參考文獻 |
1. F. H. Samuel, P. Quellet, A.M. SAMUEL, and H.W. DOTY, “Effect of Mg and Sr Additions on the Formation of Intermetallics in Al-6 Wt Pct Si-3.5 Wt Pct Cu-(0.45)to(0.8)Wt Pct Fe 319-Tpe Alloy”, Metallurgical and Materials Transactions A,,V29A, (1998) ,pp.2871-2884.
2. A. M. Samuel, J. Gauthier, F.H. Samuel,” Microstructural Aspsects of the Dissolution and Melting of Al2Cu Phase in Al-Si Alloys during Solution Heat Treatment” ,Metallurgical and Materials Transactions A:, V27A, (1996),pp.1785-1798.
3. Ned Tenekedjiev, Hasim Mulazimoglu, Bernard Closset,” Microstructures and Thermal Analysis of Strontium-Treated Al-Si alloys ”, American Foundrymen’s Society, Inc.,(1995), pp.23-76.
4. R. W. Bruner, “Metallurgy of Die Casting Alloys”, SDCE. Detroit. MI, (1976), pp.25.
5. F. H. Samuel and A. M. Samuel, “Effect of magnesium content on the ageing behaviour of water-chilled Al-Si-Cu-Mg-Fe-Mn(380) alloy castings”, Journal of Materials Science, V30, (1995),pp.2531-2510.
6. J. E. Gruzleski and B.M. Closset: ‘The treatment of liquid aluminum-silicon alloy’, Des Plaines, IL, American Foundry Society Inc.,(1990), p.18.
7. J. Man, Li. Jing, and S. G. Jie, ”The effects of Cu addition on the microstructure and thermal stability of an Al-Mg-Si alloy”, Journal of Alloys and Compounds, V304,(2007), pp. 146-150.
8. M. Zeren, ”Effect of copper and silicon content on mechanical properties in Al-Cu-Si-Mg alloys”, Journal of Materials Processing Technology, V169,(2005), pp. 292-298.
9. G. Wang, X. Bain, W. Wang and J. Zhang,” Influence of Cu and minor elements on solution treatment of Al-Si-Cu-Mg cast alloys”, Materials Letters, V57,(2003), pp. 4083-4087.
10. H. G. Kang, M. Kida, H.Miyahara, “Age-Hardening Characteristics of Al-Si-Cu-Base Cast Alloys”, AFS Transactions, V107,(1999), pp. 507-515.
11. L. Lasa, and J. M. Rodriguez-Ibabe, ”Wear behaviour of eutectic and hypereutectic Al-Si-Cu-Mg casting alloys tested against a composite brake pad”, Materials Science and Engineering A, V363,(2003), pp. 193-202.
12. 陳楷林“平面顯示器用鋁合金薄膜濺鍍靶材之發展”工業材料雜誌179期,(2001), pp.153-158.
13. 李秉璋,王正和“金屬反射膜材料簡介”工業材料雜誌168期,(2000), pp.125-130.
14. Hong Xiao“半導體製程技術導論”歐亞書局,(2001), p.432
15. D. K, B. Heiland, W. D.Nix, E. Arzt, M. D. Deal, J. D. Plummer,“Microstructure of thermal hillocks on blanket Al thin films”Thin Solid Films,V371,(2000),pp.278-282.
16. C. Kylner, and L.Mattsson,“Initial development of the lateral hillock distribution in optical quality Al thin films studied in real time”Thin solid films,V307,(1997),pp.169-177.
17. L. Mattsson, and Y. H. Le Page,“Real-time study of migration in Aluminum films by means of subangstrom-sensitive scattering and profiling methods”Thin solid films,V198,(1991),pp.149-156.
18. C. Kylner, and L.Mattsson,“Enhanced optical performance of aluminum films by copper inclusion”Thin solid films,V348,(1999), pp.222-226.
19. A. J. Learn,“Suppression of aluminum hillock growth by overlayers of silicon dioxide chemically-vapor-deposited at low temperature”, Journal of Vacuum Science and Technology B, V4,(1986),pp.774-776.
