參考文獻 |
[1] R.E. Reason, “Progress in the appraisal of surface topography during the first half-century of instrument development ”, Wear, Vol 57, pp. 1-16, 1979.
[2] D.J. Whitehouse, “Stylus contact method for surface metrology in the ascendancy ”, Meas. Control, Vol 31, pp. 48-50, 1998.
[3] A. López, D. Acosta, AI. Martínez and J. Santiago, “Nanostructured low crystallized titanium dioxide thin films with good photocatalytic activity ”, Powder Technol., Vol 202, pp. 111-117, 2010.
[4] H. Toupet, F. Marrec Le, J. Holc, M. Kosec, P. Vilarhino and M.G. Karkut, “Growth and thermal stability of epitaxial BiFeO3 thin films ”, J. Magn. Magn. Mater., Vol 321, pp. 1702-1705, 2009.
[5] Y. Masuda, T. Sugiyama, H. Lin, W.S. Seo and K. Koumoto, “Selective deposition and micropatterning of titanium dioxide thin film on self-assembled monolayers ”, Thin Solid Films, Vol 382, 153-157, 2001.
[6] K.A. O‘Donnell, “Effects of finite stylus width in surface contact profilometry ”, Appl. Optics, Vol 32, pp. 4922-4928, 1993.
[7] C.Y. Poon and B. Bhushan, “Comparison of surface roughness measurements by stylus profiler, AFM and non-contact optical profiler ”, Wear, Vol 190, pp. 76-88, 1995.
[8] F. Forouzbakhsh, J. Rezanejad Gatabi, and I. Rezanejad Gatabi, “A new measurement method for ultrasonic surface roughness measurements ”, Measurement, Vol 42, pp. 702-705, 2009.
[9] H. J. Tiziani, “Optical methods for precision measurements ”,Opt. Quant. Electron., Vol 21, pp. 253-282, 1989.
[10] U. Persson, “Real time measurement of surface roughness on ground surfaces using speckle-contrast technique”, Opt. Lasers Eng., Vol 17, pp. 61-67, 1992.
[11] U. Persson, “Measurement of surface roughness on rough machined surfaces using spectral speckle correlation and image analysis ”, Wear, Vol 160, pp. 221-225, 1993.
[12] P.L. Wong and K.Y. Li, “In-process roughness measurement on moving surfaces ”, Opt. Laser Technol., Vol 31, pp. 543-548, 1999.
[13] C.J. Tay, S.H. Wang, C. Quan, and H.M. Shang, “In situ surface roughness measurement using a laser scattering method ”, Opt. Commun. Vol 218, pp. 1-10, 2003.
[14] E. Kayahan, H. Oktem, F. Hacizade, H. Nasibov, and O. Gundogdu, “Measurement of surface roughness of metals using binary speckle image analysis ”, Tribol. Int., Vol 43, pp. 307-311, 2010.
[15] L.C. Leonard and V. Toal, “Roughness measurement of metallic surfaces based on the laser speckle contrast method ”, Opt. Lasers Eng., Vol 30, pp. 433-440, 1998.
[16] S.R. Restaino, J.R. Andrews, T. Martinez, F. Santiago and D.V.Wick, “Adaptive optics using MEMS and liquid crystal devices ”, J. Opt. A-Pure Appl. Opt., Vol 10, 064006(5pp), 2008.
[17] H.W. Babcock, “The possibility of compensating astronomical Seeing ”, Publ. Astron. Soc. Pac., Vol 65, pp. 229-236, 1953.
[18] L.A. Thompson, “Adaptive Optics in Astronomy ” , Phys. Today, Vol 47, pp. 24-31, 1994.
[19] C. Rao, L. Zhu, X. Rao, C. Guan, D. Chen, J. Lin and Z. Liu, “37-element solar adaptive optics for 26-cm solar fine structure telescope at Yunnan Astronomical Observatory ” , Chin. Opt. Lett., Vol 8, pp. 966-968, 2010.
[20] G. Shi, Y. Dai, L. Wang, Z. Ding, X. Rao and Y. Zhang, “ Adaptive optics optical coherence tomography for retina imaging ” , Opt. Lett., Vol 6, pp424-425, 2008.
[21] C. C’anovas, P. M. Prieto, S. Manzanera, A. Mira and P. Artal, “Hybrid adaptive-optics visual simulator ” , Opt. Lett., Vol 35, pp.196-198, 2010.
