參考文獻 |
[1] 黃振賢,機械材料,文京圖書股份有限公司,新竹,民國69年
[2] K. I. Hirano , R. P. Agarwala , M. Cohen,“Diffusion of iron, nickel and cobalt in aluminum”,Acta Metallurgica , Vol 10, pp.857-863,1962
[3] American Society for Metals, Metals Handbook Committee and T. Lyman (Eds), Metals handbook:Metallography, Structures and Phase Diagrams, 8th edition, American Society for Metals,1973
[4] M. Chemingui , M. Khitouni , K. Jozwiak ,G. Mesmacque , A. Kolsi,“Characterization of the mechanical properties changes in an Al–Zn–Mg alloy after a two-step ageing treatment at 70 oCand 135 oC”,Materials and Design , Vol 31, pp.3134-3139,2010
[5] S. K. Panigrahi , R. Jayaganthan,“Development of ultrafine grained high strength age hardenable Al 7075 alloy by cryorolling”,Materials and Design , Vol 32, pp.3150-3160,2011
[6] Y. H. Zhao , X. Z. Liao , Z. Jin , R. Z. Valiev , Y. T. Zhu,“Microstructures and mechanical properties of ultrafine grained 7075 Al alloy processed by ECAP and their evolutions during annealing”,Acta Materialia , Vol 52 , pp.4589-4599,2004
[7] 楊智綱,「高強度航空用7000系鋁合金機械性質、抗應力腐蝕破壞性及焊接熱影響區特性之研究」,國立中央大學,博士論文,桃園,民國90年
[8] R. Jayaganthan , S. K. Panigrahi,“Effect of Cryorolling strain on Precipitation Kinetics of Al 7075 Alloy”,Materials Science forum, Vol 584-586, pp.911-916,2008
[9] P. N. Adler , R. Delasi , G. Geschwind,“Influence of Microstructure on the Mechanical Properties and Stress Corrosion Susceptibility of 7075 Aluminum Alloy”,Metallurgical and Materials Transactions B , Vol 3, pp.3191-3200,1972
[10] J. C. Werenskiold , A. Deschamps , Y. Brechet,“Characterization and modeling of precipitation kinetics in an Al–Zn–Mg alloy”,Materials Science and Engineering A, Vol 293, pp.267–274,2000
[11] L. Hadjadj , R. Amira , D. Hamana , A. Mosbah,“Characterization of precipitation and phase transformations in Al–Zn–Mg alloy by the differential dilatometry”,Journal of Alloys and Compounds, Vol 462, pp.279–283,2008
[12] R. Ferragut , A. Somoza , A. Tolley , I. Torriani,“Precipitation kinetics in Al–Zn–Mg commercial alloys”,Journal of Materials Processing Technology, Vol 141, pp.35–40,2003
[13] J. J. Thompson , E. S. Tankins , V. S. Agarwala,“A heat treatment for reducing corrosion and stress corrosion cracking susceptibilities in 7xxxx aluminum alloy”,Materials Performance, Vol 26, pp.45-52,1987
[14] L. B. Ber,“Accelerated artificial ageing regimes of commercial aluminium alloys. II- Al–Cu, Al–Zn–Mg–(Cu), Al–Mg–Si–(Cu) alloys”,Materials Science and Engineering A, Vol 280, pp.91–96,2000
[15] J. K. Park,“Influence of Retrogression and Reaging Treatments on the Strength and Stress Corrosion Resistance of Aluminum Alloy 7075-T6”,Materials Science
and Engineering A , Vol 103, pp.223-231,1988
[16] D. Wang , D. R. Ni , Z. Y. Ma,“Effect of pre-Strain and two-step aging on microstructure and stress corrosion cracking of 7050 alloy”,Materials Science and Engineering A , Vol 494 , pp.360-366,2008
[17] W. Feng , X. Baiqing , Z. Yongan , L. Hongwei , L. Zhihui , L. Qiang,“Microstructure and mechanical properties of spray-deposited Al-Zn-Mg-Cu alloy processed through hot rolling and heat treatment”,Materials Science and Engineering A , Vol 518, pp.144-149,2009
[18] Y. H. Zhao , X. Z. Liao , S. Cheng , E. Ma , Y. T. Zhu,“ Simultaneously Increasing the Ductility and Strength of Nanostructured Alloys”,ADVANCED MATERIALS, Vol 18 , pp.2280-2283,2006
