| DC 欄位 |
值 |
語言 |
| DC.contributor | 機械工程學系 | zh_TW |
| DC.creator | 陳郁輔 | zh_TW |
| DC.creator | Yuh-Fu Chen | en_US |
| dc.date.accessioned | 2016-8-23T07:39:07Z | |
| dc.date.available | 2016-8-23T07:39:07Z | |
| dc.date.issued | 2016 | |
| dc.identifier.uri | http://ir.lib.ncu.edu.tw:88/thesis/view_etd.asp?URN=103323111 | |
| dc.contributor.department | 機械工程學系 | zh_TW |
| DC.description | 國立中央大學 | zh_TW |
| DC.description | National Central University | en_US |
| dc.description.abstract | 本文以實驗方式探討超音波振動輔助對於等通道彎角擠製(ECAE)之影響。本文超音波加載方式分為軸向加載、橫向加載及組合雙軸向加載，以最大成形力、成形總能量及平均成形力三個觀點比較不同沖頭行程位置加載超音波振動的影響。
本文並進行超音波拉伸實驗，取得超音波振動下材料拉伸數據，建立材料在超音波加載狀況下的塑性應力-應變關係式。並利用所得之材料參數，進行有限元素模擬分析，驗證有線元素模擬對於超音波輔助加載ECAE之可行性。
實驗結果顯示，在超音波輔助ECAE製程中，不論是單獨施加軸向、橫向或是同時雙軸向加載，對於降低成型力均有良好的效應。利用有限元素模擬分析，調整有限元素模型內的材料性質建立其等效模型，提出超音波軟化及摩擦力減少兩種機制皆存在於超音波輔助ECAE的製程中。 | zh_TW |
| dc.description.abstract | This study aims to explore experimentally the influence of ultrasonic vibration on equal channel angular extrusion (ECAE).The ultrasonic system divided in axial direction, lateral direction and both two direction. Use the maximum forming force, maximum total energy and average forming force to compare the effects of ultrasonic vibration.
In this paper, applying ultrasonic vibration in tensile test. Establish material plastic stress - strain relationship with ultrasonic vibration. Also in Deform-3D finite element software to analyze the equal channel angular extrusion(ECAE) that applied with the ultrasonic vibration.
The experimental results shows that ultrasonic vibration on ECAE, whether in axial direction, lateral direction or simultaneous biaxial loading, for lower forming force and enhance the hardness of the specimen both have good effect. Using the finite element to analyze, adjust the contact conditions and material properties of finite element model to build the equivalent model. Putting forward the acoustic softening and friction reduction are both may exist in process of ultrasonic vibration on ECAE. | en_US |
| DC.subject | 超音波 | zh_TW |
| DC.subject | 等通道彎角擠製 | zh_TW |
| DC.title | 超音波對1070鋁合金等通道彎角擠製加工及其材料行為效應之研究 | zh_TW |
| dc.language.iso | zh-TW | zh-TW |
| DC.type | 博碩士論文 | zh_TW |
| DC.type | thesis | en_US |
| DC.publisher | National Central University | en_US |