[22] L. Tchvialeva, I. Markhvida, H. Zeng, D. I. McLean, H. Lui, and T. K. Lee, “Surface roughness measurement by speckle contrast under the illumination of light with arbitrary spectral profile ” , Opt. Laser Eng., Vol 48, pp.774-778 2010.
[23] U. Persson, “Surface roughness measurement on machined surfaces using angular speckle correlation ” , J. Mater. Process. Technol., Vol 180, pp.233-238, 2006.
[24] K.C. Hsu and Y. K. Fuh, “A Novel In Situ Roughness Measurement Based on Spatial Average Analysis of Binary Speckle Image ”, Advanced Materials Research, Vol 154, pp.1125-1130, 2011.
[25] S. Wang, Y. Tian, C. J. Tay, and C. Quan, “Development of a Laser-Scattering-Based Probe for On-Line Measurement of Surface Roughness ”, Appl. Opt., Vol 42, pp.1318-1324, 2003.
[26] Q. Mu, Z. Cao, L. Hu, D. Li and L. Xuan, “An adaptive optics imaging system based on a high-resolution liquid crystal on silicon device ”, Opt. Express, Vol 14, pp. 8013-8018, 2006.
[27] T.G. Bifano, J. Perreault, R. Krishnamoorthy Mali and M.N. Horenstein, “ Microelectromechanical Deformable Mirrors ”, IEEE J. Sel. Top. Quantum Electron., Vol 5, pp. 83-89, 1999.
[28] M. Hattori and S. Komatsu, “Real-time Adaptive Optics with a Twisted Nematic Liquid Crystal Light Modulator Controlled by the Wave Front Reconstruction Sensor ” , Opt. Rev., Vol 9, pp.126-131, 2002.
[29] C.C. Kuo, “Surface roughness characterization of Al-doped zinc oxide thin films using rapid optical measurement ” , Opt. Lasers Eng. Vol 48, pp. 1166–1169, 2010.
[30] C.C. Kuo and Y.R.Chen, “A new method to characterizing surface roughness of TiO2 thin films ” , Opt. Lasers Eng. Vol 49, pp. 410–414, 2011.
[31] S.H. Baik, S.K. Park, C.J. Kim and B. Cha, “A center detection algorithm for Shack-Hartmann wavefront sensor ” , Opt. Laser Technol., Vol 39, pp. 262-267, 2007.
[32] Q. Mu, “Liquid crystal based adaptive optics system to compensate both low and high order aberrations in a model eye ”, Opt. Lett., Vol 15, pp. 1946-1953, 2007.
[33] J.M. Girkin, S. Poland and A. J. Wright, “Adaptive optics for deeper imaging of biological samples ”, Curr. Opin. Biotechnol., Vol 20, pp. 106-110, 2009.
[34] C. Li, M. Xia, B. Jiang, Q.Mu, S.Chen and L. Xuan, “Retina imaging system with adaptive optics for the eye with or without myopia ”, Opt. Commun., Vol 282, pp.1496-1500, 2009.
[35] T. Shirai, “Liquid-crystal adaptive optics based on feedback interferometry for high-resolution retinal imaging ”, Appl. Optics, Vol 4, pp.4013-4023 2002.
[36] Y.K. Fuh, K.C. Hsu, M.X. Lin and J.R. Fan, “Adjustable fluidic lenses for correcting piston/defocus/astigmatism aberrations induced by mems deformable mirrors ”, Microw. Opt. Technol. Lett., Vol 54, pp. 1701-1705 2012.
[37] Y.K. Fuh, K.C. Hsu, M.X. Lin and J.R. Fan, “Characterization of adjustable fluidic lenses and capability for aberration correction of defocus and astimatism ”, Optik-Int. J. Light Electron Opt. 2012. doi:10.1016/j.ijleo.2012.01.019.
[38] Y.K. Fuh, K.C. Hsu and J.R. Fan, “Roughness measurement of metals using a modified binary speckle image and adaptive optics ”, Opt. Lasers Eng., Vol 50, pp.312-316, 2012.
[39] Y.K. Fuh, K.C. Hsu and J.R. Fan,“Rapid in-process measurement of surface roughness using adaptive optics ”, Opt. Lett., Vol 37, pp. 848-50, 2012.
