博碩士論文 92523017 完整後設資料紀錄

DC 欄位 語言
DC.contributor通訊工程學系zh_TW
DC.creator林宗賢zh_TW
DC.creatorZong-Sian Linen_US
dc.date.accessioned2005-7-20T07:39:07Z
dc.date.available2005-7-20T07:39:07Z
dc.date.issued2005
dc.identifier.urihttp://ir.lib.ncu.edu.tw:88/thesis/view_etd.asp?URN=92523017
dc.contributor.department通訊工程學系zh_TW
DC.description國立中央大學zh_TW
DC.descriptionNational Central Universityen_US
dc.description.abstract摘要 IEEE802.11a 系統是一無線傳輸的通訊系統,使用正交分頻多工調變(Orthogonal Frequency Division Multiplexing,OFDM)來增加傳輸的頻寬效益, 也具有一般OFDM 系統所包含的多重路徑干擾(Multipath Channel)、載波頻率偏移(Carrier Frequency Offset) 等問題。 本篇論文利用FPGA 實現IEEE 802.11a 實體層,並在演算法方面探討載波頻率偏移、時序偏移、以及多重路徑干擾對於接收端的影響,也加入通道追蹤(Channel Tracking)模組來增進系統的效能。我們先以VHDL 驗證完成後,再以Xilinx FPGA 及邏輯分析儀作整體硬體上的驗證與分析,最後得到理論與實現上之印證。zh_TW
dc.description.abstractAbstract IEEE802.11a is a wireless communication system based on Orthogonal Frequency Division Multiplexing (OFDM) modulation to increase the bandwidth efficiently. As a general OFDM system, it also suffers from inter-carrier interference (ICI) and the inter-symbol interference (ISI) caused by the multipath channel, carrier frequency offset…, etc. This thesis implements the IEEE 802.11a physical layer on FPGA and explores the carrier frequency offset, timing offset, and the effect caused by multipath channels in the algorithm-level. The channel tracking module is also included to improve the system performance. The VHDL design is verified by the FPGA board. The LA (Logic Analyzer) is used to grab the output data for analysis to achieve a comprehensive study.en_US
DC.subject正交分頻多工zh_TW
DC.subject無線接收機zh_TW
DC.subject通道追蹤zh_TW
DC.subjectOFDMen_US
DC.subjectWireless LANen_US
DC.subject802.11aen_US
DC.subjectChannel Trackingen_US
DC.title包含通道追蹤之IEEE 802.11a接收機設計與電路實現zh_TW
dc.language.isozh-TWzh-TW
DC.titleDesign and Implementation of the IEEE 802.11a Receiver with Channel Trackingen_US
DC.type博碩士論文zh_TW
DC.typethesisen_US
DC.publisherNational Central Universityen_US

若有論文相關問題,請聯絡國立中央大學圖書館推廣服務組 TEL:(03)422-7151轉57407,或E-mail聯絡  - 隱私權政策聲明