參考文獻 |
1. http://www.ledinside.com.tw/global_f_f_200901 ,LEDinside 全球白熾燈禁用時間表(2009).
2.經濟部技術處 產業技術白皮書(2011).
3. M. B‥urmen, F. Pernuš and B. Likar, “LED light sources: a survey of quality-affecting factors and methods for their assessment,” Meas. Sci. Technol.,19, 122002 (2008).
4. H. J. Round, “A note on carborundum,” Electrical World, 49, 309-310 (1907).
5. N. Holonyak and S. F. Bevacqua, “Coherent (visible) light emission from
Ga(As1-xPx) junctions,” Appl. Phys. Lett., 1, 82-83 (1962).
6. A. Zukauskas, M. S. Shur, and R. Caska, Introduction to Solid-state Lighting(John Wiley & Sons, New York, 2002).
7. H. Amano, N. Sawaki, I. Akasaki, and T. Toyoda, “Metal organic vapor phase epitaxial growth of a high quality GaN film using an AlN buffer layer,” Appl.Phys. Lett., 48, 353-355 (1986).
8. http://wp168.wordpress.com/2009/02/04/nichias-leds-hit-249-lmw
9. http://www.ledinside.com.tw/cree_254lm_per_w_201204
10. N. Narendran, Y. Gu, J. P. Freyssinier, H. Yu, L. Deng, “Solid-state lighting:failure analysis of white LEDs,” J. Cryst. Growth, 268, 449 (2004).
11. Philipslumileds, Luxeon Emitter Technical Datasheet
12. Philips White Paper“Understanding Power LED Lifetime Analysis”
13. L. Bechou, O. Rehioui, Y. Deshayes, O. Gilard, G.Quadri, Y. Ousten, “Measurement of the thermal characteristic of packages double-heterostructure lighe emitting diodes for space applications using spontaneous optical spectrum properties,” Opt. Laser Technol., 40, 589 (2008).
14. S. C. Yang, P. Lin , C. P. Wang, S. B. Huang, C. L.Chen, P. F. Chiang, A. T. Lee,M. T. Chu , “Failure and degradation mechanisms of high-power white light emitting diodes,” Microelectronics Reliability , 50, 959 (2010).
15. R. H. Horng,C. C. Chiang,Y. L. Tsai,C. P. Lin,K. Kan,H. I. Lin,andD. S. Wuu, “Thermal Management Design from Chip to Package for High Power InGaN/Sapphire LED Applications, ” Electrochem. Solid State Lett. ,12, H222(2009).
16. G. J. Sheu, F. S. Hwu, S. H. Tu, W. T. Chen, J. Y.Chang, and J. C. Chen, “The heat dissipation performance of LED applied a MHP,” Proc. SPIE ,5941,594113,(2005).
17. F. S. Hwu, G. J. Sheu, and J. C. Chen, “Thermal modeling and performance of LED packaging for illuminating device,” Proc. SPIE , 6337, 63371J (2006).
18. Y. C. Lee, J. C. Chen, F. S. Hwu, G. J. Sheu, W. D.Chen, and J. Y. Chang, “Passive heat dissipation devices for high power LEDs,” Proc. of the Eighth Chinese Optoelectronics Symposium (2006).
19. 許國君、陳志臣、胡凡勳、鄭健宏,“新世代照明技術:LED元件封裝之熱管
理分析,”光學工程 第九十期,69 (2005)。
20. X. Guo and E. F. Schubert, “Current crowding in GaN/InGaN light emitting diodes on insulating substrates,” J. Appl. Phys., 90, 4191 (2001).
21. H. Kim, J. M. Lee, C. Huh, S. W. Kim, D. J. Kim, S. J. Park, and H. Hwang, “Lateral current transport path, a model for GaN-based light-emitting diodes:Applications to practical device designs, ” Appl. Phys. Lett., 77, 1903 (2000).
22. H. Kim, S. J. Park, and H. Hwang, “Effects of current spreading on the performance of GaN-based light-emitting diodes,” IEEE Trans. Electron Devices,48, 1065 (2001).
23. H. Kim, S. J. Park, and H. Hwang, “Design and fabrication of highly efficient GaN-based light-emitting diodes,” IEEE Trans. Electron Devices , 49, 1715 (2002).
24. H. Kim, K. K. Kim, K. K. Choi, H. Kim, J. O Song, J. Cho, K. H. Baik, C. Sone, and Y. Park, and T. Y. Seong, “Design of high-efficiency GaN-based light emitting diodes with vertical injection geometry,” Appl. Phys. Lett., 91, 023510-1 (2007).
25. X. Guo, Y. L. Li, and E. F. Schubert, “Efficiency of GaN/InGaN light-emitting diodes with interdigitated mesa geometry,” Appl. Phys. Lett., 79, 1936 (2001).
26. J. S. Yun, S. M. Hwang, and J. I. Shim, “Current spreading analysis in vertical electrode GaN-based blue LEDs,” Proc. SPIE , 6841, 68408 (2007).
27. H. Kim, S. J. Park, and H. Hwang, “Lateral current transport path, a model for GaN-based light-emitting diodes: Applications to practical device designs,” Appl Phys Lett., 81, 1326 (2002).