20. M. Zaborowski, and P.Dumania,“Kinetics of hillock growth in Al and Al-alloys”Microelectronic Engineering,V50,(2000),pp.301-309.
21. E. Iwamura, T.Ohnishi, K.Yoshikawa, and K.Itayama,“In situ scanning electron microscope observation of hillock and whisker growth on Al-Ta alloy films for interconnections of thin film transistor-liquid crystal displays” Journal of Vacuum Science and Technology,A12, (1994),pp.2922-2924.
22. T. Ohnishi, E. Iwamura, and K.Takagi,“Effects of Nd content in Al thin films on hillock formation” Journal of Vacuum Science and Technology, A15,(1997), pp.2339-2348.
23. T. Ohnishi, E. Iwamura, and K.Takagi,“Morphology of sputter deposited Al alloy films”Thin Solid Films,V340,(1999), pp.306-316.
24. V. G. Davydov, T. D. Tostove, V. V. Zakharov, Y. A. Filatov and V. I. Yelagin, “Scientific principle of making an alloying addition of scandium to aluminium alloys” Materials Science and Engineering A, V280, (2000),pp.30-36.
25. L. K. Lamikov and G. V. Samsonov, “Soviet Non-Ferrous Metals Res.”(USSR), V9,(1964), pp.79-82.
26. Z. Yin,Q. Pan,Y. Zhang and F. Jiang,“Effect of minor Sc and Zr on the microstructure and mechanical properties of Al-Mg based alloys” Materials Science and Engineering A,V280,(2000),pp.151-155.
27. V. Ocenasek and M. Slamova,“Resistance to recrystallization due to Sc and Zr addition to Al-Mg alloys”Mater Characterization,V47,(2001),pp.157-162.
28. J. E. Hatch,“ Aluminum properties and physical metallurgy”, ASM International, Metals Park, Ohio, (1984), pp. 351-377.
29. J. E. Hatch,“ Aluminum: properties and physical metallurgy”, ASM International, Metals Park, Ohio, (1984), pp. 320-350.
30. J. E. Gruzleski and B.M. Closset: ‘The treatment of liquid aluminum-silicon alloy’, Des Plaines, IL, American Foundry Society Inc.,(1990), p.13.
31. J. E. Gruzleski and B.M. Closset: ‘The treatment of liquid aluminum-silicon alloy ’, Des Plaines, IL, American Foundry Society Inc.,(1990),pp.14-15.
32. J. R. Davis & Associates,“ASM specialty handbook: aluminum and aluminum alloys”, ASM International Materials Park, Ohio, (1994), p.555.
33. J. E. Hatch,“Aluminum properties and physical metallurgy”, ASM International, Metal Park, Ohio(1984), pp. 346-347.
34. B. Closset and J. E. Gruzleski,“Structure and properties of hypoeutectic Al-Si-Mg alloys modified with pure strontium”, Metallurgical and Materials Transactions A, 13A (1982), pp. 945-951.
35. M. Shamsuzzoha, L. M. Hogan and J. T. Berry,“Effects of modifying agents on crystallography and growth of silicon phase in Al-Si casting alloys”, AFS Transactions,(1993), pp. 999-1005.
36. M. D. Hanna, S. Z. Lu and A. Hellawell,“Modification in aluminum-silicon system”, Metallurgical and Materials Transactions A, 15A (1984), pp. 459-469.
37. S. Khan and R. Elliot,“Effect of antimony on the growth kinetics of aluminum-silicon eutectic alloys”, Journal of Materials Science,V29 (1994), pp. 736-741.
38. A. I. Telli and S. E. Kisakurek: “Effect of antimony additions on the silicon spacing in directionally solidified Al-Si eutectics”, Scripta Materialia, V20, (1986), pp.1657-1660.
39. P. N. Crepeau, ”Effect of Iron in Al-Si Casting Alloys: A Critical Review”, AFS Transactions, V103, (1995), pp.361-365.
