參考文獻 |
參考文獻
[1] C. S. Liu, K. W. Lin, and S. H. Jiang, “Development of precise autofocusing microscope based on reduction of geometrical fluctuations,” Proceedings of SICE Annual Conference 2012, pp. 967-972, 2012. (Akita, Japan, August 20-23, 2012).
[2] J. A. Armstrong and A. W. SMITH, “Intensity fluctuations in GaAs laser emission,” Phys. rev., vol. 40, pp.155-164 , 1965.
[3] E. Jakeman, C. J. Oliver, E. R. Pike, M. Lax, and M. Zwanziger, “The intensity fluctuation distribution of laser light,” J. Phys. A: Gen. Phys., vol. 3, pp. 52-55, 1970.
[4] K. A. Janulewicz, C. M. Kim, and H. Stiel, “Speckle statistics and transverse coherence of an x-ray laser with fluctuations in its active medium,” Opt. Express., vol. 21, pp. 3225-3234, 2013.
[5] I. Takeshi, S. Machida, K. Nawata, and T. Ikegami, “Intensity fluctuations in each longitudinal mode of a multimode ALGaAs Laser,” IEEE J. Quantum Electron., vol. 13, pp. 574-579, 1977.
[6] A. Rüdigera, R. Schillinga, L. Schnuppa, W. Winklera, H. Billinga, and K. Maischbergera, “ A mode selector to suppress fluctuations in laser beam geometry,” J. Mod. Opt., vol. 28, pp. 641-658, 1981.
[7] M. Tamir, U. Halavee and, E. Azoulay, “ Power fluctuations caused by laser beam wandering and shift,” Appl. Optics., vol. 20, pp. 734-735, 1981.
[8] S. Rowan and J. Hough, “Gravitational wave detection by interferometry (ground and space),” Living Rev. Relativity., vol. 3, pp. 4-31, 2005.
[9] J. M. Alonso, B. Monacelli, J. Alda, and G. D. Boreman, “Infrared laser beam temporal fluctuations: characterization and filtering,” Opt. Eng., vol. 44, no. 5, pp. 054203-1- 054203-10, 2005.
[10] C. C. Kuo and C. S. Chao, “Characterization of probe lasers for precision thin films optical inspection system,” J. Russ. Laser Res., vol. 31, pp. 22-31, 2010.
[11] D. W. Smith, “Reducing phase fluctuations in a coherent radiation beam using feedforward control,” U.S. Patent 4847477, 1989.
[12] E. Muka and N. Y. Woo, “Apparatus for stabilizing a laser beam,” European Patent 0 229 825 B1, 1986.
[13] H. Mizoguchi, Y. Amada, and N. Ito, “Laser device,” U.S. Patent 5535233, 1996.
[14] M. J. W. Rodwell, K. J. Weingarten, and D. M. Bloom, “Reduction of timing fluctuations in a mode-locked Nd:YAG laser by electronic feedback,” Opt. Lett., vol. 11, pp. 638-640, 1986.
[15] S. Nakamura, T. Maeda, and Y. Tsunoda, “Autofocusing effect due to wavelength change of diode lasers in an optical pickup,” Appl. Opt., vol. 26, pp. 2549-2553, 1987.
[16] I. A. Andronova and I. L. Bershtein, “Suppression of fluctuations of the intensity of radiation emitted by semiconductor lasers,” Sov. J. Quantum Electron., vol. 21, pp. 616-618, 1991.
[17] V. V. Vorobev, “Reduction of fluctuations of the laser beam intensity by defocusing with an extended lens,” Sov. J. Quantum Electron., vol. 11, pp. 405-406, 1981.
[18] S. E. Miller, “On single-mode injection laser structures for reduced output fluctuations,” IEEE J. Quantum Electron., vol. 21, pp. 1644-1658, 1985.
[19] S. Matsuo, L. Yan, J. Si, T. Tomita, and S. Hashimoto, “Reduction of pulse-to-pulse fluctuation in laser pulse energy using the optical Kerr effect,” Opt. Lett., vol. 37, pp. 1646-1648, 2012.
[20] H. M. Wiseman and G. J. Milburn, “Reduction in laser-intensity fluctuations by a feedback-controlled output mirror,” Phys. Rev. A., vol. 46, pp. 2853-2858, 1992.
[21] W. R. Bennett and V. P. Chebotayev, “Laser with reduced intensity fluctuations,” U.S. Patent 5251229, 1993.
[22] R. V. Leeuwen and T. Oh, “Stabilized laser using multiphoton absorption to reduce intensity fluctuations,” U.S. Patent 6788715, 2004.
[23] C. S. Liu and S. H. Jiang, “A novel laser displacement sensor with improved robustness toward geometrical fluctuations of the laser beam,” Meas. Sci. Technol., vol. 24, pp. 105101-105108, 2013.
[24] E. Calloni, J. T. Baker, F. Barone, R. DeRosa, L. Di Fiore, L. Milano, and S. R. Restaino, “Adaptive optics approach for prefiltering of geometrical fluctuations of the input laser beam of an interferometric gravitational waves detector,” Rev. Sci. Instrum., vol. 74, pp. 2570-2574, 2003.
