參考文獻 |
[1] H. A. Macleod, ”Characteristics of thin-film dielectric material”, Chap. 15 in Thin-Film Optical Filters, 3rd Ed. (Academic, London, 2001), pp. 621-627.
[2] C. C. Lee, J. C. Hsu, D. T. Wei, and J. H. Lin, “Morphology of dual beam ion sputtered films investigated by atomic force microscopy,” Thin Solid Films 308-309 ,pp.74-78 (1997).
[3] L. J. Meng, M. Andrtschky and M. P. Dos Santos, ”The effect of substrate temperature on the properties of d.c. reactive magnetron sputtered titanium oxide films”, Thin Solid Films, 223, pp.242-247 (1993).
[4] W. H. Cheng, S. F. Chi, and A. K. Chu, “Effect of thermal stresses on temperature dependence of refractive index for Ta2O5 dielectric films,” Thin Solid Films, 347, pp. 233-237(1999)
[5] G. Q. Di, “Surface morphology and optical properties of Ta2O5 films prepared by radio frequency sputtering” Acta Physica Sinica, 60 (3), 038101 (2011).
[6] G. Xu, P. Jin, M. Tazawa and K. Yoshimura, ”Optical investigation of silicon nitride thin films deposited by r.f. magnetron sputtering,” Thin Solid Films, 425, pp.196-202 (2003).
[7] M. F. Lambrinos, R. Valizadeh, J. S. Colligon Electrical properties of ion beam sputtered and ion assisted SiO2, SiOxNy, and SiNx films on silicon,” Journal of Vacuum Science & Technology B, 16(2), pp. 589-598 (1998).
[8] R. P. Howson, N. Danson, G. W. Hall, “ Reactive magnetron sputtering of silicon to produce silicon oxide”, Nuclear Instruments and Methods in Physics Research B, 121, pp. 90-95, (1997).
[9] A. Tabata, N. Matsuno, Y. Suzuoki and T. Mizutani, “Optical properties and structure of SiO2 films prepared by ion-beam sputtering,” Thin Solid Films, 289, pp. 84-89, (1996).
[10] A. Hallbauer, D. Huber, G.N. Strauss, S. Schlichtherle, A. Kunz, H.K. Pulker,” Overview about the optical properties and mechanical stress of different dielectric thin films produced by reactive-low-voltage-ion-plating,” Thin Solid Films, 516, pp. 4587– 4592(2008).
[11] I. Safi,” Recent aspects concerning DC reactive magnetron sputtering of thin films: a review,” Surface and Coatings Technology, 127(2-3), pp. 203-218 (2000).
[12] J. Musil, P. Baroch, J. Vlček, K.H. Nam and J.G. Han,” Reactive magnetron sputtering of thin films: present status and trends,” Thin Solid Films, 475(1-2), pp. 208-218 (2005).
[13] 艾啟峰,“活化反應磁控濺射沉積技術新發展”,工業材料,187,pp. 101-109 (1992).
[14] O. Stenzel, S. Wilbrandt, N. Kaiser, M. Vinnichenko, F. Munnik, A. Kolitsch, A. Chuvilin , U. Kaiser , J. Ebert, S. Jakobs, A. Kaless, S. Wüthrich, O. Treichel, B. Wunderlich, and M. Bitzer, M. Grössl,” The correlation between mechanical stress, thermal shift and refractive index in HfO2 , Nb2O5 , Ta2O5 and SiO2 layers and its relation to the layer porosity,” Thin Solid Films, 517, pp. 6058–6068 (2009).
[15] H. Leplan and B. Geenen, J. Y. Robic, and Y. Pauleau,” Residual stresses in evaporated silicon dioxide thin films: Correlation with deposition parameters and aging behavior,” J. Appl. Phys., 78(2), pp. 962-968(1995).
[16] C. C. Lee, H. C. Chen, and C. C. Jaing, “Effect of thermal annealing on the optical properties and residual stress of TiO2 films Produced by ion-assisted deposition,” Appl. Opt., 44, pp. 2996-3000(2005).
[17] L. Hultman, C. Engstrom, J. Birch, M. P. Johansson, M. Oden, L. Karlsson, and H. Ljungcrantz,” Review of the thermal and mechanical stability of TiN-based thin films,” Zeitschrift Fur Metallkunde, 90(10),pp. 803-813(1999).
[18] L. Liu, Y. Wang, and H. Gong,” Annealing effects of tantalum films on Si and SiO2/Si substrates in various vacuums,” Journal of Applied Physics, 90(1), pp. 416-420(2001).
