參考文獻 |
1. A. Weber and E. Ivers-Tiffée, “Materials and Concepts for Solid Oxide Fuel Cells (SOFCs) in Stationary and Mobile Applications,” Journal of Power Sources, Vol. 127, pp. 273-283, 2004.
2. H. Yokokawa, N. Sakai, T. Horita, and K. Yamaji, “Recent Developments in Solid Oxide Fuel Cell Materials,” Fuel Cells, Vol. 1, pp. 117-131, 2001.
3. W. Z. Zhu and S. C. Deevi, “A Review on the Status of Anode Materials for Solid Oxide Fuel Cells,” Materials Science and Engineering, Vol. A 362, pp. 228-239, 2003.
4. K. Kendall, N. Q. Minh, and S. C. Singhal, “Cell and Stack Designs,” Chapter 8 in High Temperature Solid Oxide Fuel Cells: Fundamentals, Design and Applications, edited by S. C. Singhal and K. Kendall, Elsevier, Kidlington, UK, 2003.
5. N. Q. Minh, “Solid Oxide Fuel Cell Technology-Features and Applications,” Solid State Ionics, Vol. 174, pp. 271-277, 2004.
6. H. Yokokawa, N. Sakai, T. Horita, and K. Yamaji, “Recent Developments in Solid Oxide Fuel Cell Materials,” Fuel Cells, Vol. 1, pp. 117-131, 2001.
7. T.-L. Wen, D. Wang, M. Chen, H. Tu, Z. Lu, Z. Zhang, H. Hie, and W. Huang, “Material Research for Planar SOFC Stack,” Solid State Ionics, Vol. 148, pp. 513-519, 2002.
8. P. A. Lessing, “A Review of Sealing Technologies Applicable to Solid Oxide Electrolysis Cells,” Journal of Materials Science, Vol. 42, pp. 3465-3476, 2007.
9. I. W. Donald, “Preparation, Properties and Chemistry of Glass- and Glass-Ceramic-to-Metal Seals and Coatings.” Journal of Materials Science, Vol. 28, pp. 2841-2886, 1993.
10. J. W. Fergus, “Sealants for Solid Oxide Fuel Cells,” Journal of Power Sources, Vol. 147, pp. 46-57, 2005.
11. K. S. Weil, “The State-of-the-Art in Sealing Technology for Solid Oxide Fuel Cells,” JOM Journal of the Minerals, Metals and Materials Society, Vol. 58, pp. 37-44, 2006.
12. C.-K. Lin, T.-T. Chen, Y.-P. Chyou, and L.-K. Chiang, “Thermal Stress Analysis of a Planar SOFC Stack,” Journal of Power Sources, Vol. 164, pp. 238-251, 2007.
13. C.-K. Lin, L.-H. Huang, L.-K. Chiang, and Y.-P. Chyou, “Thermal Stress Analysis of Planar Solid Oxide Fuel Cell Stacks: Effects of Sealing Design,” Journal of Power Sources, Vol. 192, pp. 515-524, 2009.
14. W. Z. Zhu and S. C. Deevi, “Development of Interconnect Materials for Solid Oxide Fuel Cells,” Materials Science and Engineering, Vol. 348, pp. 227-243, 2003.
15. N. Q. Minh, C. R. Horne, F. S. Liu, D. M. Moffatt, P. R. Staszak, T. L. Stillwagon, and J. J. VanAckeren, “Fabrication and Characterization of Monolithic Solid Oxide Fuel Cells,” pp. 230-234 in Proceedings of the Twenty Fifth Intersociety Energy Conversion Engineering Conference, Vol. 13, American Institute of Chemical Engineers, New York, 1990.
16. S. C. Singhal, “Progress in Tubular Solid Oxide Fule Cell Technology,” pp. 39-51 in Proceedings of the Sixth International Symposium on Solid Oxide Fuel Cells, edited by S.C. Singhal and M. Dokiya, Honolulu, Hawaii, Octocber 17-22, 1999.
