系(2007)
[33] Stephen D. Senturia, “Microsystem design”,Boston : Kluwer Academic Publishers, 2001.
[34]..Microposit S1800 Series Photo Resist Datasheet, SIPLEY
[35] Kirt R.Williams, Senior Member, IEEE, Kishan Gupta, Student Member, IEEE, and Matthew Wasilik, “Etch Rates for Micromachining Processing-Part II”, Microelectro Mechanical Systems, IEEE pp.772.(2003)
[36] Hajime Ugajin, Hayato Iwamoto, Kei Kinoshita “Direct Mixing Cleaning Method of AquaRegia on Wafer”, Solid State Phenomena, Vols.103-104, pp.245-248(2005)
[37] Peter Van Zant著,姜庭隆譯 "半導體製程" p.275-276
[38]"石英晶體频率和温度特性",石英晶體行業門戶網站http://www.xtaler.com (2007)
|