鋁合金薄片吹氣成型製造手機外殼之研究

以作者查詢圖書館館藏

、以作者查詢臺灣博碩士

、以作者查詢全國書目

、勘誤回報

、線上人數：34

、訪客IP：3.133.148.119

姓名

蕭家良(Chia-liang Hsiao) 查詢紙本館藏

畢業系所

機械工程學系在職專班

論文名稱

鋁合金薄片吹氣成型製造手機外殼之研究
(The research of blow forming of aluminum alloy sheet for cell phone case)

相關論文

★ 使用實驗計劃法求得印刷電路板微鑽針最佳鑽孔參數	★ 滾針軸承保持架用材料之電鍍氫脆研究
★ 強制氧化及熱機處理對鎂合金AZ91D固相回收製程之研究	★ 滾針軸承保持架圓角修正之有限元素分析
★ 透過乾式蝕刻製作新型鍺全包覆式閘極電晶體元件	★ 窗型球柵陣列構裝翹曲及熱應力分析
★ 冷軋延對ZK60擠製材的拉伸與疲勞性質之影響	★ 熱引伸輔助超塑成形製作機翼整流罩之設計及分析
★ 超塑性鋁合金5083用於機翼前緣整流罩之研究	★ 輕合金輪圈疲勞測試與分析
★ 滾針軸承保持架之有限元分析	★ 鎂合金之晶粒細化與超塑性研究
★ 平板式固態氧化物燃料電池穩態熱應力分析	★ 固態氧化物燃料電池連接板電漿鍍膜特性研究
★ 7XXX系鋁合金添加Sc之顯微組織與機械性質研究	★ 高延性鎂合金之特性及成形性研究

檔案

[Endnote RIS 格式]

[Bibtex 格式]

[相關文章]

[文章引用]

[完整記錄]

[館藏目錄]

[檢視]

[下載]

本電子論文使用權限為同意立即開放。
已達開放權限電子全文僅授權使用者為學術研究之目的，進行個人非營利性質之檢索、閱讀、列印。
請遵守中華民國著作權法之相關規定，切勿任意重製、散佈、改作、轉貼、播送，以免觸法。

摘要(中)

本研究採用鋁合金AA5083 H18薄板材針對手機產品的金屬外殼進行吹氣成形，利用超塑成形熱壓機吹製一類似手機外殼的長方形開口盒，近年來由於3C產品的趨勢偏向輕、薄、短、小與其多變性，故本研究目標針對吹氣成型製程應用在手機產品上外，尚須達到成型速度快，成品外觀的小R角與微細表面的外觀需求。因此，本研究先以現有自製的模具墊塊做實驗，將成型條件分為兩組，一組為固定成型溫度，變更成型壓力與時間，另一組為固定成型壓力與時間，變更成型溫度，藉此找出成型溫度、成形壓力、成型時間與外觀R角表面微細紋路間的關係後，最後再以委託廠商製做有表面微細紋路造型的墊塊，配合調整後的參數實作並分析其成品成型性。

摘要(英)

In this study, we applied the blow molding process with the aluminum alloy AA5083 H18 material for the metal case of the cell phone products. Firstly, we use the superplastic forming machine to blow the rectangular opening box that similar to cell phone case. In recent years the trend of 3C products tend to be light, thin, short, small and variability, so It is the objective of this study the blow molding process applications on the mobile phone products, And it would need to achieve fast blow molding, small radius on the outline edge of the mobile phone products and 3D pattern appearance of the mobile phone product surface. Therefore, this study was started to experiment with the existing tooling hand-made plate. Firstly, the molding conditions are divided into two groups. One of group was fixed-forming temperature with the different molding pressure and time. Another group was fixed molding pressure and time with the different molding temperature. Base on the datum of the two groups to find out the relation by forming temperature, forming pressure, forming time, the radius of the outline surface and the fine line of the outline surface. Finally to apply the adjusted-forming condition we find with the vendor’s tooling plate to blow the finished product with fine line on the surface.

關鍵字(中)

★ 吹氣成形
★ 手機外殼
★ 鋁合金AA5083 H18

關鍵字(英)