17. N. Q. Minh, “Ceramic Fuel Cells,” Journal of the American Ceramic Society, Vol. 76, pp. 563-588, 1993.
18. S. P. S. Badwal, “Stability of Solid Oxide Fuel Cell Components,” Solid State Ionics, Vol.143, pp. 39-46, 2001.
19. H. Tsuneizumi, “Development of Solid Oxide Fuel Cell with Metallic Separator,” pp. 293-296 in Proceedings of the International Fuel Cell Conference, NEDO/MITI, Tokyo, Japan, 1992.
20. J. H. Hirschenhofer, D. B. Stauffer, R. R. Engleman, and M. G. Klett, Fuel Cell Handbook, U.S. Department of Energy, Morgantown, West Virginia, USA, p. 13, 1998.
21. I. G. Wright, B. A. Pint, C. S. Simpson, and P. F. Tortorelli, “The High-Temperature Oxidation Behavior of ODS-Fe3Al,” Materials Science Forum, Vols. 251-254, pp. 195-202, 1997.
22. K. Foger, R. Donelson, and R. Ratnarj, “Demonstration of Anode Supported Cell Technology in KW Class Stack,” pp. 95-100 in Proceedings of the Sixth International Symposium on Solid Oxide Fuel Cells, edited by S. C. Singhal and M. Dokiya, Honolulu, Hawaii, Octocber 17-22, 1999.
23. M. Hsu, “Zirconia Fuel Cell Power System,” p. 115 in Abstracts of Fuel Cell Seminar, Tucson, Arizona, May 19-22, 1985.
24. A. Pramuanjaroenkij, S. Kakac, and X.-Y. Zhou, “Mathematical Analysis of Planar Solid Oxide Fuel Cells,” International Journal of Hydrogen Energy, Vol. 33, pp. 2547-2565, 2008.
25. S. Linderoth, P. V. Hendriksen, M. Mogensen, and N. Langvad, “Investigations of Metallic Alloys for Use as Interconnects in Solid Oxide Fuel Cell Stacks,” Journal of Materials Science, Vol. 31, pp. 5077-5082, 1996.
26. W. J. Quadakkers, H. Greiner, and W. Kock, “Metals and Alloys for High Temperature SOFC Application,” pp. 525-541 in Proceedings of the First European Solid Oxide Fuel Cell Forum, Vol. 1, edited by V. Bossel, Lucerne, Switzerland, Octocber 3-7, 1994.
27. S. Taniguchi, M. Kadowaki, H. Kawamura, T. Yasuo, Y. Akiyama, Y. Miyake, and T. Saitoh, “Degradation Phenomena in the Cathode of a Solid Oxide Fuel Cell with an Alloy Separator,” Journal of Power Sources, Vol. 55, pp. 73-79, 1995.
28. J. W. Fergus, “Effect of Cathode and Electrolyte Transport Properties on Chromium Poisoning in Solid Oxide Fuel Cells,” International Journal of Hydrogen Energy, Vol. 32, pp. 3664-3671, 2007.
29. J. W. Fergus, “Metallic Interconnects for Solid Oxide Fuel Cells,” Materials Science and Engineering, Vol. A 397, pp. 271-283, 2005.
30. W. J. Quadakkers, J. Piron-Abellan, V. Shemet, and L. Singheiser, “Metallic Interconnectors for Solid Oxide Fuel Cells-a Review,” Materials at High Temperatures, Vol. 20, pp. 115-127, 2003.
31. K. Huang, P. Hou, and J. Goodenough, “Characterization of Iron-based Alloy Interconnects for Reduced Temperature Solid Oxide Fuel Cells,” Solid State Ionics, Vol. 129, pp. 237-250, 2000.
32. Z. G. Yang, K. S. Weil, D. M. Paxton, and J. W. Stevenson, “Selection and Evaluation of Heat-Resistant Alloys for Planar SOFC Interconnect Applications,” pp. 522-525 in 2002 Fuel Cell Seminar: Fuel Cells-Reliable, Clean Energy for the World FC Seminar, Palm Springs, California, November 19-21, 2002.
