博碩士論文 101322006 完整後設資料紀錄

DC 欄位 語言
DC.contributor土木工程學系zh_TW
DC.creator黃柏翰zh_TW
DC.creatorPo-han Huangen_US
dc.date.accessioned2014-8-28T07:39:07Z
dc.date.available2014-8-28T07:39:07Z
dc.date.issued2014
dc.identifier.urihttp://ir.lib.ncu.edu.tw:88/thesis/view_etd.asp?URN=101322006
dc.contributor.department土木工程學系zh_TW
DC.description國立中央大學zh_TW
DC.descriptionNational Central Universityen_US
dc.description.abstract本研究針對全鋼線網圍束中空複合構材之扭轉撓曲行為,進行一系列實驗研究探討,藉由 18 根相同斷面但不同配置之SRC構件進行彎矩、扭矩及彎矩與扭矩組合載重之試驗,藉由實驗之結果,推求適當之SRC構件細部配置,並探討麻面鋼線網對構件極限強度、破壞模式、勁度衰減與能量消散行為之影響。研究結果顯示,設置適當麻面鋼線網之構件在彎矩、扭矩及彎矩與扭矩作用下,其勁度皆高於設置箍筋之構件,麻面鋼線網不僅對構材核心混凝土圍束效果有相當之助益,其對構材之扭轉撓曲效能亦可有效提昇,上述結果顯示,應用麻面鋼線網於中空複合構材設計,具有相當之可行性。zh_TW
dc.description.abstractHollow composite members have been developed for a long time and people usually use stirrup in composite members. Composite members with stirrups are not only time-consuming, but also cost-highly. According to 18 specimen conducted in cyclic loading tests, the results show that all the specimen with WWF can be significantly enhance their stiffness and ability of energy dissipation. Hollow composite members with WWF do not only have good performance, but also save cost.en_US
DC.subject麻面鋼線網zh_TW
DC.subject扭轉zh_TW
DC.subject撓曲zh_TW
DC.subjectWelded wire fabricen_US
DC.subjectTorsionalen_US
DC.subjectFlexuralen_US
DC.title全鋼線網圍束中空複合構材之扭轉撓曲行為研究zh_TW
dc.language.isozh-TWzh-TW
DC.titleImproving Flexural-Torsional Behavior of Hollow Composite Members by Welded Wire Fabricsen_US
DC.type博碩士論文zh_TW
DC.typethesisen_US
DC.publisherNational Central Universityen_US

若有論文相關問題,請聯絡國立中央大學圖書館推廣服務組 TEL:(03)422-7151轉57407,或E-mail聯絡  - 隱私權政策聲明