dc.description.abstract | A Study of the Correlation between Geometric and Dynamic Properties of Twin Screw Compressor Rotors under Circulating Pressure Load. High performance and low noise are characteristics of twin screw compressors, and they are often used in many industries that require energy saving and high efficiency energy systems. Establishing a model that can successfully predict the dynamic responses of twin screw compressors under circulating pressure loads can improve the system’s rotational properties, and easily change various working components such as rotor screws, bearing components, gaining preliminary understanding of changes in rotational speed, rotation frequency, tooth load, and vibration signal in female rotors., substantial design parameters for the industry can then be provided. Therefore, this study proposes a new method to establish a multibody dynamics model for rotor screws and bearing systems. Variations in axial force, radial force and moment of force of circulating pressure on rotor screws within the compressor’s working chamber are investigated, Hertz contact stiffness of varying rotor contact on radius of curvature is also examined. Multibody dynamic responses of rotor screws and bearing systems within the oil-injected twin screw compressor are then examined through theory and examination. This study then uses the established multibody dynamics model to examine the internal working chamber’s nine dynamic properties, including excessive compression, vibration, half load, rotor axial deviation, and heat and pressure effects. These property changes are organized and concluded to inspect the effects on the female rotor’s rotational frequency output, tooth load, vibration signal frequency spectrum. The conclusions are provided as substantial suggestions for manufacturers to preliminarily investigate compressor noise source, and improving the dynamic properties of compressors. | en_US |