28. C. Huh, J. M. Lee, D. J. Kim, and S. J. Park, “Improvement in light-output efficiency of InGaN/GaN multiple-quantum well light-emitting diodes by current
blocking layer,” J. Appl. Phys., 92, 2248 (2002).
29. G. J. Sheu, F. S. Hwu, J. C. Chen, J. K. Sheu, and W. C. Lai, “Effect of the Electrode Pattern on Current Spreading and Driving Voltage in a GaN Sapphire LED Chip,” J. Electrochem. Soc., 155, H836 (2008).
30. J. C. Chen, G. J. Sheu, F. S. Hwu, H. I. Chen, J. K. Sheu, T. X. Lee, and C. C. Sun, “Electrical-optical analysis of a GaN sapphire LED chip by considering the resistivity of the current-spreading layer,” Opt. Rev., 16, 213 (2009).
31. S. Hwang and J. Shim, “A Method for Current Spreading Analysis and Electrode Pattern Design in Light-Emitting Diodes,” IEEE Trans. Electron Devices, 55, 1123 (2008).
32. H. Kim, J. Cho, J. W. Lee, S. Yoon, H. Kim, C. Sone, Y. Park, and T. Y. Seong, “Consideration of the Actual Current-Spreading Length of GaN-Based Light-Emitting Diodes for High-Efficiency Design,” IEEE J. Quantum Electron.,43, 625 (2007).
33. S. J. Wang, K. M. Uang, S. L. Chen, Y. C. Yang, S. C. Chang, T. M. Chen, and C. H. Chen, “Use of patterned laser liftoff process and electroplating nickel layer for the fabrication of vertical-structured GaN-based light-emitting diodes,” Appl. Phys. Lett., 87, 011111-1 (2005).
34. J. T. Chu, C. C. Kao, H. W. Huang, W. D. Liang, C. F. Chu, T. C. Lu, H. C. Kuo, and S. C. Wang, “Effects of Different n-Electrode Patterns on Optical Characteristics of Large-Area p-Side-Down InGaN Light-Emitting Diodes Fabricated by Laser Lift-Off,” Jpn. J. Appl. Phys., 44, 7910 (2005).
35. W. B. Joyce and S. H. Wemple “Steady-state junction-current distributions in thin resistive films on semiconductor junctions, ”J. Appl. Phys. 41, 3818 (1970)
36. G. H. B. Thompson, Physics of Semiconductor Laser Devices (John Wiley and Sons, New York, 1980)
37. E. F. Schubert, Light-Emitting Diodes, 2nd ed., Cambridge University Press,Cambridge, England, (2006).
38. A. Chakraborty, L. Shen, H. Masui, S. P. DenBaars, and U. K. Mishra, “ Interdigitated multipixel arrays for the fabrication of high-power light- emitting diodes with very low series resistance, ”Appl. Phys. Lett., 88, 181120 -1 (2006).
39. M. V. Bogdanov, K. A. Bulashevich, I. Y. Evstratov, A. I. Zhmakin, and S. Y. Karpov, “Coupled modeling of current spreading, thermal effects and light extraction in III-nitride light-emitting diodes,” Semicond. Sci. Technol., 23, 125023 (2008).
40. F. S. Hwu ,J. C. Chen,J, S. H. Tu,G. J. Sheu,H. I. Chen ,and J. K. Sheud, “A Numerical Study of Thermal and Electrical Effects in a Vertical LED Chip ,” J.
Electrochem. Soc., 157, H31-H37 (2010)
41. J. P. Ao, H. Sato, T. Mizobuchi , K. Morioka, S. Kawano, Y. Muramoto, Y. B. Lee, D. Sato, Y. Ohno, and S. Sakai, “Monolithic Blue LED Series Arrays for High-Voltage AC Operation,” Phys. Stat. Sol. (a), 194, 376 (2002).
42. 王為,LED技術成熟-應用市場蓄勢待發,工業技術與資訊,173,3 (2006)。
43. H. H. Yen, W. Y. Yeh, and H. C. Kuo, “GaN alternating current light-emitting device,” Phys. Stat. Sol. (a) , 204, 2077 (2007).
44. H. H. Yen, H. C. Kuo, and W. Y. Yen, “Characteristics of single-chip GaN-based alternating current light-emitting diode, ” J. J. Appl. Phys., 47, 8808 (2008).
45. G. A. Onushkin, Y. J. Lee, J. J. Yang, H. K. Kim, J. K. Son, G. H. Park, and Y. J. Park, “Efficient Alternating Current Operated White Light-Emitting Diode Chip,”
IEEE Photonic. Tech. Lett., 21, 33 (2009).
46. W. W. Yeh, H. H. Yen, Y. J. Chan, “ The development of monolithic alternating current light-emitting diode,” Proc. of SPIE, 7939, 793910-4 (2010).
47. F. S. Hwu, C. H. Yang and J C Chen, “Method for measuring the mean junction temperature of alternating current light-emitting diodes,” Meas. Sci. Technol., 22
, 045701 (2011)
|