[19] U. Schmid and H. Seidel,” Effect of substrate properties and thermal annealing on the resistivity of molybdenum thin films,” Thin Solid Films, 489(1-2), pp. 310-319(2005).
[20] W. J. Liu and C. H. Chien,” Influences of residual argon gas and thermal annealing on Ta2O5 thin films,” Japanese Journal of Applied Physics Part 1-Regular Papers Short Notes & Review Papers, 44(1A), pp. 181-186(2005).
[21] S. Tamulevicius,“ Stress and strain in the vacuum deposited thin films,” Vacuum, 51(2), pp.127-139(1998) .
[22] S. J. Bull, A. M. Jones, and A. R. Mccabe,” Residual-stress in ion-assisted coatings,” Surface & Coatings Technology, 54(1-3), pp. 173-179(1992).
[23] N. Durand, K. F. Badawi, P. Goudeau,” Residual stresses and microstructure in tungsten thin films analyzed by x-ray diffraction-evolution under ion irradiation,” Journal of Applied Physics, 80(9), pp. 5021-5027(1996).
[24] S. G. Mayr and R. S. Averback,” Effect of ion bombardment on stress in thin metal films,” Physical Review B, 68(21), 214105(2003).
[25] A. Misra, S. Fayeulle, H. Kung, T. E. Mitchell, and M. Nastasi,” Effects of ion irradiation on the residual stresses in Cr thin films ,” Applied Physics Letters, 73(7), pp.891-893(1998).
[26] H. Lu , Y. Q. Tu, X. A. Lin , B. Fang , D. B. Luo,” Laaksonen AEffects of laser irradiation on the structure and optical properties of ZnO thin films,” Materials Letters, 64(19), pp. 2072-2075(2010).
[27] Y. Sano, N. Mukai, K. Okazaki, and M. Obata,” Residual stress improvement in metal surface by underwater laser irradiation,” Nuclear Instruments & Methods in Physics Research Section B-beam Interactions with Materials and Atoms, 121(1-4), pp. 432-436(1997).
[28] B. H. Kim, Y. Park, T. J. Ahn, D. Y. Kim, B. H. Lee, Y. Chung, U. C. Paek, and W. T. Han,” Residual stress relaxation in the core of optical fiber by CO2 laser irradiation,” Optics Letters, 26(21), pp. 1657-1659(2001)
[29] E. Cappelli, C. Scilletta , S. Orlando , V. Valentini, and M. Servidori,” Laser annealing of amorphous carbon films,” Applied Surface Science, 255(10), pp. 5620-5625(2009) .
[30] N. Arimitsu, A. Nakajima, K. Saito, Y. Kameshima, K. Okada,” Effects of vacuum ultraviolet light illumination on the residual stress in sol-gel-derived titanium dioxide films,” Chemistry Letters, 36(1), pp. 106-107(2007).
[31] T. Matsumoto, N. Ikuta, M. Mori, K. Nagayama,” Mechanics of wrinkle formation: micromechanical analysis of skin deformation during wrinkle formation in ultraviolet-irradiated mice,” Skin Research and Technology, 16(2), pp.179-189(2010).
[32] A. L. Del Vecchio and F. Spaepen,” The effect of deposition rate on the intrinsic stress in copper and silver thin films,” Journal of Applied Physics, 101, 063518(2007).
[33] J. A. Ruud, A. Witvrouw, and F. Spaepen,” Bulk and interface stresses in silver-nickel multilayered thin films” J. Appl. Phys., 74(4), pp.2517-2523( 1993)
[34] A. L. Shull and F. Spaepen,” Measurements of stress during vapor deposition of copper and silver thin films and multilayers,” J. Appl. Phys. 80(11), pp. 6243-6256(1996).
[35] E. Chason, B. W. Sheldon, L. B. Freund, J. A. Floro, and S. J. Hearne,” Origin of Compressive Residual Stress in Polycrystalline Thin Films,” Physical Review Letters, 88(15), 156103(2002).
[36] J. A. Floro, P. G. Kotula, S. C. Seel, and D. J. Srolovitz,” Origins of Growth Stresses in Amorphous Semiconductor Thin Films,” Physical Review Letters, 91(9), 096101(2003).
[37] S. C. Seel and C. V. Thompson,” Tensile stress evolution during deposition of Volmer-Weber thin films,” J. Appl. Phys., 88(12), pp. 7079-7088(2000).