[19] J. Wloka , S. Virtanen,“Detection of nanoscale η-MgZn2 phase dissolution from an Al-Zn-Mg-Cu alloy by electrochemical microtransients”,Surface and Interface Analysis, Vol 40 , pp.1219-1225,2008
[20] 黃清添,「析出製成參數對AA7005鋁擠型合金機械性質與抗應力腐蝕性之影響」,國立台灣科技大學,碩士論文,民國91年
[21] K. Stiller , P. J. Warren , V. Hansen , J. Angenete , J. Gjønnes,“Investigation of precipitation in an Al–Zn–Mg alloy after two-step ageing treatment at 100 oC and 150 oC”,Metallurgical and materials transactions A, Vol.270 , pp.55-63,1999
[22] E. Salamci,“Ageing Behaviour of Spray Cast Al-Zn-Mg-Cu Alloys”,Turkish Journal of Engineering & Environmental Sciences, Vol.25 , pp.681-686,2001
[23] Z. W. Du , Z. M. Sun , B. L. Shao , T. T. Zhou , C.Q. Chen,“Quantitative evaluation of precipitates in an Al–Zn–Mg–Cu alloy after isothermal aging”,Materials Characterization, Vol.56 , pp.121-128,2006
[24] M. Lech-Grega , S. Hawrylkiewicz , M. Richert , W. Szymanski,“Structural parameters of 7020 alloy after heat treatment simulating the welding process”,Materials Characterization, Vol.46 , pp.251-257,2001
[25] I. Westermanna , O. S. Hopperstad , K. Marthinsen , B. Holmedal,“Ageing and work-hardening behaviour of a commercial AA7108 aluminium alloy”,Materials Science and Engineering A, Vol 524, pp.151-157,2009
[26] M. Dumont , W. Lefebvre , B. Doisneau-Cottignies , A. Deschamps,“ Characterisation of the composition and volume fraction of η′ and η precipitates in an Al–Zn–Mg alloy by a combination of atom probe, small-angle X-ray scattering and transmission electron microscopy”,Acta Materialia, Vol 59, pp.2881–2892,2005
[27] M. Nicolas , A. Deschamps,“Characterisation and modelling of precipitate evolution in an Al–Zn–Mg alloy during non-isothermal heat treatments”,Acta Materialia, Vol 51, pp.6077–6094,2003
[28] S. K. Panigrahi , R. Jayaganthan,“Effect of ageing on microstructure and mechanical properties of bulk, cryorolled, and room temperature rolled Al 7075 alloy”,Journal of Alloys and Compounds, Vol 509, pp.9609-9616,2011
[29] A. Fjeldly , A. Søreng , H. Jørgen Roven,“Strain localisation in solution heat treated Al–Zn–Mg alloys”,Materials Science and Engineering A, Vol 300, pp.165-170,2001
[30] H.Masuda , F. Hasegwa , S. Ono,“Self-Ordering of Cell Arrangement of Anodic Porous Alumina Formed in Sulfuric Acid Solution”,Journal of The Electrochemical Society, Vol.144, pp.L127-L130,1997
[31] G. E. Thompson,“Porous anodic alumina: fabrication, characterization and applications”,Thin Solid Films, Vol.297, pp.192-201,1997
[32] O. Jessensky , F. Muller , U. Gosele,“Self-organized formation of hexagonal pore arrays in anodic alumina”,Appiled Physics Letters, Vol.72, pp.1173-1175,1998
[33] T. S. Shih , P. S. Wei,“Monitoring the progressive development of an anodized film on aluminum”,Journal of the Electrochemical Society, Vol.154, pp.678-683,2007
[34] I. Farnan , R. Dupree , A. J. Forty , Y. S. Jeong , G. E. Thompson , G. C. Wood,“Structural information about amorphous anodic alumina from 27Al MAS NMR”,Philosophical Magazine Letters, Vol.59, pp.189-195,1989
[35] T. P. Hoar , J. Yahalom,“The initiation of pores in anodic oxide films formed on aluminum in acid solutions”,Journal of the Electrochemical Society, Vol.110, pp.614-621,1963
[36] G. C. Wood , J. P. O’Sullivan,“The Anodizing of Aluminium in Sulphate Solutions”,Electrochimica Acta, Vol.15, pp.1865-1876,1970.
