| DC 欄位 |
值 |
語言 |
| DC.contributor | 通訊工程學系 | zh_TW |
| DC.creator | 王又意 | zh_TW |
| DC.creator | You-Yi Wang | en_US |
| dc.date.accessioned | 2021-8-17T07:39:07Z | |
| dc.date.available | 2021-8-17T07:39:07Z | |
| dc.date.issued | 2021 | |
| dc.identifier.uri | http://ir.lib.ncu.edu.tw:88/thesis/view_etd.asp?URN=106523033 | |
| dc.contributor.department | 通訊工程學系 | zh_TW |
| DC.description | 國立中央大學 | zh_TW |
| DC.description | National Central University | en_US |
| dc.description.abstract | 以SDR平台實現FSK無線通訊收發機，其中通道編碼的部分使用渦輪碼，並在發射機部分以4FSK進行調變，且在其中加入前置訊號方便接收機做時間同步。在軟體模擬部分用可加性高斯白雜訊(Additive white Gaussian noise，AWGN)通道來模擬其效能，確定接收機能夠順利解回訊號，再實現於FPGA驗證版上，並將其結果導入Matlab軟體中做確認，確定每個模組都能順利解回訊號。 | zh_TW |
| dc.description.abstract | The FSK wireless communication transceiver is realized on the SDR platform, in which the channel coding part uses turbo code, and the transmitter part is modulated by 4FSK, and the pre-signal is added to facilitate the receiver to synchronize the time. In the software simulation part, the additive white Gaussian noise (AWGN) channel is used to simulate its performance, to make sure that the receiver can decode the signal smoothly, and then implement it on the FPGA verification version, and import the result into the Matlab software Confirm in the process to make sure that each module can resolve the signal smoothly. | en_US |
| DC.subject | FSK | zh_TW |
| DC.subject | 渦輪碼 | zh_TW |
| DC.subject | FPGA硬體實現 | zh_TW |
| DC.title | 以軟體定義無線電平台設計與實現4-FSK叢發通訊收發機 | zh_TW |
| dc.language.iso | zh-TW | zh-TW |
| DC.title | Design and Implementation of a 4-FSK Burst Communication Transceiver with SDR | en_US |
| DC.type | 博碩士論文 | zh_TW |
| DC.type | thesis | en_US |
| DC.publisher | National Central University | en_US |