★ AA5083 H18
★ Cell phone case
★ Blow forming

論文目次

摘要 ................................ ................................ ................................ .......... i
Abstract ................................ ................................ ................................ ......... ii
致謝 ................................ ................................ ................................ ........ iv
目錄 ................................ ................................ ................................ ......... v
圖目錄 ................................ ................................ ................................ ........ viii
表目錄 ................................ ................................ ................................ ........ xiv
符號說明 ................................ ................................ ................................ .... xvi
第一章緒論 ................................ ................................ ................................ . 1
1-1 前言 ................................ ................................ ................................ 1
1-2 5083鋁合金的特性簡介 [1] ................................ ........................... 2
1-3 超塑成形概論 ................................ ................................ ............... 3
1-4 一般超塑成形製程 ................................ ................................ ....... 5
1-5 超塑成形的特性 ................................ ................................ ........... 7
1-6 研究目標 ................................ ................................ ....................... 8
第二章基本原理 ................................ ................................ ....................... 12
2-1 超塑成形組方程式 ................................ ................................ . 12
2-2 超塑成形理論 ................................ ................................ ............. 13
2-3 空孔形成機制 ................................ ................................ ............. 15
2-4 鋁合金材料的命名規範 ................................ ............................. 18
第三章實驗配置與步驟 ................................ ................................ ........... 25
3-1 實驗材料 ................................ ................................ ..................... 25
3-2 實驗設備 ................................ ................................ ..................... 25
3-3 吹氣成型模具設計 ................................ ................................ ..... 27
3-3-1 吹氣成形模具材料 ................................ .......................... 27
3-3-2 吹氣成型模具設計 ................................ .......................... 27
3-3-3 吹氣成型模具設計注意事項 ................................ .......... 34
3-4實驗步驟實驗步驟 ................................ ................................ ....................... 35
第四章實驗結果與討論 ................................ ................................ ........... 36
4-1 手機外殼之吹氣成形實驗結果 ................................ ................. 36
4-2 手機外殼成型之觀最小 R角分析 ................................ ......... 60
4-2-1 外觀 R角與成型溫度間的關係 ................................ ..... 60
4-2-2 外觀 R角、成型壓力與時間的關係 ..................... 61
4-3 手機外殼成型之厚度分析 ................................ ......................... 71
4-3-1 厚度分佈與成型溫間的關係 ................................ ...... 71
4-3-2 厚度分佈、成型壓力與時間的關係 ...................... 73
4-4 手機外殼成型之空孔分析 ................................ ......................... 77
4-4-1 空孔分佈與成型溫度間的關係 ................................ ...... 78
4-4-2 空孔分佈與成型壓力間的關係 ................................ ...... 78
4-5 手機外殼成型之觀表面微細紋路實驗結果 ....................... 104
第五章結論 ................................ ................................ ............................. 107
參考文獻 ................................ ................................ ................................ ... 109

參考文獻

[1]A. K. Vasudevan and R. D. Doherty, Aluminum alloys-contemporary research and applications vol. 31: Boston : Academic Press, 1989.
[2]張吉本, "超塑性合金之特性及其應用," 中華民國鍛造協會會刊, vol. 11, pp. 6-21, 2002.
[3]J. W. E. K. N. Melton and C. P. Cutler, "Progress International Materials Science," vol. 21, pp. 61-158, 1976.
[4]A. K. Ghosh, C. H. Hamiton, and J.A.Wert, "Metals Form," vol. 8, pp. 172-190, 1985.
[5]A. K. Ghosh and C. H. Hamiton, Superplastic Forming and Diffusion Bonding: SPF/DB workshop Taipei, 1990.
[6]C. H. Hamiton, NATO/AGARD Lecture Series: Superplasticity, 1989.
[7]C. H. Hamilton, "Method for superplastic forming," 1982.
[8]S. Kalpakjian and S. Schmid, Manufacturing Processes for Engineering Materials.
[9]Y. Luo, S. G. Luckey, P. A. Friedman, and Y. Peng, "Development of an advanced superplastic forming process utilizing a mechanical pre-forming operation," International Journal of Machine Tools and Manufacture, vol. 48, pp. 1509-1518, 2008.
[10]R. Verma, A. K. Ghosh, S. Kim, and C. Kim, "Grain-Refinement and Superplasticity in 5083-Al," Materials Science and Engineering a-Structural Materials Properties Microstructure and Processing, vol. 191, pp. 143-150, Feb 1 1995.
[11]張書省, "超塑性鋁合金5083 快速成形研究," 國立中央大學機械工程研究所, 2000.
[12]G. E. Dieter, Mechanical Metallurgy: University of Mary-land.
[13]A. K. Ghosh and C. H. Hamilton, Superplastic Forming of a Long Rectangular Box Section-Analysis and Experiment: Rockwell International Thousand Oads California, 1979.
[14]J. Xinggang, C. Jianzhonh, and M. Longxiang, An Experimental Study of Cavity Nucleation During Superplastic Deformation vol.196: Material Research Society, 1990.
[15]H.-y. Wu, J.-y. Perng, S.-h. Shis, C.-h. Chiu, S. Lee, and J.-y. Wang, "Cavitation characteristics of a superplastic 5083 Al alloy during gas blow forming," Journal of Materials Science, vol. 41, pp. 7446-7453, 2006.
[16]劉亞倫, "超塑性鋁合金 5083 快速成形之空孔與金相組織研究," 國立中央大學機械工程研究所, 2001.
[17]台暉鋁業股份有限公司. http://www.taiwell.com.tw/aluminium1.htm
[18]R. Verma, P. Friedman, A. Ghosh, C. Kim, and S. Kim, "Superplastic forming characteristics of fine-grained 5083 aluminum," Journal of Materials Engineering and Performance, vol. 4, pp. 543-550, 1995.
[19]林志倫, "超塑性 5083 鋁合金背壓狀態之快速率成形分析," 國立中央大學機械工程研究所, 2000.
[20]張暘青, "民航客機機翼前緣整流罩之超塑成形材料研究," 國立中央大學機械工程研究所, 2011.

指導教授

李雄(Shyong Lee)

審核日期

2012-7-16

推文