| DC 欄位 |
值 |
語言 |
| DC.contributor | 電機工程學系 | zh_TW |
| DC.creator | 施文郁 | zh_TW |
| DC.creator | Wen-Yu Shih | en_US |
| dc.date.accessioned | 2008-7-14T07:39:07Z | |
| dc.date.available | 2008-7-14T07:39:07Z | |
| dc.date.issued | 2008 | |
| dc.identifier.uri | http://ir.lib.ncu.edu.tw:88/thesis/view_etd.asp?URN=955201032 | |
| dc.contributor.department | 電機工程學系 | zh_TW |
| DC.description | 國立中央大學 | zh_TW |
| DC.description | National Central University | en_US |
| dc.description.abstract | 隨著超大型積體電路(VLSI)的製程進入奈米(nanometer)世代，系統變得越來越複雜，晶片(Chip)的輸入輸出焊墊 (I/O Pads)的個數也隨之增加，而輸入輸出焊墊的擺放位置不僅會影響到封裝上的繞線結果，對晶片內部的壓降值(IR-Drop)也有所影響；目前的研究大多是將上述兩項問題分成封裝與實體設計流程兩步驟來個別處理，但這樣的方法不僅費時也耗成本，若能運用「晶片-封裝共同設計」的概念(Chip-Package Co-Design)，並且找到一個好的焊墊（Pad）擺放方式，不僅可以同時解決封裝上繞線的問題與晶片內部的問題，耗費設計成本及時程的問題也可隨之而解。
本論文即在「晶片-封裝共同設計方法」的概念上，提出「壅塞度為導向法」與「焊墊交換法」來同時解決封裝上的繞線壅塞度(Congestion)以及晶片內部壓降的問題；根據實驗結果證明，本論文所提出的方法確實可有效地同時解決上述的兩項問題，並適用於不同的測試電路上。 | zh_TW |
| dc.description.abstract | When semiconductor technology further scales into nanometer era, I/O-pad counts increase continually due to more and more function in chip. The locations of I/O pads not only affect the package design, but also change the noise inside the core. The traditional approaches solve these problems in package design flow and physical design flow respectively, which may have time-consuming and over-design problems. Using chip-package co-design method in pad assignment stage may be a practical approach to simultaneously solve these problems. A good pad assignment can improve the routing quality in packages and reduce the IR-drop in cores, which may solve the over-design problem and shorter the design cycle, too.
In this thesis, a chip-package co-design approach is proposed to reduce the routing congestion in packages. A pad switching algorithm is also proposed to control the routing congestion in packages and the IR-drop in cores at the same time. The experimental results of this work are encouraging. Compared with different approaches, our methodology reduces the routing congestion in packages and the IR-drop in cores simultaneously in all test circuits. | en_US |
| DC.subject | 壓降 | zh_TW |
| DC.subject | 兩層球閘陣列封裝 | zh_TW |
| DC.subject | 晶片-封裝共同設計方法 | zh_TW |
| DC.subject | 焊墊 | zh_TW |
| DC.subject | 壅塞度 | zh_TW |
| DC.subject | 繞線 | zh_TW |
| DC.subject | 擺放 | zh_TW |
| DC.subject | I/O | en_US |
| DC.subject | Chip-Package Co-Design | en_US |
| DC.subject | Finger | en_US |
| DC.subject | Pad | en_US |
| DC.subject | Placement | en_US |
| DC.subject | Congestion | en_US |
| DC.subject | IR-Drop | en_US |
| DC.subject | Routing | en_US |
| DC.title | 使用晶片-封裝共同設計方法最佳化兩層球閘陣列封裝中的焊墊排列方式 | zh_TW |
| dc.language.iso | zh-TW | zh-TW |
| DC.title | Optimal Pad Assignment for Two-Layer BGA Package Using Chip-Package Co-Design | en_US |
| DC.type | 博碩士論文 | zh_TW |
| DC.type | thesis | en_US |
| DC.publisher | National Central University | en_US |