[38] J. A. Floro, S. J. Hearne, J. A. Hunter, P. Kotula, E. Chason, S. C. Seel, and C. V. Thompson,” The dynamic competition between stress generation and relaxation mechanisms during coalescence of Volmer-Weber thin films,” J. Appl. Phys., 89(9), pp. 4886-4897(2001).
[39] F. Spaepen,” Interfaces and stresses in thin films,” Acta mater., 48, pp. 31-42(2000).
[40] V. Ramaswamy , W.D. Nix, B.M. Clemens,” Coherency and surface stress effects in metal multilayers,” Scripta Materialia, 50, pp. 711–715(2004).
[41] N. Kaiser, “Review of the fundamentals of thin-film growth,” Appl. Opt. 41, 3053-3060 (2002).
[42] J. A. Thornton,“ Influence of apparatus geometry and deposition conditions on the structure and topography of thick sputtered coatings,” J. Vac. Sci. Technol. 11, pp. 666-672 (1974).
[43] R. W. Hoffman, in physical of nonmetallic Thin films, edited by C.H.S. Dupuy and A. Cachard, Plenum Press: New York, pp. 273 (1969).
[44] J. D. Finegan and R.W. Hoffman, “Stress anisotropy in evaporated Iron Films,” J. Appl. Phys. 30, pp. 597-598 (1959).
[45] R.W. Hoffman and H. S. Story,” Stress Annealing in Copper Films,” J. Appl. Phys. 27, 193 (1956).
[46] R. W. Hoffman and F.J. Anders, J. Appl. Phys. 23, 231 (1953).
[47] H. K. Pulker. “Mechanical properties of optical films,” Thin Solid Films, 89, 191 (1982).
[48] R. C. Sun, T. C. Tisone, P. D. Cruzan,” The origin of internal stress in low-voltage sputtered tungsten films,” J. Appl. Phy. 46(1), (1975).
[49] W. D. Nix, “Mechanical Properties of thin films,” Metallurgical Trans. A, 20, pp. 2217-2245 (1989).
[50] J. A. Floro, E. Chason, S. R. Lee,“Real time measurementof epilayer strain using a simplified wafer curvature technique,” Mater. Res. Soc. Symp. Proc., 406, 491 (1996).
[51] F. M. D’Hecurle, “Aluminum films deposited by rf sputtering,” Metallurgical Trans., I, pp. 725-732 (1970).
[52] K. H. Muller, “Model for ion assisted thin film densification.” J. Appl. Phys., 59, 2803 (1986).
[53] K. H. Muller, “Ion-beam induced epitaxial vapour-phase growth: a molecular dynamics study,” Phys. Rev.B, 35, 7906 (1987).
[54] K. H. Muller,” Stress and microstructure of sputter deposited thin films: molecular dynamics investigations,” J. Appl. Phys., 62, 1796 (1987).
[55] H. Windischmann, “An Intrinsic Stress Scaling Law for Polycrystalline Thin Film Prepared by Ion Beam Sputtering”, J. Appl. Phys., 62, pp. 1800-1807 (1987).
[56] C. A. Davis, “A simple model for the formation of compressive stress film by ion bombardment,” Thin Solid Films, 226, 30 (1993).
[57] L. B. Freund, S. Suresh, ” Thin film materials : stress, defect formation and surface evolution ”, Cambridge, UK, chapter 2,2003.
[58] A.E. Ennos, “Stress developed in optical film coatings”, Appl. Opt., 5, pp.51-61(1966).
[59] G. C. A. M. Janssen,” Stress and strain in polycrystalline thin film”, Thin Solid Films, 515(17), pp. 6654~6664( 2007).
[60] C. J. Chen,” Introduction to Scanning Tunneling Microscopy,” Oxford University Press, New York ,1993.
[61] G. G. Stoney,“ The tension of metallic films deposited by electrolysis,” Proc. R. Soc. London Ser. A , 82, 172–175 (1909).
[62] K. Siegbahn, C. Nordling, A. Fahlman, R. Nordberg, K. Hamirin, J. Hedman, G. Johansson, T. Bergmark, S. E. Karlsson, I. Lindgren, and B. Lindgren, Atomic ,Molecular and Solid State Structure Studied by Means of Electron Spectroscopy, Almqvist & Wiksells, Stockholm, 1967.
[63] G. Koley, V. Tilak, L. F. Eastman, and M. G. Spencer,” Slow transients observed in AlGaN/GaN HFETs: effects of SiNx passivation and UV illumination,” IEEE Transactions on Electron Devices, 50(4), pp. 886-893(2003)
[64] .H Mackel and R. Ludemann,” Detailed study of the composition of hydrogenated SiNx layers for high-quality silicon surface passivation,” J. Appl. Phys., 92(5), pp. 2602-2609 (2002).
