博碩士論文 945301005 完整後設資料紀錄

DC 欄位 語言
DC.contributor電機工程學系在職專班zh_TW
DC.creator林志成zh_TW
DC.creatorChi-chen Linen_US
dc.date.accessioned2008-11-23T07:39:07Z
dc.date.available2008-11-23T07:39:07Z
dc.date.issued2008
dc.identifier.urihttp://ir.lib.ncu.edu.tw:88/thesis/view_etd.asp?URN=945301005
dc.contributor.department電機工程學系在職專班zh_TW
DC.description國立中央大學zh_TW
DC.descriptionNational Central Universityen_US
dc.description.abstract在本篇論文中,我們利用計算NBD及NCD之龍捲風模型晶圓圖分析法,針對隨機瑕疵(Random Defect)、製程偏移(Process Variation)及兩者結合所產生之晶圓圖模擬分析,結果發現產生故障晶粒的方法雖不同,但在B-C圖上以NBD為橫軸,NCD為縱軸之龍捲風瑕疵圖樣分佈卻趨於一致。再將七種常見系統性錯誤的晶圓瑕疵圖樣放至晶圓圖分析模型,最後在B-C圖上得到不同的瑕疵圖樣分佈,可見本研究所建立之晶圓圖分析模型,確實可作為一個晶圓瑕疵判讀的檢驗機,並進而達到降低成本、提高效能及良率的目的。zh_TW
dc.description.abstractIn this thesis, we use the tornado model, which counts the total number of bad dice (NBD) and changed directions (NCD) on a wafer amp, to simulate and analyze wafer maps with random defects, process variation and both. It is shown that different sets of wafer maps generated by different types of sources are almost with the same tornado trend in the B-C diagram, where NBD is as x-axis and NCD is as y-axis. Then we analyze seven systematic errors defect pattern in wafer by wafer map analyzing model and get different distribution of defect pattern in B-C diagram. The wafer map analyzing model we set up in this research can indeed be a checker machine which can judge the source of defect in wafer and achieve the goals of cost down and improving the yield rate.en_US
DC.subject製程偏移zh_TW
DC.subject隨機瑕疵zh_TW
DC.subject龍捲風模型zh_TW
DC.subjectProcess Variationen_US
DC.subjectTornado modelen_US
DC.subjectRandom Defecten_US
DC.title一個隨機瑕疵及製程偏移晶圓圖的故障晶粒/方向改變分析圖zh_TW
dc.language.isozh-TWzh-TW
DC.titleABCD: An Analyzing Bad-die/Changed-direction Diagram for Wafer Maps with Random Defect and Process Variationen_US
DC.type博碩士論文zh_TW
DC.typethesisen_US
DC.publisherNational Central Universityen_US

若有論文相關問題,請聯絡國立中央大學圖書館推廣服務組 TEL:(03)422-7151轉57407,或E-mail聯絡  - 隱私權政策聲明