33. S. Linderoth and P. H. Larsen, “Investigations of Fe-Cr Ferritic Steels as SOFC Interconnect Material,” pp. 325-330 in Proceedings of New Materials for Batteries and Fuel Cells Materials Symposium, edited by D. H. Doughty, L. F. Nazar, M. Arakawa, H. P. Brack, and K. Naoi, , San Francisco, California, USA, April 5-8, 1999.
34. I. Antepara, I. Villarreal, L. M. Rodr′ıguez-Mart′ınez, N. Lecanda, U. Castro, and A. Laresgoiti, “Evaluation of Ferritic Steels for Use as Interconnects and Porous Metal Supports in IT-SOFCs,” Journal of Power Sources, Vol. 151, pp. 103-107, 2005.
35. H. Nabielek, “Review of SOFC Manufacturing Technologies,” in Proceedings of Taiwan SOFC Workshop, edited by C.-B. Ma, Longtan, Taiwan, June 6-8, 2006.
36. K. Fujita, K. Ogaswara, Y. Matsuzaki, and T. Sakurai, “Prevention of SOFC Cathode Degradation in Contact with Cr-Containing Alloy,” Journal of Power Sources, Vol. 131, pp. 261-269, 2004.
37. S. Fontana, R. Amendola, S. Chevalier, P. Piccardo, G. Caboche, M. Viviani, R. Molins, and M. Sennour, “Metallic Interconnects for SOFC: Characterisation of Corrosion Resistance and Conductivity Evaluation at Operating Temperature of Differently Coated Alloys,” Journal of Power Sources, Vol. 171, pp. 652-662, 2007.
38. L. Mikkelsen, M. Chen, P. V. Hendriksen, A. Persson, N. Pryds, and K. Rodrigo, “Deposition of La0.8Sr0.2Cr0.97V0.03O3 and MnCr2O4 Thin Films on Ferritic Alloy for Solid Oxide Fuel Cell Application,” Surface and Coatings Technology, Vol. 202, pp. 1262-1266, 2007.
39. X. Montero, F. Tietz, D. Sebold, H. R. Buchkremer, A. Ringuede, M. Cassir, A. Laresgoiti, and I. Villarreal, “MnCo1.9Fe0.1O4 Spinel Protection Layer on Commercial Ferritic Steels for Interconnect Applications in Solid Oxide Fuel Cells,” Journal of Power Sources, Vol. 184, pp. 172-179, 2008.
40. N. Shaigan, W. Qu, D. G. Ivey, and W. Chen, “A Review of Recent Progress in Coatings, Surface Modifications and Alloy Developments for Solid Oxide Fuel Cell Ferritic Stainless Steel Interconnects,” Journal of Power Sources, Vol. 195, pp. 1529-1542, 2010.
41. K. P. Recknagle, R. E. Williford, L. A. Chick, D. R. Rector, and M. A. Khaleel, “Three-Dimensional Thermo-Fluid Electochemical Modeling of Planar SOFC Stacks,” Journal of Power Sources, Vol. 113, pp. 109-114, 2003.
42. P. Lamp, J. Tachtler, O. Finkenwirth, S. Mukerjee, and S. Shaffer, “Development of an Auxiliary Power Unit with Solid Oxide Fuel Cells for Automotive Applications,” Fuel Cells, Vol. 3, pp. 146-152, 2003.
43. H. Apfel, M. Rzepka, H. Tu, and U. Stimming, “Thermal Start-up Behaviour and Thermal Management of SOFC’s,” Journal of Power Sources, Vol. 154, pp. 370-378, 2006.
44. H. Kurokawa, K. Kawamura, and T. Maruyama, “Oxidation Behavior of Fe-16Cr Alloy Interconnect for SOFC under Hydrogen Potential Gradient,” Solid State Ionics, Vol. 168, pp. 13-21, 2004.
