| DC 欄位 |
值 |
語言 |
| DC.contributor | 電機工程學系 | zh_TW |
| DC.creator | 吳晨瑞 | zh_TW |
| DC.creator | CHEN-RUI,WU | en_US |
| dc.date.accessioned | 2023-7-11T07:39:07Z | |
| dc.date.available | 2023-7-11T07:39:07Z | |
| dc.date.issued | 2023 | |
| dc.identifier.uri | http://ir.lib.ncu.edu.tw:88/thesis/view_etd.asp?URN=110521152 | |
| dc.contributor.department | 電機工程學系 | zh_TW |
| DC.description | 國立中央大學 | zh_TW |
| DC.description | National Central University | en_US |
| dc.description.abstract | 本論文提出了一種基於石英製程的50-110 GHz漸變開槽天線設計。該天線採用石英基板，並通過CPW-CPS饋入方式，利用漸變開槽產生50-110 GHz的寬頻輻射模式。選擇漸變開槽是因為它具有高增益和寬頻特性。天線設計中使用了國家半導體研究中心提供的石英製程，石英基板的介電常數為3.79，切損耗為0.0006，並與BCB半導體介質（介電常數為2.65，切損耗為0.001）結合使用。該製程提供了4層金屬層用於設計。為了保持平面性，天線和CPW-CPS結構都設計在同一層金屬上。而驗證CPW-CPS過渡設計的有效性為使用背對背方式進行測試。針對單一天線設計中高頻相位不均勻的問題，在天線板端前緣添加了寄生元件，以改善相位分佈並提高高頻增益。在1×2天線陣列設計中，採用一分二的T-Junction饋電結構，模擬結果顯示單一天線和天線陣列均實現了50-110 GHz的寬頻特性。通過優化下的設計，本論文實現了具有高增益和寬頻特性的50-110 GHz漸變開槽天線，為高頻通訊和雷達系統等應用提供了一種有效的解決方案。 | zh_TW |
| dc.description.abstract | The thesis presents the design of 50-110 GHz Tapered slot antennas using a quartz-based fabrication process. The proposed design utilizes a quartz substrate and employs CPW-CPS feeding to achieve a wideband radiation. The choice of Tapered slot is motivated by its wideband characteristics.
The quartz fabrication process provided by the National Semiconductor Research Center is utilized. The quartz substrate has a dielectric constant of 3.79 and a loss tangent of 0.0006. It is combined with the BCB semiconductor material, which has a dielectric constant of 2.65 and a loss tangent of 0.001. The process allows for the utilization of four metal layers in the design. To maintain planarity, both the antenna and the CPW-CPS structure are designed on the same metal layer. The CPW-CPS transition design is verified through back-to-back measurements. To address the issue of non-uniform phase distribution in the single antenna design at high frequencies, parasitic elements are added at the front edge of the antenna substrate to improve phase distribution and enhance high-frequency gain.
In the design of a 1x2 antenna array, a one-to-two T-Junction feeding structure is employed, and simulation results demonstrate that both the single antenna and the antenna array achieve a wideband performance from 50 to 110 GHz.
By optimizing the design using the quartz fabrication process, the thesis successfully realizes a 50-110 GHz Tapered slot antenna with high gain and wideband characteristics. This provides an effective solution for applications such as high-frequency communication and radar systems. | en_US |
| DC.subject | 石英製程 | zh_TW |
| DC.subject | 漸變開槽天線 | zh_TW |
| DC.subject | 寬頻天線 | zh_TW |
| DC.subject | 增益優化 | zh_TW |
| DC.subject | Quartz Substrate Integrated Passive Device (IPD) Process | en_US |
| DC.subject | Tapered slot Antenna | en_US |
| DC.subject | Broadband antenna | en_US |
| DC.subject | Gain enhancement | en_US |
| DC.title | 利用石英製程之50-110 GHz 漸變開槽天線設計 | zh_TW |
| dc.language.iso | zh-TW | zh-TW |
| DC.title | Design of 50-110 GHz Tapered slot Antenna Using Quartz Substrate Integrated Passive Device (IPD) Process | en_US |
| DC.type | 博碩士論文 | zh_TW |
| DC.type | thesis | en_US |
| DC.publisher | National Central University | en_US |