[37] Y. S. Kim , S. I. Pyun , S. M. Moon , J. D. Kim,“The effects of Applied Potential and pH on The Electrochemical Dissolution of Barrier Layer in Porous Anodic Oxide Film on Pure Aluminum”,Corrosion Science, Vol.38, pp.329-336,1996
[38] T. S. Shih , P. S. Wei , Y. S. Yung,“Optical properties of anodic aluminum oxide films on Al1050 alloys”,Surface & Coatings Technology, Vol.202, pp.3298-3305,2008
[39] W. Lee , R. Ji , U. Gosele , K. Nielsch,“Fast fabrication of long-range ordered porous alumina membranes by hard anodization”, nature materials,Vol.5, pp.741-747,2006
[40] K. Nielsch , J. Choi , K. Schwirn , R. B. Wehrspohn , U. Gosele,“Self-ordering regimes of porous alumina: The 10% porosity rule”,Nano Letters,Vol.2, pp.677-680,2002
[41] S. Ono , M. Saito , M. Ishiguro , H. Asoh,“Controlling Factor of Self-Ordering of Anodic Porous Alumina”,Journal of The Electrochemical Society, Vol. 151, pp.473-478,2004
[42] Y Li , Z. Y. Ling , S. S. Chen , J. C. Wang,“Fabrication of novel porous anodic alumina membranes by two-step hard anodization”,Nanotechnology, Vol. 19,pp.225604-225609, 2008
[43] A. K. Mukhopadhyay,“On the Nature of the Fe-Bearing Particles Influencing Hard Anodizing Behavior of AA7075 Extrusion Products”,Metallurgical and materials transactions A, Vol. 29A, pp.979-987,1998
[44] R. Tilley,Colour and the optical properties of materials,WILEY,1999
[45] S. Van Gils , P. Mast , E. Stijns , H. Terryn,“Colour properties of barrier anodic oxide films on aluminium and titanium studied with total reflectance and spectroscopic ellipsometry”,Surface & Coatings Technology ,Vol. 185 ,pp.303–310,2004
[46] S.Wernick , R. Pinner , P. G. Sheasby, The surface treatment and finishing of aluminum and its alloys,Finishing Publication Ltd. ,England, 1987
[47] Y. Zuo , P. H. Zhao , J. M. Zhao,“The influences of sealing methods on corrosion behavior of anodized aluminum alloys in NaCl solutions”,Surface and Coatings Technology ,Vol. 166 , pp.237–242,2003
[48] V. Lopez , M. J. Bartolome , E. Escudero , E. Otero , J. A. Gonzalez,“Comparison by SEM, TEM, and EIS of hydrothermally sealed and cold sealed aluminum anodic oxides”,Journal of the Electrochemical Society, Vol 153, pp.75-82,2006
[49] 劉志維,「鋁鎂合金陽極處理技術之研發」,國立中央大學,碩士,民國91年
[50] O. J. Murphy , J. S. Wainright , J. J. Lenczewski , J. H. Gibson , M. W. Santana,“Spectroscopic Investigations of Porous and Sealed Anodic Alumina Films”,Journal of the Electrochemical Society Vol 136 , pp.3518-3525,1989
[51] 柯賢文,腐蝕及其防制,全華科技圖書出版社,民國87年
[52] J. J. Ren , Y. Zuo,“The growth mechanism of pits in NaCl solution under anodic films on aluminum”,Surface and Coatings Technology, Vol 191, pp.311-316,2005
[53] V. Moutarlier , M. P. Gigandet , J. Pagetti,“Characterisation of pitting corrosion in sealed anodic films formed in sulphuric,sulphuric/molybdate and chromic media”,Applied Surface Science ,Vol 206, pp.237-249,2003
[54] N. Voevodin , C. Jeffcoate , L. Simon , M. Khobaib , M. Donley,“Characterization of pitting corrosion in bare and sol–gel coated aluminum 2024-T3 alloy”,Surface and Coatings Technology, Vol 140, pp.29-34,2001
[55] S. Feliu Jr. , Ma. J. Bartolomé , J. A. González , S. Feliu,“XPS Characterization of Porous and Sealed Anodic Films on Aluminum Alloys”,Journal of The Electrochemical Society, Vol.154, pp.C241-C248,2007
