博碩士論文 89236002 完整後設資料紀錄

DC 欄位 語言
DC.contributor光電科學研究所碩士在職專班zh_TW
DC.creator羅世奎zh_TW
DC.creatorShih-Kuei Loen_US
dc.date.accessioned2003-1-27T07:39:07Z
dc.date.available2003-1-27T07:39:07Z
dc.date.issued2003
dc.identifier.urihttp://ir.lib.ncu.edu.tw:88/thesis/view_etd.asp?URN=89236002
dc.contributor.department光電科學研究所碩士在職專班zh_TW
DC.description國立中央大學zh_TW
DC.descriptionNational Central Universityen_US
dc.description.abstract本論文提出一種新的方法來製備有機電激發光元件;此方法為在元件蒸鍍完適當厚度的鋁金屬陰電極後,以RF 電漿轟擊鋁金屬陰電極,使金屬電極形成一原金屬以及其自身氧化物層之複合結構,實驗結果顯示,以本方法可降低元件因殘留於基板表面粉塵(dust)所造成之漏電流,進而消除cross talk的問題。此元件結構的優點為在現有的製程環境下,無需添購其他的設備,即可提高元件之整流比(rectification ratio);除此之外,適當的金屬氧化層還可作為保護層,以避免元件因外界環境的侵蝕而損壞。zh_TW
dc.description.abstractThe research paper is to raise a new process to modify organic light emitting display (OLED) and to produce a no cross talk display .The advantage of this process is more simple, no need to purchase any new equipment. This device with a multi-electrode contains a pure Al layer and its own oxidation layer. This process can modify device with O2 plasma and produce an oxidation layer on present Al metal. It can reduce device causing leakage current due to dust residue under surface of substrate and increase the rectification ratio. This oxidation layer can be a protection layer and avoid any damage caused by outside circumstance.en_US
DC.subject被動式有機電激發光面板zh_TW
DC.subject有機電激發光元件zh_TW
DC.subjectELectroluminescence displayen_US
DC.subjectcross talken_US
DC.subjectleakage currenten_US
DC.subjectOLEDen_US
DC.title有機電激發光元件鋁金屬陰電極厚度之影響zh_TW
dc.language.isozh-TWzh-TW
DC.type博碩士論文zh_TW
DC.typethesisen_US
DC.publisherNational Central Universityen_US

若有論文相關問題,請聯絡國立中央大學圖書館推廣服務組 TEL:(03)422-7151轉57407,或E-mail聯絡  - 隱私權政策聲明