[25] K. H. Kim, S. Y. Lee, S. Kim, S. G. Jeong, ”DNA microarray scanner with a DVD pick-up head,” Curr. Appl. Phys., vol. 8, pp. 687-691, 2008.
[26] J. Y. Lee, Y. H. Wang, L. J. Lai, Y. J. Lin, and Y. H. Chang, “Development of an auto-focus system based on the Moiré method,” Measurement, vol. 44, pp. 1793-1800, 2011.
[27] E. Muka and N. Y. Woo, “Apparatus for stabilizing a laser beam,” European Patent 0 229 825 B1, 1986.
[28] K. Volyanskiy, Y. K. Chembo, L. Larger, and E. Rubiola, “Contribution of laser frequency and power fluctuations to the microwave phase noise of optoelectronic oscillators,” J. Lightwave Technol., vol. 28, pp. 2730-2735, 2010.
[29] M. He, W. Zhang, and X. Zhang, “A displacement sensor of dual-light based on FPGA,” Optoelectron.Lett., vol. 3, pp. 294-298, 2007.
[30] S. Nakamura, T. Maeda, and Y. Tsunoda, “Autofocusing effect due to wavelength change of diode lasers in an optical pickup,” Appl. Opt., vol. 26, pp. 2549-2553, 1987.
[31] X. Meng and L. Zeng, “Reducing the effect of laser beam fluctuations in a wind tunnel experiment by using an orthogonal-polarization compensation method,” Dept. of Precision Instrum., vol. 2, pp. 276-277, 2001.
[32] S. Gossler, M. M. Casey, A. Freise, A. Grant, and H. Grote, “Mode-cleaning and injection optics of the gravitational-wave detector GEO600,” Rev.Sci. Instrum., vol. 74, pp. 3787-3795, 2003.
[33] S. Avino, F. Barone, J. T. Baker, E. Calloni, R. DiRosa, L. DiFiore, L. Milano, and S. R. Restaino, “Adaptive Optics correction of geometrical fluctuations of Virgo input laser beam: preliminary results,” Proc. SPIE., vol. 4493, pp. 156-165, 2002.
[34] N. Descharmes and F. P. Shevlin, “Optical system and method,” U.S. Patent 20110102748, 2011.
[35] B. D. Silverstein and G. E. Nothhard, “Uniform speckle reduced laser projection using spatial and temporal mixing,” U.S. Patent 7959297, 2011.
[36] J. M. Florence, “Speckle-free display system using coherent light,” U.S. Patent 5313479, 1994.
[37] A. Furukawa, N. Ohse, Y. Sato, D. Imanishi, K. Wakabayashi, S. Ito, K. Tamamura, and S. Hirata, “Effective speckle reduction in laser projection displays,” Proc. SPIE., vol. 6911, pp. 69110-1-69110-7, 2008.
[38] W. Haa, S. Leea, Y. Jungb, J. Kimb, and K. Oh, “Speckle reduction in multimode fiber with a piezoelectric transducer in radial vibration for fiber laser marking and display applications,” Proc. SPIE., vol. 6873, pp. 68731-1-68731-8, 2008.
[39] S. Lowenthal and D. Joyeux, “Speckle Removal by a Slowly Moving Diffuser Associated with a Motionless Diffuser,” J. Opt. Soc. Am., vol. 61, pp. 847-851, 1971.
[40] Y. Kuratomi, K. Sekiya, H. Satoh, T. Tomiyama, T. Kawakami, B. Katagiri, Y. Suzuki, and T. Uchida, “Speckle reduction mechanism in laser rear projection displays using a small moving diffuser,” J. Opt. Soc. Am. A-Opt. Image Sci. Vis., vol. 27, pp. 1812-1817, 2010.
[41] K. Curtis, D. A. Coleman, and G. D. Sharp, “Speckle reduction using screen vibration techniques and apparatus,” U.S. Patent 20130010356, 2013.
[42] J. I. Trisnadi, “Speckle contrast reduction in laser projection displays,” Proc. SPIE., vol. 4657, pp. 131-1-131-7, 2002.
[43] B. D. Maxson, “Systems and methods for despeckling a laser light source,” U.S. Patent 20100053476, 2010.
[44] Z. Liao, T. Xing, G. Cheng, and W. Lin, “Speckle reduction in laser projection display by modulating illumination light,” Proc. SPIE, vol. 6622, pp. 662229-1-662229-9, 2008.
[45] S. V. Egge, M. N. Akram, V. Kartashov, K. Welde, Zhaomin Tong, U. Österberg, and A. Aksnes, “Sinusoidal rotating grating for speckle reduction in laser projectors: feasibility study,” Opt. Eng., vol. 50, pp. 083202-1-083202-8, 2011.
[46] J. Domm, “Decohered laser light production system,” U.S. Patent 20090168025, 2009.
[47] J. I. Trisnadi, “Hadamard speckle contrast reduction,” Opt. Lett., vol. 29, pp. 11-13, 2004.
[48] J. Knittel, “Beam shaper for an optical storage system,” U.S. Patent 8351316, 2013.
