博碩士論文 100232009 完整後設資料紀錄

DC 欄位	值	語言
DC.contributor	照明與顯示科技研究所	zh_TW
DC.creator	陳翰琳	zh_TW
DC.creator	Han-lin Chen	en_US
dc.date.accessioned	2013-8-16T07:39:07Z
dc.date.available	2013-8-16T07:39:07Z
dc.date.issued	2013
dc.identifier.uri	http://ir.lib.ncu.edu.tw:88/thesis/view_etd.asp?URN=100232009
dc.contributor.department	照明與顯示科技研究所	zh_TW
DC.description	國立中央大學	zh_TW
DC.description	National Central University	en_US
dc.description.abstract	本論文主旨為利用Fizeau干涉儀來量測屋脊稜鏡的誤差角和經過屋脊面全反射產生的phase shift現象，並透過數學分析干涉條紋，來找出誤差角和phase shift。 此外，本論文也藉由CodeV的模擬來驗證實驗所觀察到的現象，因此在論文中，主要分成模擬的部分與實驗的部分，並在各部分中詳細的論述實驗中碰到的現象與解決的數學方法。最後，利用MTF和PSF的觀念來為屋脊稜鏡定下公差，使未來的使用者能夠對一個屋脊稜鏡的好壞來做出判斷。	zh_TW
dc.description.abstract	This thesis describes the use of Fizeau interferometer in optical testing of a roof prism. Through the analysis of the interference fringes, error angle of the roof prism, and the phase shift incurred by the roof surfaces are precisely determined. Simulation is performed using CodeV to obtain values of error angle and phase shift. These values are then compared with the results achieved from our analytical calculation. The MTF and PSF information are also extracted from the simulation results, and used to compute the corresponding tolerance. The tolerance value is used for rapid determination of the prism quality. This thesis describes in detail the phenomena observed in the experiments, the simulation results, and the analytical methods involved in the work.	en_US
DC.subject	屋脊稜鏡	zh_TW
DC.subject	屋脊面	zh_TW
DC.subject	誤差角	zh_TW
DC.subject	相位	zh_TW
DC.subject	Roof prism	en_US
DC.subject	Roof surface	en_US
DC.subject	PSF	en_US
DC.subject	MTF	en_US
DC.subject	Reference	en_US
DC.subject	Error angle	en_US
DC.subject	Phase shift	en_US
DC.title	屋脊稜鏡量測與公差的制定	zh_TW
dc.language.iso	zh-TW	zh-TW
DC.title	Measurement of Roof prism and Tolerancing	en_US
DC.type	博碩士論文	zh_TW
DC.type	thesis	en_US
DC.publisher	National Central University	en_US