[56] J. F. Moulder , W. F. Stickle , P. E. Sobol , K. D. Bomben(Eds.) , Handbook of X Ray Photoelectron Spectroscopy, Physical Electronics, 1995-02-01
[57] W. F. Gale and T. C. Totemeier(Eds) , Smithells Metals Reference Book, 8th edition, Butterworth-Heinemann, Oxford,2004
[58] M. Chemingui , M. khitouni , G. Mesmacque , A. W. Kolsi,“Effect of heat treatment on plasticity of Al-Zn-Mg alloy:Microstructure evolution and mechanical properties”,Physics Procedia , Vol 2, pp.1167-1174,2009
[59] K. G. Krishna , K. Sivaprasad , K. Venkateswarluc , K. C. Hari Kumar,“Microstructural evolution and aging behavior of cryorolled Al–4Zn–2Mg alloy”,Materials Science and Engineering A, Vol 535, pp.129-135,2012
[60] T. S. Shih , P. C. Chen , Y. S. Huang,“Effects of the hydrogen content on the development of anodic aluminum oxide film on pure aluminum”,Thin Solid Films, Vol 519, pp.7817-7825,2011
[61] S. Feliu Jr. , J. A. Gonzalez , V. Lopez , M. J. Bartolome , E. Escudero , E. Otero,“Characterisation of porous and barrier layers of anodic oxides on different aluminium alloys”,Journal of Applied Electrochemistry, Vol 37, pp.1027-1037,2007
[62] C. M. Abreu , M. J. Cristobal , R. Figueroa , G. Pena , M. C. Perez,“An XPS study on the influence of nitrogen implantation on the passive layers developed on different tempers of AA7075 aluminum alloy”,Surface and Interface Analysis, Vol 42, pp.592-596,2010
[63] M. Saenz de Miera , M. Curioni , P. Skeldon , G. E. Thompson,“The behaviour of second phase particles during anodizing of aluminium alloys”,Corrosion Science, Vol. 52 , pp.2489–2497,2010
[64] H. Habazaki , X. Zhou , K. Shimizu , P. Skeldon , G. E. Thompson , G.C. Wood,“Incorporation and mobility of zinc ions in anodic alumina films”,Thin Solid Films, Vol. 292 , pp.150–155,1997
[65] G. E. Thomson , P. Skeldon , G. C. Wood , X. Zhou , U. Kressig , E. Wieser , H. Habazaki , K. Shimizu,“Elastic Recoil Detection Analysis (ERDA), RBS and TEM Study of Barrier Film Formation on Al-4.5 at.% Mg-0.05 at.% Cu Alloy”,Surface and Interface Analysis , Vol. 27 , pp.57–62,1999
[66] Y. Liu , M. A. Arenas , P. Skeldon , G. E. Thompson , P. Bailey , T. C. Q. Noakes , H. Habazaki , K. Shimizu,“Anodic behaviour of a model second phase: Al–20at.%Mg–20at.%Cu”,Corrosion Science, Vol. 48 , pp.1225–1248,2006
[67] N. Birbilis , R. G. Buchheit,“Electrochemical Characteristics of Intermetallic Phases in Aluminum Alloys”,Journal of The Electrochemical Society, Vol. 152 , pp.B140–B151,2005
[68] K. Mansouri , K. Ibrik , N. Bensalah , A. Abdel-Wahab,“Anodic Dissolution of Pure Aluminum during Electrocoagulation Process: Influence of Supporting Electrolyte, Initial pH, and Current Density”,Industrial & Engineering Chemistry Research, Vol. 50 , pp.13362–13372,2011
[69] N. Tabrizian , H. N. Hansen , P. E. Hansen , R. Ambat , P. Moller,“Influence of annealing and deformation on optical properties of ultra precision diamond turned and anodized 6060 aluminium alloy”,Surface & Coatings Technology, Vol. 204, pp.2632–2638,2010
[70] 李正中,薄膜光學與鍍膜技術,藝軒圖書出版社,台北,民國95年
[71] J. Wang , C. W. Wang , Y. Li , W. M. Liu,“Optical constants of anodic aluminum oxide films formed in oxalic acid solution”,Thin Solid Films, Vol. 516, pp.7689–7694,2008
|