[49] E. M. H. P. V. Dijk, S. Stallinga, D. Leo J. Vossen, and M. I. Boamfa, “Beam shaping without introducing divergence within a light beam,” U.S. Patent 8421000, 2013.
[50] D. Michaelis, C. Wachter, N. Danz, S. Kudaev, and M. Flaemmich, “Beam shaper,” U.S. Patent 8469549, 2013.
[51] T. Rupp, J. Braun, D. Vees, J. M. Weick, and D. Burger, “Beam Shaping Unit For Focusing a Laser Beam,” U.S. Patent 20130044371, 2013.
[52] F. M. Dickey, L. S. Weichrnan, and R. N. Shagam, “Laser beam shaping techniques,” Proc. SPIE, vol. 4065, pp. 338-350 , 2000.
[53] R. Pereira, B. Weichelt, D. Liang, P. J. Morais, H. Gouveia, M. A. Ahmed, A. Voss, and T. Graf, “Efficient pump beam shaping for high-power thin-disk laser systems,” Appl. Opt., vol. 49, pp. 5157-5162, 2010.
[54] K. H. Hsu and H. Y. Lin, “Effects of the spatial frequency composition of the target pattern and the number of quantization levels in diffractive beam shaper design,” Appl. Opt., vol. 51, pp. 3313-3322, 2012.
[55] H. D. Doan, Y. Akamine, and K. Fushinobu, “Fluidic laser beam shaper by using thermal lens effect,” Int. J. Heat Mass Transf., vol. 55, pp. 2807-2812, 2012.
[56] X. Deng, X. Liang, Z. Chen, W. Yu, and R. Ma, “Uniform illumination of large targets using a lens array,” Appl. Opt., vol. 25, pp. 377-381, 1986.
[57] C. Liu, F. Zhang, C. Wang, Y. Lu, R. Geng, and S. Jian, “Silica-Taper Array for Beam Shaping of High Power Laser Diode Bar,” Opt. Rev., vol. 19, pp. 150-153, 2012.
[58] P. J. Smilie and T. J. Suleski, “Variable-diameter refractive beam shaping with freeform optical surfaces,” Opt. Lett., vol. 36, pp. 4170-4172, 2011.
[59] X. H. Lee, Y. Y. Chang, and C. C. Sun, “Highly energy-efficient agricultural lighting by B+R LEDs with beam shaping using micro-lens diffuser,” Opt. Commun, vol. 291, pp. 7-14, 2013.
[60] C. Zhu and Q. Liu, “Review of Monte Carlo modeling of light transport in tissues,” J. Biomed. Opt., vol. 18, pp. 050902-1-050902-12, 2013.
[61] F. C. MacKintosh and S. John, “Diffusing-wave spectroscopy and multiple scattering of light in correlated random media,” Phys. Rev. B., vol. 40, pp. 2383-2406, 1989.
[62] S. F. Chen, C. C. Sun, and C. S. Wu, “Design for a high dense wavelength division multiplexer based on volume holographic gratings,” Opt. Eng., vol. 43, pp. 2028-2033, 2004.
[63] H. C. Hulst, “Light scattering by small particles,” Dover Pubns, 1981.
[64] A. Horibe, M. Izhuara, E. Nihei, and Y. Koike, “Brighter backlights using highly scattered optical-transmission polymer,” J. Soc. Inf. Disp., vol. 3, pp. 169-171, 1995.
[65] A. Tagaya, M. Nagai, Y. Koike, and K. Yokoyama, “Thin liquid-crystal display backlight system with highly scattering optical transmission polymers,” Appl. Optics., vol. 40, pp. 6274-6280, 2001.
[66] J. C. Stover, “Optical scattering: measurement and analysis,” Society of Photo-Optical, 1995.
[67] J. M. Bennett, “Introduction to Surface Roughness and Scattering,” Optical Society of America, 1999.
[68] P. Beckmann and A. Spizzichino, “The scattering of electromagnetic waves from rough surfaces,” Artech House, 1987
[69] J. E. Harvey, “Light-scattering characteristics of optical surfaces,” Proc. SPIE, vol. 107, pp. 41-47, 1977.
[70] P. S. Heckbert, “Simulating global illumination using adaptive meshing,” University of California, PhD thesis, 1991.
[71] V. N. Mahajan, “Optical Imaging and Aberrations: Part I. Ray Geometrical Optics,” SPIE PRESS, 1998.
[72] R. W. Boyd, “Radiometry and the detection of optical radiation,” Wiley, 1983.
[73] C. S. Liu, and S. H. Jiang, “A novel laser displacement sensor with improved robustness toward geometrical fluctuations of the laser beam,” Meas. Sci. Technol., 2013.
[74] http://www.edmundoptics.com/
[75] http://www.thorlabs.com/
[76] G. M. Morris, S. Chakmakjian, and D. J. Schertler, “Engineered diffusers™ for display and illumination systems: Design, fabrication, and applications,” RPC Photonics, Inc., 2006.
[77] http://www.suss-microoptics.com/media/downloads/Instruction%20manual%20for%20Rotating%20diffuser%20system.pdf |