40. A. M. Samuel, F. H. Samuel ,”Observations on the /formation of β-Al5FeSi phase in 319 type Al-Si alloys”, Journal of Materials Science, V31, (1996),pp.5529-5539.
41. L. Wang ,”Iron-Bearing Compounds in Al-Si Diecasting Alloys : Morphology and Conditions Under Which They Form” , AFS Transactions, V107,(1999), pp.231-238.
42. P. S. Wang, S. L. Lee, and J. C. Lin, ”Effects of solution temperature on mechanical properties of 319.0 aluminum casting alloys containing trace beryllium ”, Journal of Materials Research,V15, (2000),pp.2027-2035.
43. F. H. Samuel, and A. M. Samuel, “Decomposition of Fe-Intermetallics in Sr-Modified cast 6xxx type aluminum alloys for automotive skin”, Metallurgical and Materials Transactions A,V32A,(2001), pp.2061-2075.
44. D. J. Chakrabarti, and D. E. Laughlin, “Phase relations and precipitation in Al–Mg–Si alloys with Cu additions”, Progress in Materials Science, V49, (2004), pp. 389-410.
45. H. W. L. Philips,“ Equilibrium Diagrams of Aluminium Alloy Systems”, The Aluminum Development Association, London,(1961), pp. 128-33.
46. J. Crowther, ”Overheating Phenomena in Aluminium-Magnesium-Silicon Alloys of the Duralumin Type”, J. Inst. Metals, V76, (1949-50), pp. 201-236.
47. C. H. Ca´ceres, M.B. Djurdjevic, T.J. Stockwell and J.H. Sokolowski,” The effect of Cu content on the level of microporosity in Al-Si-Cu-Mg casting alloys”, Scripta Materialia, V40, (1999), pp. 631-637.
48. K. G. Basavakumar, P. G. Mukunda, and M. Chakraborty,” Impact toughness in Al–12Si and Al–12Si–3Cu cast alloys—Part 1: Effect of process variables and microstructure”, International Journal of Impact Engineering, V35, (2008),pp.199–205.
49. L. Lasa, and J. M. Rodriguez-Ibabe,“Evolution of the main intermetallic phases in Al-Si-Cu-Mg casting alloys during solution treatment”, Journal of Materials Science, V 39, (2004) , pp.1343 – 1355.
50. 劉國雄, 林樹均, 李勝隆, 鄭晃忠,葉均蔚編著,工程材料科學,全華圖書,pp. 328-332.
51. 劉國雄, 葉均蔚,“高強力鋁合金之熱處理-析出硬化”,金屬熱處理, 14 期,1985,pp. 1-28.
52. D. Apelian, S. Shivkumar and G. Sigworth, “Fundamental aspects of heat treatment of cast Al-Si-Mg alloys”, AFS Trans., V97, (1989), pp. 727-743.
53. J. Gauthier, P. R. Louchez and F. H. Samuel, “Heat treatment of 319.2 aluminum automotive alloy”, AFS Int. Cast Metals, V8, (1995), pp. 91-106.
54. L. E. Marsh and G. Reinenann, AFS Trans., V87, (1979), pp. 413-422.
55. J. E. Hatch, ”Aluminum: properties and physical metallurgy” , London, Butterwordths and Co., Ltd.,(1976),pp.143-148.
56. 劉偉隆, 林淳杰, 曾春風, 陳文照, “物理冶金”, 全華科技圖書股份有限公司, (1996),pp.16-10~11.
57. S. Shivkumar, S. Ricci, Jr., and D. Apelian, “Influence of solution parameters and simplified supersaturation treatments on tensile properties of A356 Alloy”, AFS Transaction, V98, (1990),pp.913-922.
58. G. Wang , Q. Sun, L. Feng, L. Hui, and C. Jing,“Influence of Cu content on ageing behavior of AlSiMgCu cast alloys”, Materials and Design, V28, (2007), pp.1001–1005.
59. Y. J. Li, S. Brusethaug, and A. Olsen, ”Influence of Cu on the mechanical properties and precipitation behavior of AlSi7Mg0.5 alloy during aging treatment”, Scripta Materialia, V54,(2006), pp. 99-103.