45. Z. Yang, G.-G. Xia, M. S. Walker, C.-M. Wang, J. W. Stevenson, and P. Singh, “High Temperature Oxidation/Corrosion Behavior of Metals and Alloys under a Hydrogen Gradient,” International Journal of Hydrogen Energy, Vol. 32, pp. 3770-3777, 2007.
46. S. J. Geng, J. H. Zhu, and Z. G. Lu, “Evaluation of Haynes 242 Alloy as SOFC Interconnect Material,” Solid State Ionics, Vol. 32, pp. 559-568, 2006.
47. P. E. Gannon, C. T. Tripp, A. K. Knospe, C. V. Ramana, M. Deibert, R. J. Smith, V. I. Gorokhovsky, V. Shutthanandan, and D. Gelles, “High-Temperature Oxidation Resistance and Surface Electrical Conductivity of Stainless Steels with Filtered Arc Cr-Al-N Multilayer and/or Superlattice Coatings,” Surface and Coatings Technology, Vols. 188-189, pp. 55-61, 2004.
48. S. Fontana, R. Amendola, S. Chevalier, P. Piccardo, G. Caboche, M. Viviani, R. Molins, and M. Sennour, “Metallic Interconnects for SOFC: Characterisation of Corrosion Resistance and Conductivity Evaluation at Operating Temperature of Differently Coated Alloys,” Journal of Power Sources, Vol. 171, pp. 652-662, 2007.
49. J. Froitzheim, G. H. Meier, L. Niewolak, P. J. Ennis, H. Hattendorf, L. Singheiser, and W. J. Quadakkers, “Development of High Strength Ferritic Steel for Interconnect Application in SOFCs,” Journal of Power Sources, Vol. 178, pp. 163-173, 2008.
50. B. Kuhn, C. A. Jimenez, L. Niewolak, T. Hüttel, T. Beck, H. Hattendorf, L. Singheiser, and W. J. Quadakkers, “Effect of Laves Phase Strengthening on the Mechanical Properties of High Cr Ferritic Steels for Solid Oxide Fuel Cell Interconnect Application,” Materials Science and Engineering, Vol. A 528, pp. 5888-5899, 2011.
51. N. Fujita, K. Ohmura, M. Kikuchi, T. Suzuki, S. Funaki, and I. Hiroshige, “Effect of Nb on High-temperature Properties for Ferritic Stainless Steel,” Scripta Materialia, Vol. 35, pp. 705-710, 1996.
52. T. Onizawa, T. Wakai, M. Ando, and K. Aoto, “Effect of V and Nb on Precipitation Behavior and Mechanical Properties of High Cr Steel,” Nuclear Engineering and Design, Vol. 238, pp. 408-416, 2008.
53. G.-M. Sim, J.-C. Ahn, S.-C. Hong, K.-J. Lee, and K.-S. Lee, “Effect of Nb Precipitate Coarsening on the High Temperature Strength in Nb Containing Ferritic Stainless Steels,” Materials Science and Engineering, Vol. A 396, pp. 159-165, 2005.
54. F. Abe, “Creep Rates and Strengthening Mechanisms in Tungsten-Strengthened 9Cr Steels,” Materials Science and Engineering, Vols. A 319-321, pp. 770-773, 2001.
55. J. Hald, “Metallurgy and Creep Properties of New 9-12%Cr Steels,” Steel Research, Vol. 67, pp. 369-374, 1996.
56. Material Data Sheet No. 4046: Crofer 22 APU, http://www.thyssenkruppvdm.Com/en/downloads/data-sheets/?no cache=1 (accessed 10.10.11).
57. Material Data Sheet No. 4050: Crofer 22 H, http://www.thyssenkruppvdm.com/en/downloads/data-sheets/?no cache=1 (accessed 10.10.11).
