| dc.description.abstract | To prevent hazard event, industry promotes occupational safety health management system. It may not be a right strategy since the system proceeds with hazard analysis or strategy planning after an event which hazard have existed already. We should do hazard analysis beforehand to avoid that happens. Hazard analysis in priori includes pre- hazard prevention, during- emergency response, and after- compensation measures. This strategy can eliminate hazard factors in manufacturing processes and avoid personnel accident which may cause serious social, economic and environmental impacts. This study applies systematic ideas and principles to establish a realistic method in manufacturing process analysis and management strategy planning. Also, trying to perform manufacturing hazard analysis at the very initial stage of manufacturing process settlement, analyze and define manufacturing process in a systematic way. Firstly, we define product of manufacturing process and analyze component and structure in manufacturing process. Next, workinh on analyzing input, output, operational procedure, and action mechanism in each component unit to deduce possible hazards from abnormal in exact time, involved facilities, operation parameters during proceeding of manufacturing process and analyze different impact aspects induced from each hazard. Proposing hazard prevention strategy in advance, emergency response on going, and compensation measures afterwards correspond to the hazard event. Each abnormal event causes cost loss while prevention strategy improves that. Both information on cost loss and cost improvement provide company manager for decision making. A case study in manufacture of solar panel module was conducted in this paper. The results showed the systematic method in manufacturing hazard analysis and hazard management planning that was composed from the study could analyze potential hazard in manufacturing process of solar panel effectively. Also, the proposed hazard management strategy could prevent happening of hazard event. Both results confirmed the proposed method was a correct one. | en_US |