博碩士論文 952206040 完整後設資料紀錄

DC 欄位 值 語言
DC.contributor光電科學與工程學系zh_TW
DC.creator莊秉達zh_TW
DC.creatorPing-Ta Chuangen_US
dc.date.accessioned2008-9-22T07:39:07Z
dc.date.available2008-9-22T07:39:07Z
dc.date.issued2008
dc.identifier.urihttp://ir.lib.ncu.edu.tw:88/thesis/view_etd.asp?URN=952206040
dc.contributor.department光電科學與工程學系zh_TW
DC.description國立中央大學zh_TW
DC.descriptionNational Central Universityen_US
dc.description.abstract本研究利用紫外光照射光子晶體波導，造成光子晶體區域之折射率對比改變，進而產生光能隙位移（bandgap shift），使得操作於能隙邊緣波長的訊號光穿透率大幅下降或者上升，成為一全光開關機制。 實驗上以五氧化二鉭（Ta2O5）作為波導層，並且在波導上製作光子晶體結構；量測上，利用鎖模鈦藍寶石雷射作為入射光源（probe beam）、連續波紫外光作為幫浦光（pump beam），開關對比度達92.98%，未來的研究將著重於開關速度之提升。zh_TW
dc.description.abstractIn this study, we use ultraviolet light as the pump beam to illuminate the waveguide which contains photonic crystal in it. The refractive index change results in the shift of the bandgap of the photonic crystal. The transmission of the signal beam operated at bandedge wavelengths is thereby modulated and all-optical switching is realized. Experimentally, Ta2O5 is used as a material for the waveguide. E-beam lithogography technique is utilized to fabricate the photonic crystal structure in the waveguide. The performed on/off characteristic shows that a transmission contrast as high as 92.98% can be achieved. Future direction of work is discussed aiming at the improvement of the switching speed.en_US
DC.subject全光開關zh_TW
DC.subject單光子吸收zh_TW
DC.subject光能隙位移zh_TW
DC.subject光子晶體zh_TW
DC.subjectall optical switchen_US
DC.subjectsingle photon absorptionen_US
DC.subjectband shiften_US
DC.subjectphotonic crystalsen_US
DC.title利用光子晶體的能隙邊緣移動達成全光開關之研究zh_TW
dc.language.isozh-TWzh-TW
DC.titleThe realization of all-optical switching by shifting of the bandedge of photonic crystalsen_US
DC.type博碩士論文zh_TW
DC.typethesisen_US
DC.publisherNational Central Universityen_US

若有論文相關問題，請聯絡國立中央大學圖書館推廣服務組 TEL:(03)422-7151轉57407，或E-mail聯絡  - 隱私權政策聲明