58. L. Paul, H. Hattendorf, L. Niewolak, B. Kuhn, O. Ibas, and W. J. Quadakkers, “Crofer 22 H-a New High Strength Ferritic Steel for Interconnectors in SOFCs,” in Proceedings of the 2010 Fuel Cell Seminar and Exposition, San Antonio, TX, USA, October, 2010.
59. Y.-P. Chyou, T.-D. Chung, J.-S. Chen, and R.-F. Shie, “Integrated Thermal Engineering Analyses with Heat Transfer at Periphery of Planar Solid Oxide Fuel Cell,” Journal of Power Sources, Vol. 139, pp. 126-140, 2005.
60. “Standard Test Method for Tension Testing of Metallic Materials,” ASTM Standard E8/E8M-09, ASTM International, West Conshohocken, PA, USA, pp. 1-27, 2009.
61. T. R. McNelly and S. F. Gates, “Inverse Strain-Rate Sensitivity and the Portevin-Le Chatelier Effect,” Acta Metallurgica, Vol. 26, pp. 1605-1614, 1978.
62. L. P. Kubin, K. Chihab, and Y. Estrin, “The Rate Dependence of the Portevin-Le Chatelier Effect,” Acta Metallurgica, Vol. 36, pp. 2707-2718, 1988.
63. J. Chen, B. Young, and B. Uy, “Behavior of High Strength Structural Steel at Elevated Temperatures,” Journal of Structural Engineering, Vol. 132, pp. 1948-1954, 2006.
64. J. Chen and B. Young, “Design of High Strength Steel Columns at Elevated Temperatures,” Journal of Constructional Steel Research, Vol. 64, pp. 689-703, 2008.
65. J. D. Baird and A. Jamieson, “Effects of Manganese and Nitrogen on the Tensile Properties of Iron in the Range 20-600oC,” Journal of the Iron and Steel Institute, Vol. 204, pp. 793-803, 1966.
66. H. Yan, H. Bi, X. Li, and Z. Xu, “Precipitation and Mechanical Properties of Nb-Modified Ferritic Stainless Steel During Isothermal Aging,” Materials Characterization, Vol. 60, pp. 204-209, 2009.
67. S.-G. Hong, W.-B. Lee, and C.-G. Park, “The Effects of Tungsten Addition on the Microstructural Stability of 9Cr-Mo Steels,” Journal of Nuclear Materials, Vol. 288, pp. 202–207, 2001.
68. N. Fujita, K. Ohmura, and A. Yamamoto, “Changes of Microstructures and High Temperature Properties During High Temperature Service of Niobium Added Ferritic Stainless Steels,” Materials Science and Engineering, Vol. A 351, pp. 272-281, 2003.
69. K. Yamamoto, Y. Kimura, F.-G. Wei, and Y. Mishima, “Design of Laves Phase Strengthened Ferritic Heat Resisting Steel in Fe-Cr-Nb(-Ni) System,” Materials Science and Engineering, Vols. A 329-331, pp. 249-254, 2002.
70. A. Miyazaki, K. Takao, and O. Furukimi, “Effect of Nb on the Proof Strength of Ferritic Stainless Steels at Elevated Temperatures,” Iron and Steel Institute of Japan International, Vol. 42, pp. 916-920, 2002.
71. A. K. Mukherjee, J. E. Bird, and J. E. Dorn, “Experimental Correlation for High-Temperature Creep,” Transactions of the American Society for Metals, Vol. 62, pp. 155-179, 1969.
72. N. E. Dowling, Mechanical Behavior of Materials, 3rd Ed., Pearson Education, Inc., New Jersey, USA, 2007.
73. K. Maruyama, H. Ghassemi Armaki, R. P. Chen, K. Yoshimi, M. Yoshizawa, and M. Igarashi, “Cr Concentration Dependence of Overestimation of Long Term Creep Life in Strength Enhanced High Cr Ferritic Steels,” International Journal of Pressure Vessels and Piping, Vol. 87, pp. 276-281, 2010.