[65] W. D. Huang, X. H. Wang, M. Sheng, L. Q. Xu, F. Stubhan, L. Luo, T. Feng, X. Wang, F. M. Zhang, and S. C. Zou,” Low temperature PECVD SiNx films applied in OLED packaging,” Materials Science and Engineering B-solid State Materials for Advanced Technology, 98(3), pp. 248-254(2003).
[66] A. A. Abdallah, K. Lu, C. D. Ovchinnikov, C. W. Bulle-Lieuwma, P. C. P. Bouten, and G. With,” The adhesion of SiNx thin layers on silica-acrylate coated polymer substrates,” Surface & Coatings Technology, 204(1-2), pp.78-84(2009).
[67] S. Guruvenket, D. Li, J. E. Klemberg-Sapieha, L. Martinu, and J. Szpunar,” Mechanical and tribological properties of duplex treated TiN, nc-TiN/a-SiNx and nc-TiCN/a-SiCN coatings deposited on 410 low alloy stainless steel,” Surface & Coatings Technology, 203(19), pp.2905-2911(2009).
[68] R. Rabe, J. M. Breguet, P. Schwaller, S. Stauss, F. J. Haug, J. Patscheider, and J. Michler,” Observation of fracture and plastic deformation during indentation and scratching inside the scanning electron microscope,” Thin Solid Films, 469, pp. 206-213( 2004).
[69] S. Masuda, K. Kitamura, Y. Okumura, S. Miyatake, H. Tabata, and T. Kawai,” Transparent thin film transistors using ZnO as an active channel layer and their electrical properties,” J. Appl. Phys., 93(3), pp. 1624-1630 (2003).
[70] Y. Kuo,” PECVD Silicon Nitride as a Gate Dielectric for Amorphous Silicon Thin Film Transistor” Journal of the Electrochemical Society, 142(1), pp. 186-190(1995).
[71] D. H. Yoon, S. G Yoon, and Y. T. Kim,” Refractive index and etched structure of silicon nitride waveguides fabricated by PECVD,” Thin Solid Films, 515(12), pp. 5004-5007( 2007).
[72] A. Bengi, S. J. Jang, C. I. Yeo, T. Mammadov, S. Ozcelik, and Y. T. Lee,” A comparative study on ridge waveguide laser diodes with SiO2 and SiNx passivation layers,” Surface and Interface Analysis, 42(6-7), pp. 963-965(2010).
[73] J. H. Kim and K. W. Chung,“ Microstructure and properties of silicon nitride thin films deposited by reactive bias magnetron sputtering,” J. Appl. Phys., 83(11), pp. 5831-5839 (1998).
[74] R. K. Pandey, L. S. Patil, J. P. Bange and D. K. Gautam, “Growth and characterization of silicon nitride films for optoelectronics applications,” Optical Materials, 27(2), pp. 139–146 (2004).
[75] L. S. Patil, R. K. Pandey, J. P. Bange, S. A. Gaikwad, and D. K. Gautam, “Effect of deposition temperature on the chemical properties of thermally deposited silicon nitride films,” Optical Materials, 27(4), pp. 663–670 (2005).
[76] P. L. Ong, J. Wei, E. H. Tay, and C. Iliescu, “A new fabrication method for low stress PECVD – SiNx layers,” Journal of Physics: Conference Series, 34, pp. 764–769 (2006).
[77] C. C. Lee, H. L. Chen, J. C. Hsu, and C. L. Tien, “Interference coatings based on synthesized silicon nitride,” Appl. Opt., 38(10), pp. 2078-2082 (1999).
[78] B. G. Bovard, J. Ramm, R. Hora, and F. Hanselmann, “Silicon nitride thin films by low voltage reactiveion plating: optical properties and composition,” Appl. Opt., 28(20), pp. 4436-4441 (1989).
[79] M. F. Lambrinos, R. Valizadeh, and J. S. Colligon, “Effects of bombardment on optical properties during the deposition of silicon nitride by reactive ion-beam sputtering,” Appl. Opt., 35(19), pp. 3620-3626 (1996).
[80] L. Huang, K. W. Hipps, J. T. Dickinson, U. Mazur, and X. D. Wang, “Structure and composition studies for silicon nitride thin films deposited by single ion beam sputter deposition,” Thin Solid Films, 299, pp. 104-109 (1997).
