博碩士論文 83246005 完整後設資料紀錄

DC 欄位 語言
DC.contributor光電科學與工程學系zh_TW
DC.creator孫文信zh_TW
DC.creatorWen-Shing Sunen_US
dc.date.accessioned2002-1-21T07:39:07Z
dc.date.available2002-1-21T07:39:07Z
dc.date.issued2002
dc.identifier.urihttp://ir.lib.ncu.edu.tw:88/thesis/view_etd.asp?URN=83246005
dc.contributor.department光電科學與工程學系zh_TW
DC.description國立中央大學zh_TW
DC.descriptionNational Central Universityen_US
dc.description.abstract本論文將探討一種優化方法,特別著重厚透鏡的三階像差公式,做為優化過程的評價函數,並在雙片鏡組與三片鏡組的設計上,得到很好的優化效果。 論文中也探討眼鏡片的設計,由於單片眼鏡片設計優化項次的變數單純,故以柯丁登方程式作為評價依據,並按低折光率與高折光率眼鏡片分別設計。在低折光率眼鏡片設計,以斜射像散與鏡面深度對鏡面高度之二次微分值,校正鏡片像差與控制鏡面反曲點,可得比傳統鏡片,輕、薄和平的鏡片設計。高折光率眼鏡片設計,使用兩面非球面,優化目標項次為多視場斜射像散、折光率誤差與畸變,控制鏡片光學品質。 論文中厚透鏡三階像差是以形狀因子之一元三次方程式表示,我們利用優化績效函數,可控制厚透鏡三階像差至任意目標值,因此可由厚透鏡三階像差找出真實像差減少趨勢,利用此趨勢,我們完成一自動化優化程式,得出一最佳值。 為驗證優化程式效果,我們比較傳統標準鏡組設計之效果,均能得到更為優異之像差消除值。zh_TW
dc.description.abstractAn novel optimization algorithm for optical lens design is presented in this dissertation. The third-order aberration of a thick lens is used as the merit function in the optimization. Accordingly, we have obtained well design results in designing both of the triplet and the doublet lenses. The study of the design of an ophthalmic lens is another topic of this dissertation. We used the Coddington’’s equations as the merit functionin in designing both low-power and high-power ophthalmic lenses because only one piece of lens should be considered in design. In the low-power ophthalmic lenses design, we use the oblique astigmatic and the second derivative with respect to the height to correct lens aberration as well as control the inflection point. In comparison with the traditional ophthalmic lenses, this approach can obtain a lighter, thinner and flatter spectacle lens. In addition, the design of high-power in aspherical ophthalmic lenses is presented. Using two aspherical surfaces to control the optical lenses quality, multi-fields oblique astigmatism and oblique power error and distortion are choose as the target budgets. The minimal aberration can be obtained by optimizing the two aspherical surfaces. The third-order aberration for a thick lens is in terms of shape factors by cubic equation with one unknown. we used the merit function to control the third-order aberrations to any target budgets. The trend for the real aberration in decreasing could be obtained by the third-order aberration of a thick lens. Finally, we develop a set of automatic optimization program to find an optimized value. The developed optimization program has been proven to be effective. For this study, the specified aberrations of the lenses design were corrected to reach a minimum value, which was more better than those for conventional lenses design.en_US
DC.subject眼鏡片zh_TW
DC.subject遠視zh_TW
DC.subject近視zh_TW
DC.subject阻尼最小二乘法zh_TW
DC.subject雙片鏡組zh_TW
DC.subject三片鏡組zh_TW
DC.subject全領域最佳值設計zh_TW
DC.subjectOphthalmic lensen_US
DC.subjectHypermetropiaen_US
DC.subjectMyopiaen_US
DC.subjectDamped least square methoden_US
DC.subjectDoubleten_US
DC.subjectTripleten_US
DC.subjectOptimization design over full fielden_US
DC.title精調三階像差各分項目標值的鏡組優化設計zh_TW
dc.language.isozh-TWzh-TW
DC.titleOptical lens design optimization with accuracy adjusting the target budgets of the third-order aberrationsen_US
DC.type博碩士論文zh_TW
DC.typethesisen_US
DC.publisherNational Central Universityen_US

若有論文相關問題,請聯絡國立中央大學圖書館推廣服務組 TEL:(03)422-7151轉57407,或E-mail聯絡  - 隱私權政策聲明