博碩士論文 88323003 完整後設資料紀錄

DC 欄位 語言
DC.contributor機械工程研究所zh_TW
DC.creator江佩如zh_TW
DC.creatorPei-Ru Jiangen_US
dc.date.accessioned2001-6-27T07:39:07Z
dc.date.available2001-6-27T07:39:07Z
dc.date.issued2001
dc.identifier.urihttp://ir.lib.ncu.edu.tw:88/thesis/view_etd.asp?URN=88323003
dc.contributor.department機械工程研究所zh_TW
DC.description國立中央大學zh_TW
DC.descriptionNational Central Universityen_US
dc.description.abstract本文以數位訊號處理器(DSP)為主體設計一訊號量測卡,主要量測感測元(Load Cell)的訊號來架設電子秤,本卡在電路與韌體搭配規劃下,對微小電壓之類比訊號進行取樣,並針對系統選擇適當的工作模式和採樣頻率,以取得系統完整的動態響應,隨後將數位訊號傳回DSP。 接著將所得到的動態響應做系統鑑別,本文以最小平方遞迴法(Recursive Least Square)來求取系統的動態參數,並依所得參數重建系統動態,之後再和原來的訊號做比較,此外,和平均法比較穩定值的預測結果,證明了RLS預測上的效率比平均法好。zh_TW
dc.description.abstractIn this study DSP play an important role in signal-measure-card designed for the load cell in weighing system. The design in circuit and firmware of this signal-measure-card is focused on measuringmicro-voltage. In order to get a complete dynamic shape, users can instruct DSP to choose proper sampling frequency and gains to resolve analog signals into digital ones. After A/D converting, the data will be transmitted and processed by DSP. Since getting complete information of dynamic, Recursive Least Square is used for system Identification. In this study, the dynamic shape rebuilt by parameter got from system ID is compared with the original dynamic one. Besides, RLS and Mean-method are used for estimating the stable value of weigher, and the result is that RLS is more speedy and useful than Mean-method.en_US
DC.subjectAD7715zh_TW
DC.subject DSPzh_TW
DC.subject 平均法zh_TW
DC.subject 感測元zh_TW
DC.subject 系統鑑別zh_TW
DC.subject 訊號量測zh_TW
DC.subject 遞迴最小平方法zh_TW
DC.subject 電子秤zh_TW
DC.subjectLoad Cellen_US
DC.subject RLSen_US
DC.title加速電子秤讀取之硬體設計與系統鑑別 zh_TW
dc.language.isozh-TWzh-TW
DC.type博碩士論文zh_TW
DC.typethesisen_US
DC.publisherNational Central Universityen_US

若有論文相關問題,請聯絡國立中央大學圖書館推廣服務組 TEL:(03)422-7151轉57407,或E-mail聯絡  - 隱私權政策聲明