| DC 欄位 |
值 |
語言 |
| DC.contributor | 電機工程學系 | zh_TW |
| DC.creator | 連映琦 | zh_TW |
| DC.creator | Ying-chi Lien | en_US |
| dc.date.accessioned | 2014-8-27T07:39:07Z | |
| dc.date.available | 2014-8-27T07:39:07Z | |
| dc.date.issued | 2014 | |
| dc.identifier.uri | http://ir.lib.ncu.edu.tw:88/thesis/view_etd.asp?URN=101521089 | |
| dc.contributor.department | 電機工程學系 | zh_TW |
| DC.description | 國立中央大學 | zh_TW |
| DC.description | National Central University | en_US |
| dc.description.abstract | 現今積體電路應用層面越來越廣泛，使得電路設計複雜度和需求日漸增高，所要考慮的設計條件也跟著變多。在健康照護的應用中，生理訊號擷取是偵測疾病相當重要的一環，然而，生理訊號相當微弱，很容易受到雜訊影響導致難以判讀，如何去降低雜訊對原始訊號的干擾，對生醫系統設計來說是一門重要的課題。本論文提出一套考量雜訊效應的類比電路系統自動化設計帄台，在電路尺寸調整流程中，加入相關雜訊的計算，並使用雜訊指數作評估，盡量降低電路受到雜訊的影響，最後可經由操作客製化的圖形介面，快速得到相對應的電路設計與電路佈局。整套自動化 類比設計平台在LINUX上實現，在線性規劃(linear programming)的部分用CPLEX來找尋最佳解，而在自動產生電路佈局上則是以C/C++及Tcl/Tk程式語言實現，並能在Laker環境下自動化完成佈局的過程。由模擬結果及晶片量測的數據觀察可知，本工具自動合成的運算放大器可成功應用在生理訊號擷取系統上，在加入雜訊考量後，整體的雜訊也確實縮小了。 | zh_TW |
| dc.description.abstract | The integrated circuits of nowadays have more and more applications. More functionality increases the complexity of circuit design, which also increases the conditions that have to be considered in the design process. In health care application, the bio-signal acquisition system is important to diagnose the diseases. However, because the bio-signals are often very weak, they can be influenced by noise easily
and become hard to distinguish. How to reduce the noise impacts on bio-signals is important in bio-system design. In this thesis, an automatic analog synthesis platform is presented to generate the required system from specification to layout with noise consideration. Noise Factor (NF) is introduced in the proposed circuit sizing flow to evaluate the noise impact and guide the optimization toward noise reduction. Finally,with a friendly Graphical User Interface (GUI), the required design and its corresponding layout can be generated in seconds. The whole synthesis platform has
been implemented in Linux with the optimization tool CPLEX, incorporating with an automatic layout generation platform implemented with C/C++ and Tcl/Tk on Laker. According to the simulation and chip measurement results, the automatically synthesized OPA can be used in the bio-signal acquisition system successfully. With noise consideration, the overall noise is also greatly reduced in noise simulation. | en_US |
| DC.subject | 設計自動化 | zh_TW |
| DC.subject | 電路合成 | zh_TW |
| DC.title | 用於生理訊號擷取系統之自動化類比設計平台 | zh_TW |
| dc.language.iso | zh-TW | zh-TW |
| DC.title | Automatic Analog Synthesis Platform for Bio-signal Acquisition System | en_US |
| DC.type | 博碩士論文 | zh_TW |
| DC.type | thesis | en_US |
| DC.publisher | National Central University | en_US |