74. E. Arzt and D. S. Wilkinson, “Threshold Stresses for Dislocation Climb over Hard Particles: The Effect of an Attractive Interaction,” Acta Metallurgica, Vol. 34, pp. 1893-1898, 1986.
75. S. C. Tjong and Z. Y. Ma, “Creep Behaviour of Ferritic Fe-19Cr-4Ni-2Al Alloy,” Materials Letters, Vol. 56, pp. 59-64, 2002.
76. G. Schoeck, “The Activation Energy of Dislocation Movement,” Physica Status Solidi, Vol. 8, pp. 499-507, 1965.
77. F. C. Monkman and N. J. Grant, “An Empirical Relationship Between Rupture Life and Minimum Creep Rate in Creep-Rupture Tests,” Proceedings of the American Society of Testing and Materials, Vol. 56, pp. 593-620, 1956.
78. P. J. Ennis and A. Czyrska-Filemonowicz, “Recent Advances in Creep Resistant Steels for Power Plant Applications,” Power Plants: Operation, Maintenance and Material Issues, Vol. 1, pp. 1-28, 2002.
79. M. E. Kassner and T. A. Hayes, “Cavitation in Metals,” International Journal of Plasticity, Vol. 19, pp. 1715-1748, 2003.
80. P. F. Giroux, F. Dalle, M. Sauzay, J. Malaplate, B. Fournier, and A. F. Gourgues-Lorenzon, “Mechanical and Microstructural Stability of P92 Steel under Uniaxial Tension at High Temperature”, Materials Science and Engineering, Vol. A 527, pp. 3984-3993, 2010.
81. M. A. Sokolov, D. T. Hoelzer, R. E. Stoller, and D. A. McClintock, “Fracture Toughness and Tensile Properties of Nano-Structured Ferritic Steel 12YWT,” Journal of Nuclear Materials, Vols. 367-370, pp. 213-216, 2007.
82. F. Colombo, E. Mazza, S. R. Holdsworth, and R. P. Skelton, “Thermo-Mechanical Fatigue Tests on Uniaxial and Component-Like 1CrMoV Rotor Steel Specimens,” International Journal of Fatigue, Vol. 30, pp. 241-248, 2008.
83. D.-Q. Shi, J.-L. Liu, X.-G. Yang, H.-Y. Qi, and J.-K. Wang, “Experimental Investigation on Low Cycle Fatigue and Creep–Fatigue Interaction of DZ125 in Different Dwell Time at Elevated Temperatures,” Materials Science and Engineering, Vol. A 528, pp. 233-238, 2010.
84. J. W. Morris, “The Influence of Grain Size on the Mechanical Properties of Steel,” pp. 34-41 in Proceedings of International Symposium on Ultrafine Grained Steels, edited by S. Takaki and T. Maki, Iron and Steel Institute, Tokyo, Japan, 2001.
85. C. R. Barrett, J. L. Lytton, and O. D. Sherby, “Effect of Grain Size and Annealing Treatment on Steady State Creep of Copper,” Transactions of the American Institute of Mining, Metallurgical and Petroleum Engineers, Vol. 239, pp. 170-180, 1967.
86. X.-F Shi and G. -G. Cheng, “Study on Mechanism of TiN Formation and Precipitation in 430 Stainless Steel,” Steelmaking, Vol. 24, pp. 36-39, 2008.
87. D.-S. Bae, M.-H. Hong, and K. Miyahara, “TEM Investigation of the Interaction Between Dislocation and Nitride Precipitates in Deformed High Manganese-Chromium Austenitic Steels,” Solid State Communications, Vol. 125, pp. 347-350, 2003.
88. M.-H. Yoo and H. Trinkaus, “Crack and Cavity Nucleation at Interfaces During Creep,” Metallurgical and Materials Transactions, Vol. A 14, pp. 547-561, 1983.
