博碩士論文 93323074 完整後設資料紀錄

DC 欄位 語言
DC.contributor機械工程學系zh_TW
DC.creator黃家麒zh_TW
DC.creatorCha-Chi Huangen_US
dc.date.accessioned2006-7-8T07:39:07Z
dc.date.available2006-7-8T07:39:07Z
dc.date.issued2006
dc.identifier.urihttp://ir.lib.ncu.edu.tw:88/thesis/view_etd.asp?URN=93323074
dc.contributor.department機械工程學系zh_TW
DC.description國立中央大學zh_TW
DC.descriptionNational Central Universityen_US
dc.description.abstract摘要 雷射干涉微影(Laser Interference Lithography)只須簡單的光學鏡組及雷射光源,且不須通過光罩,便可由此系統得到一維條紋及二維點陣或洞陣的週期性結構。此系統的優點在於擁有極大的聚焦深度、易於大面積曝光、低成本、高解析度。 四道光單曝光除了有干涉微影的優點外,更有著高產能、高對比度、以及易形成深孔等優勢。因此,本研究將建立四道光單曝光強度分佈之數學模型並進行相關實驗,由實驗結果分析得知,在相同曝光與顯影參數下,四道光單曝光將會使光強重新分配,使得其所得到的微結構比兩道光雙曝光之結構更為尖銳(sharper)。 另外,隨著曝光時間與顯影時間的增加,結構的特徵尺寸將會縮小,高度上亦將有所變化。本研究在適當的曝光與顯影參數下,利用ICP乾蝕刻成功地在矽基板上得到四道光單曝光所建構出的二維週期性陣列結構。zh_TW
dc.description.abstractAbstract In this research, we have developed laser interference lithography system, such as one dimension linear gratings or two dimension arrays of dots and grids, to create periodical structures. The method of maskless laser interference lithography used for generation of infinite depth of focus, relative simplicity, low cost, deep sub-micron patterns and high resolution in large field of view is investigated. The main advantage of four-beam exposure is that higher throughput process for patterning arrays and higher contrast images can be obtained. According to theoretical analysis and experimental results, four-beam exposure allows a greater percentage of the incident energy to be redistributed near the intensity maxima and generates structures sharper. The effects of the process parameters on the shape and depth of the structure have been discussed. According to different critical dimension, this thesis also suggests several parameters for exposure and development, with which best pattern had been acquired in our experiments.en_US
DC.subject雷射干涉微影zh_TW
DC.subject四道光曝光zh_TW
DC.subjectfour-beam exposureen_US
DC.subjectlaser interference lithographyen_US
DC.title四道光干涉微影之曝光與顯影參數對 微結構輪廓及深度之探討zh_TW
dc.language.isozh-TWzh-TW
DC.titleThe influences of exposure and development parameters on the shape and depth of micro-structure for four-beam interferometric lithography en_US
DC.type博碩士論文zh_TW
DC.typethesisen_US
DC.publisherNational Central Universityen_US

若有論文相關問題,請聯絡國立中央大學圖書館推廣服務組 TEL:(03)422-7151轉57407,或E-mail聯絡  - 隱私權政策聲明