博碩士論文 107323054 完整後設資料紀錄

DC 欄位 語言
DC.contributor機械工程學系zh_TW
DC.creator李仁傑zh_TW
DC.creatorJen-Chieh Lien_US
dc.date.accessioned2020-7-29T07:39:07Z
dc.date.available2020-7-29T07:39:07Z
dc.date.issued2020
dc.identifier.urihttp://ir.lib.ncu.edu.tw:88/thesis/view_etd.asp?URN=107323054
dc.contributor.department機械工程學系zh_TW
DC.description國立中央大學zh_TW
DC.descriptionNational Central Universityen_US
dc.description.abstract常壓化學氣相沉積矽磊晶反應腔體內的溫度分布,對於磊晶製程非常重要,本研究針對反應腔體加熱系統進行改善分析。磊晶生長過程藉由上下兩組燈泡模組透過熱輻射將熱量傳遞至晶圓表面,這些模組包括燈絲加熱器、黃金反射罩、晶圓載盤、石英集熱環和冷卻系統等,本文藉由建立熱傳數值模型分析此磊晶反應腔體內傳熱過程,進而改善溫場分布來得到較佳的薄膜生長均勻性。 當矽磊晶薄膜在生長時,由於載盤上矽晶圓的溫場對於磊晶生長有相當大的影響,而影響矽晶圓溫場的因素,包括腔體內傳熱機制與腔體幾何結構。本研究先建立三維數值模型,再以數值模擬方式求出磊晶腔體及晶圓表面溫度分布,依製程溫度約為1050-1150℃,求得輸入功率。溫場的分布,將會影響矽磊晶薄膜生長輪廓、薄膜沉積速率與平坦度。溫場分布受到黃金反射罩、集熱環的幾何形狀和位置及上下加熱器輸入功率比的影響,利用上述方式來控制晶圓表面區域溫度找出適合矽磊晶生長之溫場以提高薄膜生長均勻性。本研究將提出加熱系統內改善的腔體結構如黃金反射罩與石英集熱環等。zh_TW
dc.description.abstractIt is known that temperature distribution in the silicon epitaxial process is meaningful to the atmospheric pressure chemical vapor deposition(APCVD) system. This study is to develop and optimize the silicon epitaxial heating system. The epitaxial growth process transfers heat to the wafer surface through thermal radiation by the lamp modules located in the chamber. The chamber consists of many different components, including filament heaters, golden reflectors, susceptor, quartz ring and cooling system, etc. This study analyzes the heat transfer process of the silicon epitaxial deposition chamber by establishing the numerical heat transfer model, and then improves the temperature field distribution to obtain better film growth uniformity. When the silicon epitaxial thin film is growing, the temperature field of the wafer on the substrate has a considerable influence on the epitaxial growth, and the temperature field is affected by the heat transfer mechanism in the chamber and the geometry of the chamber. In this study, the three-dimensional numerical model was first established, and then the temperature distribution of the epitaxial cavity and the wafer surface is obtained by numerical simulation. The input power is obtained by the real process temperature which is about 1050-1150°C. The distribution of the temperature field will affect the silicon epitaxial film growth profile, film deposition rate and flatness. The temperature field distribution is affected by the geometry and position of the golden reflectors, quartz ring, and the input power ratio of the upper and lower heaters. The above method is used to control the temperature of different area on the wafer surface in order to acquire a temperature field suitable for silicon epitaxial growth to improve film growth uniformity. This study will propose improved chamber structures in the heating system, such as golden reflectors and quartz ring.en_US
DC.subject矽磊晶薄膜生長zh_TW
DC.subject熱輻射加熱zh_TW
DC.subject常壓化學氣相沉積zh_TW
DC.subjectSilicon epitaxial filmen_US
DC.subjectRadiation heateren_US
DC.subjectAtmospheric pressure chemical vapor depositionen_US
DC.title12英吋矽晶圓化學氣相沉積矽磊晶製程熱輻射加熱系統之數值分析zh_TW
dc.language.isozh-TWzh-TW
DC.titleNumerical Analysis of Heat Radiation Heating System for 12-inch Silicon Wafer Chemical Vapor Deposition Silicon Epitaxial Processen_US
DC.type博碩士論文zh_TW
DC.typethesisen_US
DC.publisherNational Central Universityen_US

若有論文相關問題,請聯絡國立中央大學圖書館推廣服務組 TEL:(03)422-7151轉57407,或E-mail聯絡  - 隱私權政策聲明