60. Z. Ma, E. Samuel, A. M. A. Mohamed, A. M. Samuel, F. H. Samuel and H. W. Doty,“Influence of aging treatments and alloying additives on the hardness of Al–11Si–2.5Cu–Mg alloys”, Materials and Design , V31 , (2010), pp.3791-3803.
61. P. Ouellet and S. H. Samuel, “Effect of Mg on the aging behaviour of Al-Si-Cu 319 type aluminium casting alloys” , Journal of Materials Science,V34, (1999), pp. 4671-4697.
62. M. Gupta, and E. J. Lavernia, “Effect of processing on the microstructural variation and heat-treatment response of a hypereutectic Al-Si Alloy”, Journal of Materials Processing Technology, V54, (1995), pp.261-270.
63. N. Crowell, and S. Shivkumar, " Solution treatment effects in cast Al-Si-Cu alloys ", AFS Transactions, V103, (1995), pp.721-726.
64. ASTM G40-82, “Annual book of ASTM Standards”, V03.02, (1984), p. 239.
65. A. P. Sannino and H. J. Rack, “Dry sliding wear of discontinuously reinforced aluminum composites: review and discussion”, Wear, V189, (1995), pp. 1-19.
66. K. H. Z. Gahr, “Microstructure and wear of materials”, Chapter 4 Classification of wear process, Elsevier Science Publisher, Amsterdam, The Netherlands, (1987), pp.80-131.
67. K. G. Budinski, “Surface engineering for wear resistance”, Prentice Hall, (1988), pp.16-18.
68. K. H. Z. Gahr, “Microstructure and wear of materials”, Chapter 6 Sliding wear, Elsevier Science Publisher, Amsterdam, The Netherlands, (1987), pp. 351-495.
69. 張勁燕編著,“電子材料”,五南圖書出版有限公司,p.175.
70. 楊錦章,“基礎濺鍍電漿”, 電子發展月刊,68期(72),p13.
71. Wolf and R. N. Tauber, Silicon Processing for the VLCI Era Vol. 1 — Process Technology, Lattice Press, Cunset Beach, CA, 2000.
72. Hong Xiao“半導體製程技術導論”歐亞書局,(2001), pp.463-465.
73. B. Chapman, ”Glow Discharge Processes”, John Wiley and Sons, New York, 1980.
74. C. Y. Chang and R. W. Vook,“Topography and microstructure of Al films formed under various deposition conditions” Journal of Vacuum Science and Technology A, V9,(1991),pp.559-562.
75. R. AberMann,“Internal stress of vapour-deposited aluminum films effect of O2 and water vapour present during film depsosition”, Thin Solid films,V186,(1990),pp.233-240.
76. U. Smith, N. Kristensen, F. Erison, and J.A. Schweitz,“Local stress relaxation phenomena in thin aluminum films” Journal of Vacuum Science and Technology A,V9,(1991),pp.2527-2535.
77. E. Iwamura, T. Ohnishi, and K. Yoshikawa,“A study of hillock formation on Al-Ta alloy films for interconnections of TFT-LCDs”, Thin Solid Films,V270,(1995),pp.450-455.
78. E. Iwamura, K. Takagi, and T. Ohnish,“Effect of aluminium oxide caps on hillock formation in aluminium alloy flms”, Thin Solid Films, V349 (1999),pp. 191-198.
79. T. Arai, and H. Iiyori“Annealing effects of anodized Al-based alloy for thin-film transistors”, Thin Solid Films, V 318, (1998), pp. 257-261.
80. H. S. Hu, A. J. Mardinly, and T. G. Nish,“Aluminum-samarium alloy for interconnections in integrated circuits” Journal of Vacuum Science and Technology A, V8,(1990),pp.1480-1483.
81. Y. K. Lee, N. Fujimura, and T. lto,“Annealing behavior of Al-Y alloy film for interconnection conductor in microelectronic devices” Journal of Vacuum Science and Technology B, V9,(1991), pp.2542-2547.
