| DC 欄位 |
值 |
語言 |
| DC.contributor | 電機工程學系 | zh_TW |
| DC.creator | 莊政達 | zh_TW |
| DC.creator | Cheng-Ta Chuang | en_US |
| dc.date.accessioned | 2006-7-3T07:39:07Z | |
| dc.date.available | 2006-7-3T07:39:07Z | |
| dc.date.issued | 2006 | |
| dc.identifier.uri | http://ir.lib.ncu.edu.tw:88/thesis/view_etd.asp?URN=93521117 | |
| dc.contributor.department | 電機工程學系 | zh_TW |
| DC.description | 國立中央大學 | zh_TW |
| DC.description | National Central University | en_US |
| dc.description.abstract | 雙足機器人發展至今，不自然的機械步態依然沒有多大改變，且關節處都需要驅動器來提供動力，所以在耗能上是相當大的，若要做出更流暢的步行動作，其動作規畫與控制複雜度就越高。基於這些問題，本論文的雙足機器人，使用被動動力設計的概念，依靠重力、慣性、AI 馬達來提供動力，其膝蓋無驅動動力，僅提供可控制的電磁鎖，行走時運用馬達帶動上半身左右偏擺，配合腳踝馬達拉往側方的機制，藉此產生行走時所需的重心偏移，小腿則經由大腿連動產生的慣性向前踢出，以類似人類行走步態的方式，不需仰賴所有關節的馬達，在準確時間點做出控制，只需對必要的驅動器控制即可，對於控制和計算的複雜度可以降低，能量的消耗也能較其他類型步行機器人低。論文的雙足機器人，站立時高約90cm、重約4Kg，共有9 個自由度，以 PC-Based 為初期的開發架構，經由 RS-232 控制 AI 馬達建構行走策略，最後在以 DSP 將系統晶片化，達成獨立行走的目標，實現高效率和自然擺動的雙足機器人系統。 | zh_TW |
| dc.description.abstract | A biped robot has been developed for a long time and it still doesn’thave much change of the unnatural machine gait. It consumes a lot of energy because all joints are needed actuators to act. However, it will be more complicated if we want the robot to walk smoothly. For this reason, the biped robot we design uses the concept of passive dynamic walking.The knees of the robot have no actuators but only controllable latches and the robot can walk by gravity, inertial force and the AI motors. The upper body of the robot will swing when it walks forward and have COG shifted by pulling of motor on the ankle. The calf can kick out by the inertial force. It can walk like human being without motors of all joints, and we can only control the necessary actuators at the right timing to make the complication of control and calculations lower. It also consumes less energy compare to other similar robots. The robot which is 90 cm tall, 4kg weight has 9 internal degrees of freedom. At first, we use computer to develop whole system and design control strategy by controlling AI motor through RS-232. Finally, we transfer the system to DSP to let the robot stand alone and have achievement of high-efficiency with natural swing of a biped robot system. | en_US |
| DC.subject | 被動 | zh_TW |
| DC.subject | 雙足機器人 | zh_TW |
| DC.subject | 數位訊號處理器 | zh_TW |
| DC.subject | digit signal processor | en_US |
| DC.subject | biped robot | en_US |
| DC.subject | passive | en_US |
| DC.title | 被動動力設計之雙足機器人 | zh_TW |
| dc.language.iso | zh-TW | zh-TW |
| DC.title | Design and implementation of a biped robot with passive knee joints | en_US |
| DC.type | 博碩士論文 | zh_TW |
| DC.type | thesis | en_US |
| DC.publisher | National Central University | en_US |