| DC 欄位 |
值 |
語言 |
| DC.contributor | 機械工程學系在職專班 | zh_TW |
| DC.creator | 潘俊宏 | zh_TW |
| DC.creator | Pan-Chun Hung | en_US |
| dc.date.accessioned | 2008-7-25T07:39:07Z | |
| dc.date.available | 2008-7-25T07:39:07Z | |
| dc.date.issued | 2008 | |
| dc.identifier.uri | http://ir.lib.ncu.edu.tw:88/thesis/view_etd.asp?URN=953303003 | |
| dc.contributor.department | 機械工程學系在職專班 | zh_TW |
| DC.description | 國立中央大學 | zh_TW |
| DC.description | National Central University | en_US |
| dc.description.abstract | 由於筆記型電腦市場走向輕薄短小的趨勢，使用者及客戶對外型以及美觀的要求，所產生設計上的限制，造成熱管以折彎及打扁的方式，透過熱管來有效的解熱，其性能也造成一定的影響。開會時，若將筆記型電腦放於大腿上，造成熱管傾斜方式來解熱，選用不同結構的熱管，來有效解決熱管抗重力的問題。而本實驗是探討不同結構與幾何形狀對熱管性能之影響。
本研究以實驗方法探討不同結構與幾何形狀熱管的效能表現，在傾斜角度正方向0度、30度、60度、90度及負方向0度、30度、60度、90度對熱管性能之影響。實驗時，利用熱電偶量測各元件之溫度計算其熱阻，而熱管性能則以各熱阻值作為判斷的依據。模擬晶片之發熱瓦數有10W 、20W 、40W 及60W。熱管結構包括燒結、溝槽及複合這三種結構。幾何形狀包括直徑5mm(打扁2.5mm)及直徑8mm(打扁3mm)，段差部份包含有無段差0mm及2mm，另外折彎部份包含折彎角度0度、30度、60度、90度。 | zh_TW |
| dc.description.abstract | This research uses experiment method to discuss the different perform-ance of structure and shape Heat-Pipe of geometry. Slope angle from posi-tive direction are 0 degree、30 degree、60 degree、90 degree、-30 degree、-60 degree、-90 degree.Experiment setup thermal-couple to measurement temperature of every components and cal-culate Heat-Pipe heat-resistance, and it is accords to every heat-resistance value to judgments about performance of heat-pipe.
The burning watts have 10W、20W、40W and 60W simulation chip. Heat-pipe structure include three structures sinter、groove and composite. Geometry shape include diameter 8mm(flatten 3mm)and 5mm(flatten 2.5mm),the step part include 0mm and 2mm,another bend part include bend angle 0 degree、30 degree、60 degree、90 degree. | en_US |
| DC.subject | 折彎 | zh_TW |
| DC.subject | 段差 | zh_TW |
| DC.subject | 打扁 | zh_TW |
| DC.subject | 熱管 | zh_TW |
| DC.subject | Heat-Pipe | en_US |
| DC.subject | Flatten | en_US |
| DC.subject | Step | en_US |
| DC.subject | Bend | en_US |
| DC.title | 不同結構與幾何形狀對熱管性能之影響 | zh_TW |
| dc.language.iso | zh-TW | zh-TW |
| DC.title | Effect of geometry and different wick using in the heat pipe | en_US |
| DC.type | 博碩士論文 | zh_TW |
| DC.type | thesis | en_US |
| DC.publisher | National Central University | en_US |