89. A. S. Argon, I.-W. Chen, and C.-W. Lau, “Intergranular Cavitation in Creep: Theory and Experiments,” pp. 46-83 in Creep-Fatigue-Environment Interactions, edited by R. M. Pelloux and N. S. Stoloff, American Institute of Mining, Metallurgical and Petroleum Engineers, New York, USA, 1980.
90. A. J. Craven, K. He, L. A. J. Garvie, and T. N. Baker, “Complex Heterogeneous Precipitation in Titanium-Niobium Microalloyed Al-Killed HSLA Steels-I. (Ti,Nb)(C,N) Particles,” Acta Materialia, Vol. 48, pp. 3857-3868, 2000.
91. X.-J. Zhuoa, X.-H. Wang, W.-J. Wang, and H.-G. Lee, “Nature of Large (Ti,Nb)(C,N) Particles Precipitated During the Solidification of Ti,Nb HSLA Steel ,” Journal of University of Science and Technology Beijing, Vol. 14, pp. 112-117, 2007.
92. S.-Q. Yuan and G.-L. Liang, “Dissolving Behaviour of Second Phase Particles in Nb-Ti Microalloyed Steel,” Materials Letters, Vol. 63, pp. 2324-2326, 2009.
93. W.-Q. Wei, H.-W. Wang, Z.-X. Gau, and Z.-J. Wei, “Microstructure Evolution of As-Cast Nb-Ti-C Alloys,” Transactions of Nonferrous Metals Society of China, Vol. 19, pp. s440-s443, 2009.
94. J.-N. Moon, S.-H. Kim, H.-C. Jeong, J.-B. Lee, and C.-H. Lee, “Influence of Nb Addition on the Particle Coarsening and Microstructure Evolution in a Ti-Containing Steel Weld HAZ,” Materials Science and Engineering, Vols. A 454-455, pp. 648-653, 2007.
95. H. Cui, F. Sun, K. Chen, L.-T. Zhang, R.-C. Wan, A.-D. Shan, and J.-S. Wu, “Precipitation Behavior of Laves Phase in 10%Cr Steel X12CrMoWVNbN10-1-1 During Short-Term Creep Exposure,” Materials Science and Engineering, Vol. A 527, pp. 7505-7509, 2010.
96. D. R. Askeland and P. P. Fulay, Essentials of Materials Science and Engineering, 2nd Ed., Cengage Learning, Inc., Florida, USA, 2010.
97. J. Hald and Z. Kubon, “Thermodynamic Prediction of Microstructure,” pp. 159-178 in Microstructural Development and Stability in High Chromium Ferritic Power Plant Steels, edited by A. Strang and D. J. Gooch, Institute of Materials, Cambridge, USA, 1997.
98. V. Sklenicka, K. Kucharova, M. Svoboda, L. Kloc, J. Bursik, and A. Kroupa, “Long-Term Creep Behavior of 9-12%Cr Power Plant Steels,” Materials Characterization, Vol. 51, pp. 35-48, 2003.
99. N. Tsuji, Y. Matsubara, and Y. Saito, “Dynamic Recrystallization of Ferrite in Interstitial Free Steel,” Scripta Materialia, Vol. 37, pp. 477-484, 1997.
100. N. Tsuji, Y. Saito, and T. Maki, “Nucleation Condition of Dynamic Recrystallization in Ferritic Iron,” pp. 253-258 in The Fourth International Conference on Recrystallization and Related Phenomena, edited by T. Sakai and H. G. Suzuki, The Japan Institute of Metals, Japan, , 1999.
101. G. R. Stewart, J. J. Jonas, and F. Montheillet, “Kinetics and Critical Conditions for the Initiation of Dynamic Recrystallization in 304 Stainless Steel,” Iron and Steel Institute of Japan International, Vol. 44, pp. 1581-1589, 2004.
102. G. R. Stewart, A. M. Elwazri, S. Yue, and J. J. Jonas, “Modelling of Dynamic Recrystallisation Kinetics in Austenitic Stainless and Hypereutectoid Steels,” Materials Science and Technology, Vol. 22, pp. 519-524, 2006.
|