[81] D. Bouchier, G. Gautherin, C. Schwebel, and A. Bossesbouef, “Low temperature deposition of silicon nitride by reactive ion-beam sputtering,” J. Electrochem., Soc. 130, pp. 638-644 (1983).
[82] A. Grill, “Ion beam reactively sputtered silicon nitride coating,” Vacuum, 33, pp. 329-332 (1983).
[83] A. Foutier, A. Bosseboeuf, D. Bouchier, and G. Gautherin, “Annealing effect on mechanical stress in reactive ion-beam sputter-deposited silicon nitride films,” Jpn. J. Appl. Phys., 30(7), pp. 1469-1474 (1991).
[84] S. K. Ray, S. Das, C. K. Maiti, S. K. Lahiri, and N. B. Chakraborti, “Effect of reactive-ion bombardment on the properties of silicon nitride and oxynritride films deposited by ion-beam sputtering,” J. Appl. Phys., 75, pp. 8145-8152 (1994).
[85] J. Becker and V. Scheuer, “Coating for optical application produced by ion beam sputter deposition,” Appl. Opt., 29(28), pp. 4303-4309 (1990).
[86] E. Dehan, P. Temple-Boyer, R. Henda, J. J. Pedroviejo, and E. Scheid, “Optical and structural properties of SiOx and SiNx materials,” Thin Solid Films, 266, pp. 14-19 (1995).
[87] A. Batan, A. franquet, J. Vereecken, and F. Reniers, “Characterization of the silicon nitride thin films deposited by plasma magnetron,” Surf. Interface Anal. ,40, pp. 754-757 (2008).
[88] Y. Zhao, M. Mao, R. Horowitz, A. Majumdar, J. Varesi, P. Norton, and J. Kitching, “Optomechanical Uncooled Infrared Imaging System:Design, Microfabrication, and Performance”, Journal of Microelectromechanical Systems, 11(2), pp. 136-146 (2002)
[89] P. I. Hsu, H. Gleskova, M. Huang, Z. Suo, S. Wagner, J. C. Sturm, ”Amorphous Si TFTs on plastically deformed spherical domes,” J. Non Cryst. Solids 299-302, 1355-1359 (2002).
[90] I-Chun Cheng, Alexis Kattamis, Ke Long, James C. Sturm, Sigurd Wagner, “Stress control for overlay registration in a-Si:H TFTs on flexible organic-polymer-foil substrates,” Journal of the SID 13, 563-568 (2005).
[91] Hiroto Sato, Hideo Fujikake, Takeshi Murashige, Hiroshi Kikuchi, Taiichiro Kurita, and Fumio Sato, “A4-sized flexible ferroelectric liquid-crystal displays with micro color filters,” Journal of the SID 13, 461-468 (2005).
[92] Frederik C. Krebs, “Fabrication and processing of polymer solar cells: A review of printing andcoating techniques,” Sol. Energy Mater. Sol. Cells 93, 394-412 (2009).
[93] 吳駿逸, “不同製程下以Si與SiO2為起始材料所製鍍出的SiO2 薄膜特性研究”,中央大學, 博士論文, 民國95年。
[94] Bergeron, J. E. Klemberg-Sapieha, and L. Martinu, “Structure of the interfacial region between polycarbonate and plasma deposited SiN1.3 and SiO2 optical coatings studied by ellipsometry,” J. Vac. Sci. Technol. A 16 6, pp. 3227-3234 (1998).
[95] Hofrichter, P. Bulkin, and B. Dre´ villon, “Plasma treatment of polycarbonate for improved adhesion,” J. Vac. Sci. Technol. A 20(1), pp. 245-250 (2002).
[96] 詹德均,“以氧離子束輔助磁控濺鍍光學薄膜之研究”,中央大學,博士論文,民國94年。
[97] N. T. Gabriel, S. S. Kim, and J. J. Talghader,” Control of thermal deformation in dielectric mirrors using mechanical design and atomic layer deposition,”Optics Letters, 34(13), pp. 1958-1960(2009)
[98] F. Richter, H. Kupfe, P. Schlott, T. Gessner, C. Kaufmann," Optical properties and mechanical stress in SiO2/Nb2O5 multilayers," Thin Solid Films 389, pp. 278-283(2001)
[99] C. J. Tang, C. C. Jaing, Kai Wu, C. C. Lee,” Residual stress of graded-index-like films deposited by radio frequency ion-beam sputtering ,” Thin Solid Films, 517 , pp. 1746-1749(2009).
|