[40] Thorlabs,“Adaptive Optics 101: Overview, Tech Review, And Applications,” http://www.thorlabs.hk/images/TabImages/AO_101_White_Paper.pdf
[41] K.M. Hamson, “ Adaptive Optics and vision,” J. Mod. Optic, Vol 55, pp. 3425-3467, 2008.
[42] Thorlabs,“Adaptive Optics Kit User guide ”, http://www.thorlabs.com/Thorcat/18100/18182-D02.pdf
[43] J. Schroers and N. Paton, “Amorphous metal alloys form like plastics ”, Adv. Mater. Process. Vol 164, pp.61–63, 2006.
[44] J. Schroers, G. Kumar, T. M. Hodges, S. Chan and T. R. Kyriakides, “Bulk metallic glasses for biomedical applications ”, JOM, Vol 61, pp. 21-29 2009.
[45] L. Huang, Z. Cao, H.M. Meyer, P.K. Liaw, E. Garlea, J.R. Dunlap, T. Zhang and W. He, “Responses of bone-forming cells on pre-immersed Zr-based bulk metallic glasses: Effects of composition and roughness ” , Acta Biomater., Vol 7, pp. 395–405, 2011.
[46] M. Ball, DM. Grant, WJ. Lo and CA. Scotchford, “The effect of different surface morphology and roughness on osteoblast-like cells ” , J Biomed Mater Res A, Vol 86, pp. 637–47, 2008.
[47] D.D. Deligianni, N. Katsala, S. Ladas, D. Sotiropoulou, J. Amedee and YF. Missirlis, “Effect of surface roughness of the titanium alloy Ti-6Al-4V on human bone marrow cell response and on protein adsorption ” , Biomaterials, Vol 22, pp. 1241–1251, 2001.
[48] K. Anselme, M. Bigerelle, “Statistical demonstration of the relative effect of surface chemistry and roughness on human osteoblast short-term adhesion ” , J Mater Sci: Mater Med, Vol 17, pp.471–479, 2006.
[49] H.Y. Kim, Y.F. Shen and J.H. Ahn, “Development of a surface roughness measurement system using reflected laser beam ” , J Mater Process Technol Vol 130-131, pp. 662–667, 2002.
[50] S.A. Coker and Y.C. Shin, “In-process control of surface roughness due to tool wear using a new ultrasonic system ”, Int. J. Mach. Tools Manuf. Vol 36, pp.411-22, 1996.
[51] L.Cheng and G.G. Siu, “Measurement of surface roughness with core-ring ratio method using incoherent light ”, Meas. Sci. Technol, Vol 1, pp.759-784, 1990.
[52] R.S. Lu and G.Y. Tian, “On-line measurement of surface roughness by laser light scattering ”, Meas. Sci. Technol, Vol 17, pp.1496-1502, 2006.
[53] G. Gobi, A.B. Ganesh, T.K.Radhakrishnan and D.Sastikumar, “An optical approach to estimate the surface roughness of metals ”, J. Am.Sci., Vol 3, pp.49-53, 2007.
[54] Y.Gao, “Use of fluid beams to estimate a clean zone for in-process optical measurement ”, Proc ASPE Am Soc Precis Eng USA, Vol 1, pp.329-332, 2001.
[55] Y.Gao and Z.Tao, “Test of flow patterns of grinding coolant interfered using an injection of stream ”, Proc. Euspen Conf. 684-687, 2001.
[56] R. Guo and Z. Tao, “The modified Beckmann-Kirchhoff scattering theory for surface characteristics in-process measurement ”, Opt. Lasers Eng., Vol 47, pp.1205-1211, 2009.
[57] R. Guo and Z. Tao, “Experimental investigation of a modified Beckmann-Kirchhoff scattering theory for the in-process optical measurement of surface quality ”, Optik , Vol 122, pp.1890-1894, 2011.
[58] R. Guo and Z. Tao, “Experimental investigation of the characteristics of a laser beam passing through a fluid layer for surface quality in-process measurement ”, Meas. Sci. Technol., Vol 21, 075306 (7pp) , 2010.
[59] Y. Gau, X. Huang and Y. Zhang, “An in-process form error measurement system for precision machining ”, Meas. Sci. Technol., Vol 21, 054001(8pp), 2010.
[60] 葉玉堂、饒建珍、肖峻,幾何光學,五南圖書,台北市,民國九十七年。
|