摘要(英) |
This thesis describes the use of Fizeau interferometer in optical testing of a roof prism. Through the analysis of the interference fringes, error angle of the roof prism, and the phase shift incurred by the roof surfaces are precisely determined.
Simulation is performed using CodeV to obtain values of error angle and phase shift. These values are then compared with the results achieved from our analytical calculation. The MTF and PSF information are also extracted from the simulation results, and used to compute the corresponding tolerance. The tolerance value is used for rapid determination of the prism quality.
This thesis describes in detail the phenomena observed in the experiments, the simulation results, and the analytical methods involved in the work. |
參考文獻 |
[1] B. &. Reviews, 15 9 2012. [線上]. Available: http://www.bestbinocularsreviews.com/.
[2] P. Mauer, “Phase Compensation of Total Internal Reflection,” Journal of the Optical Scoiety of America, pp. 1219-1221, September 1966.
[3] D. Malacara, "Optical Shop Testing" 3rd edition, Hoboken, New Jersey: John Wiley & sons, Inc., 2007.
[4] K. C. a. R. A. C. Garam Yun, “Three-dimensional polaization ray-tracing calculus I: definition and diattenuation,” APPLIED OPTICS, p. 11, 20 June 2011.
[5] E. W. Max Born, "Principles of optics", Cambridge United Kingdom: Cambirdge University Press, 1999.
[6] C. J. F.Roddier, “A Roatation Shearing Inteferometer with Phase-Compensated Roof Prisms,” J.Optics(Paris), pp. 145-149, 1978.
[7] http://www.opticsplanet.com/msgboard/about1-17996.html(2011)
[8]C. C. a. X. Q. Yi-Dong Liu, “Field rotation and polarization properties of Porro Prism,” J. Opt. Soc. Am. A, pp. 1157-1160, May 2009. |