博碩士論文 106353018 完整後設資料紀錄

DC 欄位 語言
DC.contributor機械工程學系在職專班zh_TW
DC.creator陳亦新zh_TW
DC.creatorCHEN YI HSINen_US
dc.date.accessioned2019-7-30T07:39:07Z
dc.date.available2019-7-30T07:39:07Z
dc.date.issued2019
dc.identifier.urihttp://ir.lib.ncu.edu.tw:88/thesis/view_etd.asp?URN=106353018
dc.contributor.department機械工程學系在職專班zh_TW
DC.description國立中央大學zh_TW
DC.descriptionNational Central Universityen_US
dc.description.abstract本研究以電梯使用之液壓緩衝器為模擬研究對象,近年來住宅區 大樓有越蓋越高的趨勢,高樓層電梯之市場需求有明顯成長,對於中 高樓層大樓電梯之走行距離較長,運行速度較快,須使用中高速電梯 來滿足快速載運的目的。 中高速電梯在機坑中須使用液壓緩衝器,其原因是電梯運行需求 速度較快,彈簧式緩衝器已無法滿足衝擊需求,藉由液壓緩衝器的特 性與能力來吸收電梯下衝之加速度,做為電梯安全的最後一道防線。 液壓緩衝器大致分為芯軸式液壓緩衝器與多孔式液壓緩衝器,原 理皆為利用流體的節流效應來吸收衝擊力,首先利用彈簧力使衝擊頭 保持復位狀態,衝擊頭受衝擊後利用活塞推擠液體使液體通過節流孔 ,緩和所受之衝擊力,本研究以多孔式液壓緩衝器為模擬研究對象, 使用 FLUENT 軟體,對多孔式液壓緩衝器之孔徑與孔距進行研究與分 析。zh_TW
dc.description.abstractIn this study, the hydraulic buffer used in elevators is used as a simulation research object. In recent years, the residential area building has a higher and higher trend. The market demand for high-floor elevators has grown significantly. For the medium and high-rise buildings, the elevator travel distance is long and the running speed is high. Faster, medium and high speed elevators are required to meet the purpose of fast carrying. The medium and high speed elevators must use hydraulic buffers in the pits. The reason is that the elevators need to run faster. The spring buffers can no longer meet the impact demand. The characteristics and capabilities of the hydraulic buffers absorb the acceleration of the elevator undershoot. The last line of defense for the safety of the elevator. The hydraulic damper is roughly divided into a mandrel type hydraulic damper and a porous hydraulic damper. The principle is to use the throttling effect of the fluid to absorb the impact force. First, the impact head is kept in a reset state by the spring force, and the impact head is utilized after being impacted. The piston pushes the liquid to make the liquid pass through the orifice to alleviate the impact force. In this study, iv the porous hydraulic shock absorber is used as the simulation object. Using the FLUENT software, the aperture and the hole spacing of the porous hydraulic shock absorber are studied and analyzed.en_US
DC.subject液壓緩衝器zh_TW
DC.subject多孔式zh_TW
DC.subject流力分析zh_TW
DC.subject動態模擬分析zh_TW
DC.subject:Hydraulic shock absorberen_US
DC.subjectmulti-holeen_US
DC.subjectFLUENTen_US
DC.subjectdynamic simulation analysisen_US
DC.title電梯用多孔式液壓緩衝器液態流動模擬分析zh_TW
dc.language.isozh-TWzh-TW
DC.titleSimulation Analysis Liquid Flow of Porous Hydraulic Buffer for Elevatoren_US
DC.type博碩士論文zh_TW
DC.typethesisen_US
DC.publisherNational Central Universityen_US

若有論文相關問題,請聯絡國立中央大學圖書館推廣服務組 TEL:(03)422-7151轉57407,或E-mail聯絡  - 隱私權政策聲明