dc.description.abstract | The main purpose of this thesis is to hope to electro-plating 3D micro-structure (like small components of three-dimensional space , such as little spring , in charge of hollowly ,etc.), and set about studying the feasibility that " 3D micro electro-plating " , develop anode guided 3D micro electro-plating system for this goal. This system use the structure of the module , can subdivide into three major module : Three axles electroplate mechanic-platform , anode guided micro electro-plating module , and control program . After the operation of the system, the user can give electroplate instructions to anode guided 3D micro electro-plating hardware through interface of control program, the anode guided 3D micro electro-plating the system after finishing electroplate instructions or finishing the specific procedure , communication interface of the system will receive electroplate- information and show on control program interface .
It is explain and introduced how every module of the system is designed、planned and program is coded . On electroplating-experiment that the anode guided 3D micro electro-plating function is verified and proves server current mode or server voltage mode to electroplating micro-structure , finally , verify the feasibility of " electroplate 3D micro-structure ". | en_US |