82. S. Takayama,“Low resistivity Al-RE (RE=La,Pr,and,Nd) alloy thin films with high thermal stability for thin-film-transistor interconnects” Journal of Vacuum Science and Technology B, V14,(1996), pp.3257-3262.
83. T. Arai, H. Takatsuji, and H. Iiyori,“Nitrogen-added Al rare-earth alloys for thin film transistors”,Thin Solid Films,V337, (1999),pp.113-117.
84. A. J. Griffin, Jr., F. R. Brotzen, and C. F .Dunn,“Mechanical properties and microstructures of Al-1%Si thin film metalliziations”Thin Soild Films,V150,(1987),pp.237-244.
85. R. Venkatraman, and J. C. Bravman,“Separation of film thickness and grain boundary strengthening effects in Al thin films on Si” Journal of Materials Research,V7,(1992),pp.2040-2048.
86. A. F. Norman, P. B. Prangnell and R. S. McEwen, “The solidification behaviour of dilute aluminum-scandium alloys”, Acta Materialia, V46 , (1999), pp.5715-5732.
87. K. A. Gschneidner and F. W. Calderwood,“Bull. Alloy Phase Diagr.” ,V10, (1989), p.34.
88. G. M. Novotny and A. J. Ardell, “Precipitation Of Al3Sc In Al-Sc Alloys”, Materials Science & Engineering A, V318A,(2001), pp. 144-154.
89. “Applications of Scandium In Al-Sc Alloys”, Ashurst Technology Web Page (http://www.scandium.org/Sc-Al.htm).
90. E. A. Marquis and D. N. Seidman, “Nanoscale structure evolution Of Al3Sc precipitation in Al(Sc) alloys”, Acta Materialia, V49,(2001), pp.1909-1919.
91. D. N. Seidman, E. A. Marquis and D. C. Dunand, “Precipitation strengthening at ambient and elevated temperature of heat- treatable Al(Sc) alloys”, Acta Materialia, V50,(2002), pp.4021- 4035.
92. L. Lasa, and J. M. Rodriguez-Ibabe,“Characterization of the dissolution of the Al2Cu phase in two Al–Si–Cu–Mg casting alloys using calorimetry”, Materials Characterization, V48, (2002), pp.371– 378.
93. D. B. Williams and C. B. Carter, “Transmission electron microscopy, a textbook for material science”, Plenum Pres, New York, (1996), pp. 9-11.
94. G. Riontino and S. Abis, “Scanning electrical resistivity (SER) study of phase transformations in an Al-Cu alloy”, Philosophical Magazine B, V64, (1991), pp. 447-461.
95. 劉國雄,林樹均,李勝隆,鄭晃忠,葉均蔚, “工程材料科學“,全華書局(1995),pp.406-411.
96. 汪建民“材料分析”中國材料科學學會,(1998),p.115.
97. Hong Xiao“半導體製程技術導論”歐亞書局, (2001), p.449.
98. M.Ohring,“The material science of thin films”,Academic Press,America, (1991),pp.416-425.
99. M. L. Kharakterova, “Phase Composition of Al-Cu-Sc Alloys at Temperatures of 450 and 500℃”, Izvestiya Akademii Nauk SSSR. Metally, No. 4, (1991), pp.195-199.
100. V. V. Zakharov and T. D. Rostova, “On the possibility of scandium alloying of copper-containing aluminum alloys”, Metal Science and Heat Treatment, V37, (1995), pp.65-69.
101. I. A. Blech and H. Sello, “The failure of thin aluminum current-carrying strips of oxidized silicon (Description of New Mode of metal failures due to passage of direct current at high current density – electrical opens in aluminum strips on silicon oxide)” Physics of Failure in Electronics, V5, (1967), pp.496-505.
102. 陳淵崇, 陳金多, 趙勤孝, 葉建宏 “光碟用反射層靶材”,工業材料177期, (2001), pp.124-131.
103. F.Bouchard and W.A. Manring,“Simulations of metallization uniformity from large planar sputtering targets”, Multilevel Interconnection, Spie, V.2090,(1993),pp.218-226.
|