| DC 欄位 |
值 |
語言 |
| DC.contributor | 機械工程學系 | zh_TW |
| DC.creator | 朱雯婷 | zh_TW |
| DC.creator | Wen-Ting Chu | en_US |
| dc.date.accessioned | 2017-7-28T07:39:07Z | |
| dc.date.available | 2017-7-28T07:39:07Z | |
| dc.date.issued | 2017 | |
| dc.identifier.uri | http://ir.lib.ncu.edu.tw:88/thesis/view_etd.asp?URN=103323078 | |
| dc.contributor.department | 機械工程學系 | zh_TW |
| DC.description | 國立中央大學 | zh_TW |
| DC.description | National Central University | en_US |
| dc.description.abstract | 本論文使用點膠製程製作一U型電熱式微型鑷子，並結合一旋轉結構，使此元件擁有一個自由度的運動模式。元件運作原理主要是利用鑷子冷、熱臂膨脹量的不同，造成結構彎曲，進而使鑷子作動。在1 V電壓驅動下，鑷子尖端產生441 μm的位移量，本論文成功使用鑷子夾取直徑約1 mm的玻璃珠。
元件的設計與分析經由CoventorWare軟體，針對機械、熱、電等性質進行模擬，於1 V下，鑷子具有尖端位移445 μm及最大溫度390 K的模擬值，同時也藉由模擬進行鑷子的最佳化設計，探討冷臂與熱臂的寬度及厚度、連接臂長度、冷臂與撓性臂比例對元件位移、最大溫度、最大溫度位置及尖端溫度的影響。
此外，將鑷子與支撐柱進行組裝，形成具有單一自由度運動的元件，元件受外部磁場影響而轉動，外部磁場由電磁鐵提供，當結構與電磁鐵距離約1.57 mm時，對電磁鐵輸入6.3 A的電流，方能使結構轉動，透過電磁鐵電流與有效距離量測，可得到不同距離下，結構轉動所需的電流。 | zh_TW |
| dc.description.abstract |
In this research, we proposed a rapid fabrication process for miniaturizing the electro-thermal grippers by using silver ink. With this process, we fabricated the one degree-of-freedom micro-grippers which can be controlled by external magnetic field.
Due to cross-sectional area difference of the cold and hot arms, the micro-gripper can be driven by applying dc voltages. Electrical, thermal and mechanical behaviors of the micro-grippers were simulated and tested, and the simulation results were in accordance with the experiment results. The simulated maximum temperature was 390 K, meanwhile in-plane tip displacement was 445 -μm, and occurred at the hot arms with an input voltage of 1 V. The measured displacement of the micro-gripper was observed to be 441 μm. The fabricated micro-gripper can grip a small glass ball with a diameter of 1 mm between both tips.
In the end, we applied magnetic field to the structure in order to rotate the micro-gripper. An electromagnet generated magnetic field when the electrical current passed through the coils. The result showed that when the distance between the micro-grippers and electromagnet is about 1.57 mm, the micro-grippers rotated with an input current of 6.3 A. | en_US |
| DC.subject | 電熱式 | zh_TW |
| DC.subject | 微型鑷子 | zh_TW |
| DC.subject | 銀膠 | zh_TW |
| DC.subject | 磁場 | zh_TW |
| DC.subject | 單一自由度 | zh_TW |
| DC.subject | electrothermal | en_US |
| DC.subject | microgripper | en_US |
| DC.subject | silver ink | en_US |
| DC.subject | magnetic field | en_US |
| DC.subject | 1 DOF | en_US |
| DC.title | 單一自由度微型電熱鑷子之設計與分析 | zh_TW |
| dc.language.iso | zh-TW | zh-TW |
| DC.type | 博碩士論文 | zh_TW |
| DC.type | thesis | en_US |
| DC.publisher | National Central University | en_US |